
Brs flight computer
Big-Red-Sat/Big-Red-Sat-1
This repository contains the designs for the Big Red Sat-1, a 1U CubeSat examining the performance of perovskite solar cells in low earth orbit.

Vehicle Monitoring Unit
PatrolVMU is an open-source printed circuit board by PabloOyarzo, from the PabloOyarzo/PatrolVMU repository on GitHub. It is a 2-layer board of 43.8 × 57.5 mm with 54 parts on 64 nets, routed with 491 tracks and 39 vias.
It is built around the ESP32-C3, LM358ST and L7805, with the TLV7031DBV, BC549CTA and SMBJ26A among its other parts. Its parts include 24 resistors, 10 capacitors, 6 ICs, 3 diodes and 3 connectors. It belongs with the ESP32 and RISC-V boards of this library.
Vehicle Monitoring Unit
| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 10k | Capacitor_SMD:C_0805_2012Metric | R7, R9, R13, R15, R16, R17, R19 |
| 5 | 1k | Capacitor_SMD:C_0805_2012Metric | R3, R5, R6, R10, R12 |
| 4 | 4k7 | Capacitor_SMD:C_0805_2012Metric | R2, R4, R11, R14 |
| 3 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H1, H2, H3 |
| 2 | 0.1uF | Capacitor_SMD:C_0805_2012Metric | C8, C11 |
| 2 | 100nf | Capacitor_SMD:C_0805_2012Metric | C1, C3 |
| 2 | 10pF | Capacitor_SMD:C_0805_2012Metric | C9, C10 |
| 2 | 180k | Capacitor_SMD:C_0805_2012Metric | R23, R24 |
| 2 | BC549CTA | BC549CTA:BC33740TA | Q1, Q2 |
| 2 | SMBJ26A | Diode_SMD:D_SMB | D1, D2 |
| 2 | SolderJumper_2_Bridged | Jumper:SolderJumper-2_P1.3mm_Bridged2Bar_Pad1.0x1.5mm | JP1, JP2 |
| 1 | 0.001uF | Capacitor_SMD:C_0805_2012Metric | C12 |
| 1 | 100 | Resistor_SMD:R_2512_6332Metric | R18 |
| 1 | 10M | Capacitor_SMD:C_0805_2012Metric | R8 |
| 1 | 10nf | Capacitor_SMD:C_0805_2012Metric | C2 |
| 1 | 10uf | Capacitor_SMD:C_0805_2012Metric | C7 |
| 1 | 1M | Capacitor_SMD:C_0805_2012Metric | R22 |
| 1 | 1uF | Capacitor_SMD:C_0805_2012Metric | C13 |
| 1 | 2.4576M | Crystal:Crystal_HC49-4H_Vertical | Y1 |
| 1 | 200k | Capacitor_SMD:C_0805_2012Metric | R20 |
| 1 | 33k | Capacitor_SMD:C_0805_2012Metric | R21 |
| 1 | 6k8 | Capacitor_SMD:C_0805_2012Metric | R1 |
| 1 | C-OBD-II-16M | C-OBD-II-16M:COMTECH_C-OBD-II-16M | J1 |
| 1 | CD4060BNSR | CD4060BNSR:SOIC127P780X200-16N | U2 |
| 1 | Conn_01x03_Pin | Jumper:SolderJumper-3_P1.3mm_Bridged2Bar12_Pad1.0x1.5mm | J2 |
| 1 | Conn_02x06_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x06_P2.54mm_Vertical | J3 |
| 1 | ESP32-C3 | Waveshare-ESP32:Waveshare-ESP32-C3-Zero | U1 |
| 1 | INA226 | Package_SO:VSSOP-10_3x3mm_P0.5mm | U5 |
| 1 | L7805 | Package_TO_SOT_SMD:TO-263-2 | U3 |
| 1 | LM358ST | LM358ST:SOP65P490X110-8N | U4 |
| 1 | Red | LED_SMD:LED_0805_2012Metric | D4 |
| 1 | TLV7031DBV | Package_TO_SOT_SMD:SOT-23-5 | U6 |

Big-Red-Sat/Big-Red-Sat-1
This repository contains the designs for the Big Red Sat-1, a 1U CubeSat examining the performance of perovskite solar cells in low earth orbit.


CKalitin/analog-bms
1s2p Li-ion battery module with an analog battery management system (BMS).

nsm81/VehicleJunctionBox_PCBs
The junction box is an intermediate stage between the accumulator and inverter. It contains an HVD, a current sensor, discharge circuitry, TSAL and TSMPs.


darren4141/darrenliusite2
check out my website/portfolio @ https://darren4141.github.io/darrenliusite2/index.html


It measures 43.8 × 57.5 mm and has 2 copper layers, 1.6 mm thick.
54 parts, built around the ESP32-C3, LM358ST, L7805 and TLV7031DBV. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the PabloOyarzo/PatrolVMU repository on GitHub, at the commit this page was made from: the board is PatrolVMU.kicad_pcb and its schematic PatrolVMU.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask PabloOyarzo before reusing the design.