
CSCvon8
DoctorWkt/CSCvon8
A crazy small 8-bit CPU built with only seventeen 7400-series chips.

A Z80 homebrew development board for experimentation
BeanZee is an open-source printed circuit board by PainfulDiodes, from the PainfulDiodes/BeanZee repository on GitHub, published under the MIT licence. It is a 2-layer board of 103.6 × 79.8 mm with 30 parts on 66 nets, routed with 844 tracks and 27 vias.
It is built around the UM245R, 74LS32SC and 74LS04PC. Its parts include 11 capacitors, 9 ICs, 5 connectors, 2 resistors and 1 switch. It belongs with the retro computing and games boards of this library.
A small Z80 based single-board-computer designed for experimentation.
Z80 CPU, 10 MHz clock, a simple reset circuit, 32K ROM, 32K RAM, FTDI UM245R USB module and the necessary glue logic.
Connectors provided for interfacing with the Z80: address, data, read, write, IO request, memory request, clock and reset.
The internal clock may be overridden by an external clock, and the internal memory and USB module may also be disabled via jumpers so that external devices can be used, or additional memory and IO selection logic added.
There is an accompanying Marvin simple monitor program which can be used to inspect and modify memory contents and load and execute a program from the host computer. Example programs can be found in BeanZeeBytes.
See also:









| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 0.1uF | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P2.50mm | C1, C2, C4, C5, C6, C7, C8, C9, C10, C11 |
| 2 | 74LS32 | Package_DIP:DIP-14_W7.62mm | U2, U4 |
| 1 | 100uF | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C3 |
| 1 | 10k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R2 |
| 1 | 220R | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1 |
| 1 | 74LS04 | Package_DIP:DIP-14_W7.62mm | U3 |
| 1 | 74LS244 | Package_DIP:DIP-20_W7.62mm | U1 |
| 1 | AS6C62256 (32kB SRAM) | Package_DIP:DIP-28_W15.24mm | U9 |
| 1 | AT28C256 (32kB ROM) | Package_DIP:DIP-28_W15.24mm | U6 |
| 1 | Address | Connector_PinSocket_2.54mm:PinSocket_1x16_P2.54mm_Vertical | J1 |
| 1 | Control | Connector_PinSocket_2.54mm:PinSocket_1x07_P2.54mm_Vertical | J3 |
| 1 | Data | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J2 |
| 1 | ECS-2200B-100 10MHz | Oscillator:Oscillator_DIP-8 | U8 |
| 1 | IORQ_enable | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | JP1 |
| 1 | MREQ_enable | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | JP2 |
| 1 | Power | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J4 |
| 1 | Reset | Button_Switch_THT:SW_PUSH_6mm_H5mm | SW1 |
| 1 | Reset | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J5 |
| 1 | UM245R | Package_DIP:DIP-24_W15.24mm | U7 |
| 1 | Z80CPU | Package_DIP:DIP-40_W15.24mm | U5 |

DoctorWkt/CSCvon8
A crazy small 8-bit CPU built with only seventeen 7400-series chips.



napicella/8-bit-computer
Resources for an 8 bit computer based on the 6502 micro processor

jes/scamp-cpu
A homebrew 16-bit CPU with a homebrew Unix-like-ish operating system.

The-Invent0r/8-bit-Computer-PCB
These are the KiCAD files for my 8-Bit Computer.


It measures 103.6 × 79.8 mm and has 2 copper layers, 1.6 mm thick.
30 parts, built around the UM245R, 74LS32SC and 74LS04PC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the PainfulDiodes/BeanZee repository on GitHub, at the commit this page was made from: the board is kicad/BeanZee.kicad_pcb and its schematic kicad/BeanZee.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).