2 layers128.3 × 50.8 mm
CD32 Controller
BleuLlama/AmigaSchematics
Schematics of various Commodore Amiga related items
33 parts58MIT
2 layers50 × 50 mm
Nestick
Ozzyboshi/Nestik1Nes/Snes arcade stick controller PCB
- Size
- 50 × 50 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 20
- Nets
- 21
- Pads
- 97
- Tracks, vias
- 201, 9
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 4 Jun 2021
- Updated
- 9 Jun 2021
Overview
Nestick is an open-source printed circuit board by Ozzyboshi, from the Ozzyboshi/Nestik repository on GitHub. It is a 2-layer board of 50 × 50 mm with 20 parts on 21 nets, routed with 201 tracks and 9 vias.
It is built around the 74LS165PC. Its parts include 5 connectors, 2 capacitors, 2 ICs, 1 resistor and 1 transistor. It belongs with the retro computing and games boards of this library.
Main components
1README
README.mdNestik
Parts
20| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 10k | Resistor_THT:R_Array_SIP5 | RN1, RN2, RN3, RN4 |
| 4 | HOLE | MountingHole:MountingHole_3.2mm_M3_Pad | H1, H2, H3, H4 |
| 2 | 100n | Capacitor_THT:C_Disc_D7.0mm_W2.5mm_P5.00mm | C1, C2 |
| 2 | 74LS165 | Package_DIP:DIP-16_W7.62mm_Socket_LongPads | U1, U2 |
| 1 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | 2N3904 | Package_TO_SOT_THT:TO-92_Inline | Q1 |
| 1 | CONN_BGND | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J5 |
| 1 | CONN_BTNS | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J4 |
| 1 | CONN_DGND | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | CONN_DIRS | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | CONN_EXT | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J1 |
| 1 | JP_MODE | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | JP1 |
Similar boards
- 2 layers128.6 × 81 mm
- 2 layers
Panel old
dankar/altair8800
What started as a Intel 8080 emulator turned into a Altair 8800 emulator with associated hardware for a front panel.
103 parts31MIT - 2 layers254 × 134.6 mm
- 4 layers180.3 × 211.3 mm
For real 486
Xeraster/32bit_486_motherboard
A completely DIY 486 motherboard. Even the chipset is a DIY fpga thing. This version has a 32 bit front side bus and a 16 bit ISA bis
256 parts18GPL-3.0 - 2 layers100 × 100 mm
1551-III Pico
ytmytm/1551-rePico
Commodore 1551 disk-drive replacement for Plus/4, C16 and C116: Pico2 + 6510T + CPLD in a Pi1551-III case, host via tcbm2sd. Firmware/GCR derived from 1541-rePico.
80 parts16GPL-3.0 - 2 layers85.1 × 31.8 mm
Esp01Expander
ruenahcmohr/esp_01Expand32
esp-01 (esp8266) IO expander, 16 output, 16 input = 32
20 parts15 - 2 layers75 × 50 mm
Questions
How big is the Nestick PCB?
It measures 50 × 50 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Nestick use?
20 parts, built around the 74LS165PC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Nestick KiCad files?
From the Ozzyboshi/Nestik repository on GitHub, at the commit this page was made from: the board is Nestick.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Nestick design in my own project?
Its repository states no licence, so its author keeps all rights: ask Ozzyboshi before reusing the design.