
ClimateController
Pablo-Ortiz-Lopez/ClimateController
ESP8266 based device which handles the climate of a room.

The LightDimmer is a versatile device designed to control the brightness of a single light fixture, supporting a load of up to 2A.
LightDimmer is an open-source printed circuit board by Pablo-Ortiz-Lopez, from the Pablo-Ortiz-Lopez/LightDimmer repository on GitHub. It is a 2-layer board of 61.8 × 50.9 mm with 16 parts on 24 nets, routed with 231 tracks and 5 vias.
It is built around the ESP-12F and BC547. Its parts include 6 resistors, 3 ICs, 3 connectors, 1 capacitor and 1 diode. It belongs with the ESP8266 boards of this library.
The LightDimmer is a versatile device designed to control the brightness of a single light fixture, supporting a load of up to 2A. This README provides a brief overview of the project's status and its available resources.
Work In Progress (WIP)
The LightDimmer project is currently a work in progress. As such, I am actively developing and refining its features, firmware, and hardware components. While the project is in its early stages, I recommend patience until a stable working prototype is achieved.
The LightDimmer aims to offer the following features once it reaches a stable state:
Dimmer Control: Control the brightness of a single light fixture, allowing you to set the ambiance and lighting level in your space with ease.
Remote Control: The LightDimmer can receive commands remotely, not only via Wi-Fi but also through ASK radio. This remote capability provides flexibility in how you manage your lighting, whether through a local network or other wireless means.
To support the development and utilization of the LightDimmer, I provide the following resources:
Firmware: The firmware for the LightDimmer is available as an ESPHome template YAML file. This file serves as a starting point for configuring and programming the device to enable dimmer control for your lighting unit.
Electronics: The electronic design of the LightDimmer can be found in the KiCad project files. These files enable you to understand and customize the hardware aspects of the device to fit your specific needs.
I welcome contributors who are interested in helping me refine and complete the LightDimmer project. If you have ideas, suggestions, or code improvements, please feel free to contribute.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 10K | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R2, R3, R4, R5 |
| 1 | 100nF | Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C1 |
| 1 | 1N4007 | Diode_SMD:D_SMA_Handsoldering | D1 |
| 1 | 1k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R6 |
| 1 | 433MHz_ASK_Superheterodyne_Receiver | AA_Footprints:RF Receiver | J1 |
| 1 | 5V07 Transformer | AA_Footprints:5V07 | U1 |
| 1 | AC Terminals | AA_Footprints:Terminal_KF128-4P | J3 |
| 1 | AC_Dimmer_4A | AA_Footprints:AC Dimmer 4A | U3 |
| 1 | BC547 | AA_Footprints:SOT-23-3-BC | Q1 |
| 1 | ESP-12F | AA_Footprints:ESP-12E_SMD_Simple | U2 |
| 1 | SANYOU_SRD_Form_C | Relay_THT:Relay_SPDT_SANYOU_SRD_Series_Form_C | K1 |
| 1 | Serial Terminals | Connector_JST:JST_PH_B6B-PH-K_1x06_P2.00mm_Vertical | J2 |

Pablo-Ortiz-Lopez/ClimateController
ESP8266 based device which handles the climate of a room.


greenMikeEU/shrdzm
SHRDZM (just a name, not an acronym) is an ESP8285/ESP8266 based sensor and actor integration platform.




Staacks/there.oughta.be
Projects featured on my blog at https://there.oughta.be

klein0r/pcb-ws2812-wifi-controller
WiFi Controller for WS2812 LED Stripes
It measures 61.8 × 50.9 mm and has 2 copper layers, 1.6 mm thick.
16 parts, built around the ESP-12F and BC547. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Pablo-Ortiz-Lopez/LightDimmer repository on GitHub, at the commit this page was made from: the board is electronics/LightDimmer.kicad_pcb and its schematic electronics/LightDimmer.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Pablo-Ortiz-Lopez before reusing the design.