

Megadrivearcadestick
Megadrive Genesis joystick board
- Size
- 80 × 52 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 12
- Nets
- 15
- Pads
- 63
- Tracks, vias
- 124, 6
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 19 Apr 2021
- Updated
- 3 Jun 2021
Overview
Megadrivearcadestick is an open-source printed circuit board by Ozzyboshi, from the Ozzyboshi/Megadrivestick repository on GitHub. It is a 2-layer board of 80 × 52 mm with 12 parts on 15 nets, routed with 124 tracks and 6 vias.
It is built around the 74LS157PC. Its parts include 3 connectors, 1 capacitor, 1 resistor and 1 IC. It belongs with the keyboards and input boards of this library.
Main components
1README
README.mdMegadrivestick
Project description
Megadrive stick is an open hw implementation of a Megadrive controller (also known as Sega Genesis in the US).
You can take advantage of this little board to build your custom Sega arcade stick.
This implementation features the following inputs:
- up (with an extra pin if you want to map an additional button to the canonic up in your directional stick)
- down
- left
- right
- A Button
- B Button
- C Button
- Start Button
Bill of Materials (BOM)
Building this controller is very easy and very cheap, you will just need to solder this components:
- 1X HD74LS157P Multiplexer
- 1X 10K Resistor
- 2X A103J 10K Resistor Array
- 1X 100nF Capacitor
- 2X 9 pin row
- 1X DB9 Female PCB Mount connector
- 1X DB9 Male-Female extender
Support the Project
Since the project is open you are free to get the PCBs made by your preferred manufacturer, however in case you want to support the development, you can order them from PCBWay through this link:
Images

Final result using a simple electric box + some cheap buttons and directional pad from aliexpress. Final cost of materials about 20 Euros.

License
The Megadrivestick documentation, including the design itself, is copyright © Ozzyboshi 2020-2021.
Megadrivestick is Open Hardware licensed under the CERN OHL v. 1.2.
You may redistribute and modify this documentation under the terms of the CERN OHL v.1.2. This documentation is distributed as is and WITHOUT ANY EXPRESS OR IMPLIED WARRANTIES whatsoever with respect to its functionality, operability or use, including, without limitation, any implied warranties OF MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR PURPOSE or infringement. We expressly disclaim any liability whatsoever for any direct, indirect, consequential, incidental or special damages, including, without limitation, lost revenues, lost profits, losses resulting from business interruption or loss of data, regardless of the form of action or legal theory under which the liability may be asserted, even if advised of the possibility or likelihood of such damages.
A copy of the full license is included in file LICENSE.pdf, please refer to it for applicable conditions. In order to properly deal with its terms, please see file LICENSE_HOWTO.pdf.
The contact points for information about manufactured Products (see section 4.2) are listed in file PRODUCT.md.
Any modifications made by Licensees (see section 3.4.b) shall be recorded in file CHANGES.md.
The Documentation Location of the original project is https://github.com/Ozzyboshi/Megadrivestick/.
Thanks
Thanks to SukkoPera for his accurate review and suggestions on this project. Visit his awesome openhw page at https://github.com/SukkoPera
Parts
12| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 10K | Resistor_THT:R_Array_SIP5 | RN1, RN2 |
| 1 | 100nF | Capacitor_THT:C_Disc_D7.0mm_W2.5mm_P5.00mm | C1 |
| 1 | 10K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1 |
| 1 | 74LS157 | Package_DIP:DIP-16_W7.62mm_Socket | U1 |
| 1 | CTRL Grounds | footprints:PinHeader_1x09_ModSilkS | J1 |
| 1 | CTRLS | footprints:PinHeader_1x09_ModSilkS | J2 |
| 1 | DB9_Female_MountingHoles | footprints:DB_9F | J3 |
The 8 most common of 12 parts.
Similar boards
- 2 layers297.2 × 180.3 mm

- 2 layers365.1 × 203.2 mm

DIAG
Nakazoto/CenturionComputer
This is just a simple backup of all the files related to the Centurion that I have stored on my HD. The Wiki itself has far more in-depth information about the Centurion and it's individual cards.
150 parts172 - 2 layers370.8 × 298.5 mm

8 Bit Computer
The-Invent0r/8-bit-Computer-PCB
These are the KiCAD files for my 8-Bit Computer.
323 parts142 - 2 layers

- 2 layers100 × 71.5 mm

OpenAmiga500FastRamExpansion
SukkoPera/OpenAmiga500FastRamExpansion
4/8 MB Fast RAM Expansion for the Commodore Amiga 500
35 parts88 - 2 layers407 × 184 mm

TRS-80-Model I G E1
RetroStack/TRS-80-Model-I-G-E1
Hardware Replica of the TRS-80 Model I Revision G
230 parts57MIT - 2 layers74.4 × 72.5 mm

OpenAmiga600FastRamExpansion
SukkoPera/OpenAmiga600FastRamExpansion
4 MB Fast RAM Expansion for the Commodore Amiga 600
27 parts47 - 2 layers155.2 × 78.6 mm

80ColumnCard
btb/80ColumnCard
An Apple II 80-Column Card. Based on the Videx Videoterm
47 parts43Apache-2.0
Questions
How big is the Megadrivearcadestick PCB?
It measures 80 × 52 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Megadrivearcadestick use?
12 parts, built around the 74LS157PC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Megadrivearcadestick KiCad files?
From the Ozzyboshi/Megadrivestick repository on GitHub, at the commit this page was made from: the board is megadrivearcadestick.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Megadrivearcadestick design in my own project?
Its repository states no licence, so its author keeps all rights: ask Ozzyboshi before reusing the design.
