

RaspiZeroCanDoCan
- Size
- 65 × 30 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 22
- Nets
- 19
- Pads
- 114
- Tracks, vias
- 249, 6
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 11 Mar 2017
- Updated
- 10 Oct 2020
Overview
RaspiZeroCanDoCan is an open-source printed circuit board by PhoenixRobotik, from the PhoenixRobotik/RaspiZeroCanDoCan repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 65 × 30 mm with 22 parts on 19 nets, routed with 249 tracks and 6 vias.
It is built around the MCP2562-H/P, LD1117S50TR(MS) and MCP2515-E/ST. Its parts include 6 capacitors, 6 resistors, 3 ICs and 2 connectors.
Main components
3MCP2562-H/P
PDIP-8-40℃~+150℃ 4.5V~5.5V PDIP-8 CAN Transceivers ROHSMicrochip TechnologyCAN TransceiversLD1117S50TR(MS)
SOT-223-20℃~+125℃@(Ta) 1 1.4V@(1A) 12V 1A 2mA 4.9V~5.1V Fixed Positive Thermal Shutdown SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMSKSEMIVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsMCP2515-E/ST
TSSOP-20-40℃~+125℃ 1Mbps 2.7V~5.5V 5mA CAN Controller TSSOP-20 CAN Controllers ROHSMicrochip TechnologyCAN Controllers
README
README.mdRaspiZeroCanDoCAN
A Raspberry Pi Zero (W) Shield to connect it to the PhoenixRobotik "CANdoEverything" bus. (Raspi is powered by 9V-bus)
Parts
22| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 4k7 | Resistors_SMD:R_0805_HandSoldering | R1, R2, R3 |
| 2 | 22pF | Capacitors_SMD:C_0805_HandSoldering | C2, C4 |
| 2 | C | Capacitors_SMD:C_0805_HandSoldering | C5, C6 |
| 2 | CAN_conn | Connectors_JST:JST_XH_B04B-XH-A_04x2.50mm_Straight | P6, P9 |
| 1 | 0 | Resistors_SMD:R_0805_HandSoldering | R6 |
| 1 | 100nF | Capacitors_SMD:C_0805_HandSoldering | C1 |
| 1 | 10uF | Capacitors_SMD:C_0805_HandSoldering | C3 |
| 1 | 150R | Resistors_SMD:R_0805_HandSoldering | R5 |
| 1 | 16MHz | Crystals:Crystal_HC49-4H_Vertical | OSC1 |
| 1 | 3v3 | LEDs:LED_0805 | LED_3v3_1 |
| 1 | 56R | Resistors_SMD:R_0805_HandSoldering | R4 |
| 1 | 5v | LEDs:LED_0805 | LED_5v_1 |
| 1 | LD1117S50TR | TO_SOT_Packages_SMD:SOT-223-3Lead_TabPin2 | U1 |
| 1 | MCP2515-E/ST | Housings_SSOP:TSSOP-20_4.4x6.5mm_Pitch0.65mm | U3 |
| 1 | MCP2562 | Housings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mm | IC1 |
| 1 | Raspberry_Pi_2_3 | RaspberryPiShields:RaspberryPi_Zero_Shield | Raspi1 |
The 21 most common of 22 parts.
Similar boards
- 2 layers65 × 40 mm

- 2 layers100 × 100 mm

- 4 layers100 × 82 mm

EMBARCADOS CURSO PCB
andremdaraujo/EMBARCADOS-CURSO-PCB
Projeto desenvolvido durante o curso Projeto de PCB para Sistemas Embarcados
175 parts9 - 2 layers90 × 102 mm

- 4 layers194 × 94 mm

- 2 layers26 × 59.3 mm

MHI ESP
dvisser/MHI-ESP-PCB
ESP8266 based WiFi module for MHI split-system air conditioners.
22 parts4GPL-3.0 - 2 layers89.7 × 53.5 mm

Ardui89 Cinque Uno
Cyrillinux/Ardui89
Adds 8051 architecture family to the Arduino IDE : STC89C52RC, STC89C516RD+, STC15W408AS-DIP16
57 parts2 - 4 layers85 × 54 mm

Questions
How big is the RaspiZeroCanDoCan PCB?
It measures 65 × 30 mm and has 2 copper layers, 1.6 mm thick.
What parts does the RaspiZeroCanDoCan use?
22 parts, built around the MCP2562-H/P, LD1117S50TR(MS) and MCP2515-E/ST. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the RaspiZeroCanDoCan KiCad files?
From the PhoenixRobotik/RaspiZeroCanDoCan repository on GitHub, at the commit this page was made from: the board is RaspiZeroCanDoCan.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the RaspiZeroCanDoCan design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).