Skip to the content
12345

TLV7031DBV

Texas InstrumentsExtended

-40℃~+125℃ 1 1.6V~6.5V 100uV 1pA 2pA 315nA 3us 4.5ns 73dB 7V 7mV Built-in hysteresis Push-pull Rail-to-rail input SOT-23-5 Comparators ROHS

Part id
ti/TLV7031DBV
Category
Comparators
Package
SOT-23-5
Pins
5
In stock
87,342 at JLCPCB (C2869832)
Used on
12 open-source boards

Overview

The TLV7031DBV is a comparator made by Texas Instruments in a SOT-23-5 package with 5 pins. -40℃~+125℃ 1 1.6V~6.5V 100uV 1pA 2pA 315nA 3us 4.5ns 73dB 7V 7mV Built-in hysteresis Push-pull Rail-to-rail input SOT-23-5 Comparators ROHS.

PCBKit's library has its KiCad symbol (Comparator:TLV7031DBV, from KiCad's library) and its footprint (Package_TO_SOT_SMD:SOT-23-5, from KiCad's library), ready for a KiCad board. 87,342 are in stock at JLCPCB (part C2869832). 12 open-source boards in 11 repositories on GitHub use it.

Symbol

2V-5V+13+4-
Comparator:TLV7031DBVFrom KiCad's library

Footprint

12345
Package_TO_SOT_SMD:SOT-23-5From KiCad's library

From the datasheet

13
Supply, least
1.6 V · VCC – VEE, recommended operating min · p. 6
Supply, most
6.5 V · VCC – VEE, recommended operating max · p. 6
Supply, absolute maximum
7 V · VCC - VEE, absolute max · p. 6
Works from
-40 °C · Ambient temperature min · p. 6
Works up to
125 °C · Ambient temperature max · p. 6
Junction, hottest
150 °C · Junction temperature absolute max · p. 6
Takes working
335 nA · Supply current typical, VS = 1.8V, no load, output low · p. 8
Takes at most
900 nA · Supply current max, VS = 1.8V, no load, output low · p. 8
A pin gives at most
10 mA · Input pin current magnitude absolute max · p. 6
Junction to air (DBV (SOT-23))
297.2 K/W · Junction-to-ambient thermal resistance · p. 6
Junction to case (DBV (SOT-23))
224.7 K/W · Junction-to-case top thermal resistance · p. 6
Junction to board (DBV (SOT-23))
200.1 K/W · Junction-to-board thermal resistance · p. 6
Edge
4.5 ns · Rise time typical, 10% to 90%, VS = 5V, CL = 15pF · p. 8

What it is and has

4
Output
Push-pull · p. 1
Input range
Rail-to-rail common-mode · p. 1
Hysteresis
Internal · p. 1
Input behavior
No phase reversal for overdriven inputs · p. 1

Specifications

31
ParameterConditionsAs printedPage
Supply voltage VS = VCC - VEE VSOver operating free-air temperature rangemin -0.3 · max 7 V6
Input pins (IN+, IN-)Minimum VEE – 0.3 V; over operating free-air temperature rangemax 7 V6
Current into Input pins (IN+, IN-)±10 mAmax 10 mA6
Output short-circuit durationShort-circuit to ground, one comparator per packagemax 10 s6
Junction temperature, TJ TJmax 150 °C6
Storage temperature, Tstg Tstgmin -65 · max 150 °C6
Electrostatic discharge V(ESD)Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001; ±2000 Vmax 2000 V6
Electrostatic discharge V(ESD)Charged-device model (CDM), per JEDEC specification JESD22-C101; ±1000 Vmax 1000 V6
Supply voltage VS = VCC – VEE VSTLV7031; over operating free-air temperature rangemin 1.6 · max 6.5 V6
Ambient temperature, TA TAmin -40 · max 125 °C6
Junction-to-ambient thermal resistance RθJATLV7031, DBV (SOT-23), 5 pinstyp 297.2 °C/W6
Junction-to-case (top) thermal resistance RθJC(top)TLV7031, DBV (SOT-23), 5 pinstyp 224.7 °C/W6
Junction-to-board thermal resistance RθJBTLV7031, DBV (SOT-23), 5 pinstyp 200.1 °C/W6
Junction-to-top characterization parameter ΨJTTLV7031, DBV (SOT-23), 5 pinstyp 141.2 °C/W6
Junction-to-board characterization parameter ΨJBTLV7031, DBV (SOT-23), 5 pinstyp 198.9 °C/W6
Input Offset Voltage VIOVS = 1.8V and 5V, VCM = VS / 2; typical and maximum are ± magnitudestyp 0.1 · max 8 mV8
Hysteresis VHYSVS = 1.8V and 5V, VCM = VS / 2, TA = 25°Cmin 2 · typ 7 · max 17 mV8
Input bias current IBVS = 1.8V to 5V, VCM = VS / 2; typical at TA = 25°Ctyp 2 pA8
Input offset current IOSVS = 1.8V to 5V, VCM = VS / 2; typical at TA = 25°Ctyp 1 pA8
Output voltage high (for TLV7031 only) VOHVS = 5V, VEE = 0V, IO = 3mAmin 4.65 · typ 4.8 V8
Output voltage low VOLVS = 5V, VEE = 0V, IO = 3mAtyp 250 · max 350 mV8
Common-mode rejection ratio CMRRVEE < VCM < VCC, VS = 5Vtyp 73 dB8
Power supply rejection ratio PSRRVS = 1.8V to 5V, VCM = VS / 2typ 77 dB8
Short-circuit current ISCVS = 5V, sourcingtyp 29 mA8
Short-circuit current ISCVS = 5V, sinkingtyp 33 mA8
Supply current ICCVS = 1.8V, no load, VID = –0.1V (Output Low); typical at TA = 25°C, maximum over TA = –40°C to +125°Ctyp 335 · max 900 nA8
Propagation delay time, high to-low (RP = 2.5kΩ TLV7041 only) tPHLTLV7031; midpoint of input to midpoint of output, VOD = 100mV; TA = 25°C, VS = 5V, VCM = VS / 2, CL = 15pFtyp 3 us8
Propagation delay time, low-to high (RP = 2.5kΩ TLV7041 only) tPLHTLV7031; midpoint of input to midpoint of output, VOD = 100mV; TA = 25°C, VS = 5V, VCM = VS / 2, CL = 15pFtyp 3 us8
Rise time (TLV7031 only) tRMeasured from 10% to 90%; TA = 25°C, VS = 5V, VCM = VS / 2, CL = 15pF, input overdrive = 100mVtyp 4.5 ns8
Fall time tFMeasured from 10% to 90%; TA = 25°C, VS = 5V, VCM = VS / 2, CL = 15pF, input overdrive = 100mVtyp 4.5 ns8
Power-up time tONDuring power on, VCC must exceed 1.6V for 200 us before the output reflects the inputtyp 200 us8

Pins, by the datasheet

5
1 OUT
Output. · p. 3
2 V-
Negative Supply Voltage. · p. 3
3 IN+
Non-Inverting (+) Input. · p. 3
4 IN-
Inverting (-) Input. · p. 3
5 V+
Positive Supply Voltage. · p. 3

Open-source boards using it

12See all 12
  • 4 layers81.1 × 75 mmBrs flight computer, the printed circuit board in 3D

    Brs flight computer

    Big-Red-Sat/Big-Red-Sat-1

    This repository contains the designs for the Big Red Sat-1, a 1U CubeSat examining the performance of perovskite solar cells in low earth orbit.

    266 parts6
  • 2 layersRedstone lamp, the printed circuit board in 3D

    Redstone lamp

    QuantumKya/snapstone

    A project by: Artgod13, Theztezz, QuantumKya

    9 parts2
  • 2 layers42 × 22 mmAnalog bms, the printed circuit board in 3D

    Analog bms

    CKalitin/analog-bms

    1s2p Li-ion battery module with an analog battery management system (BMS).

    58 parts1MIT
  • 4 layers100 × 100 mmVehicleJunctionBoxMotherboard PCB, the printed circuit board in 3D

    VehicleJunctionBoxMotherboard PCB

    nsm81/VehicleJunctionBox_PCBs

    The junction box is an intermediate stage between the accumulator and inverter. It contains an HVD, a current sensor, discharge circuitry, TSAL and TSMPs.

    111 parts1
  • 2 layers53 × 34.2 mmPluto jtag adapter, the printed circuit board in 3D

    Pluto jtag adapter

    teodor961/pluto_jtag_adapter

    JTAG adapter board for the plutosdr board

    64 parts1
  • 4 layers55 × 60 mmPiComputeModuleBreakout, the printed circuit board in 3D

    PiComputeModuleBreakout

    darren4141/darrenliusite2

    check out my website/portfolio @ https://darren4141.github.io/darrenliusite2/index.html

    131 parts
  • 4 layers96 × 106 mmAnalogTwo, the printed circuit board in 3D

    AnalogTwo

    jeandet/Fusion

    154 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the TLV7031DBV?

Yes. The symbol is Comparator:TLV7031DBV and the footprint Package_TO_SOT_SMD:SOT-23-5, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the TLV7031DBV?

SOT-23-5, with 5 pins. Its footprint is drawn on this page.

Where is the TLV7031DBV datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the TLV7031DBV?

JLCPCB lists it as part C2869832, with 87,342 in stock; the sellers' links on this page open their listings.

What can replace the TLV7031DBV?

Parts like it in the library: the LMV331IDBV by Texas Instruments, the LMV331TP-TR by 3PEAK, the RS8901XF by Jiangsu RUNIC Tech and the TS391ILT by STMicroelectronics. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the TLV7031DBV?

12 boards in 11 repositories on GitHub; the most starred are listed on this page, with their KiCad files.