Skip to the content
2 layers44.6 × 128.5 mmLFO, the printed circuit board in 3D

A basic skewable LFO for Eurorack

Size
44.6 × 128.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
56
Nets
22
Pads
102
Tracks, vias
236, 9
Pours
4
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
30 Mar 2026
Updated
30 Mar 2026

Overview

LFO is an open-source printed circuit board by Owen-Patrick, from the Owen-Patrick/SoftSynthetics-LFO repository on GitHub. It is a 2-layer board of 44.6 × 128.5 mm with 56 parts on 22 nets, routed with 236 tracks and 9 vias.

It is built around the PJ301M-12. Its parts include 10 resistors, 6 capacitors, 4 diodes, 2 connectors and 1 IC. It belongs with the audio and music boards of this library.

Main components

1

README

README.md

A very Simple Skewable LFO eurorack Module

I designed this back in 2023 and ended up deciding to pursue more complex circuits. I have provided kicad project files and gerbers for both the main board and faceplate.

the module uses a three way siwtch to provide 3 different speeds. It has a triangle and square output with a skew knob which shifts the triagnle from a rising to falling saw and changes the pulse width of the square. N.B. using the skew function does impact the frequency of the LFO - maybe that sounds like fun to you.

All components are through hole and typical for any other diy eurorack module. It requires one tl074 quad op-amp and a handfull of other components

I don't recall any major issues but do not promise anything - please double check things for yourself. The capacitor values I provided where a little too small which caused rather high frequency waves so please experiment with the values yourself!

TODO Make a nicer readme

See more at softsynthetics.com

Parts

56
QtyValueFootprintReferences
41N4148Diode_THT:D_DO-35_SOD27_P7.62mm_HorizontalD1, D2, D3, D4
310kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR2, R9, R10
2100KPotentiometer_THT:Potentiometer_Alpha_RD901F-40-00D_Single_VerticalPitch1, Skew1
2100kResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_VerticalR4, R6
2100nFCapacitor_THT:C_Disc_D5.0mm_W2.5mm_P2.50mmC3, C4
210kEurorack:verticalTokyoDenshiAmp1, Amp2
21kResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_VerticalR5, R8
2CPCapacitor_THT:CP_Radial_D6.3mm_P2.50mmC5, C6
2C_SmallCapacitor_THT:C_Disc_D3.8mm_W2.6mm_P2.50mmC7, C8
2G***kibuzzard-69CA9D7Dkibuzzard-69CA9D7D, kibuzzard-69CA9D7D
2G***kibuzzard-69CA9DD5kibuzzard-69CA9DD5, kibuzzard-69CA9DD5
2G***kibuzzard-69CA9CDAkibuzzard-69CA9CDA, kibuzzard-69CA9CDA
2G***kibuzzard-69CA9CFBkibuzzard-69CA9CFB, kibuzzard-69CA9CFB
2PJ301M-12Connector_Audio:Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHolesJ1, J2
1100KResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_VerticalR1
1100nCapacitor_THT:C_Rect_L7.0mm_W3.5mm_P5.00mmCHi1
110kResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_VerticalR3
110uFCapacitor_THT:C_Rect_L7.0mm_W3.5mm_P5.00mmCMed1
11uFCapacitor_THT:C_Rect_L7.0mm_W3.5mm_P5.00mmCLo1
139kResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_VerticalR7
1G***kibuzzard-69CA9E38kibuzzard-69CA9E38
1G***kibuzzard-69CA9ED6kibuzzard-69CA9ED6
1G***kibuzzard-69CA9DFDkibuzzard-69CA9DFD
1G***kibuzzard-69CA9D64kibuzzard-69CA9D64
1G***kibuzzard-69CA9E16kibuzzard-69CA9E16
1G***kibuzzard-69CA9EAAkibuzzard-69CA9EAA
1G***kibuzzard-69CA9E95kibuzzard-69CA9E95
1G***kibuzzard-69CA9E5Dkibuzzard-69CA9E5D
1G***kibuzzard-69CA9E49kibuzzard-69CA9E49
1PIN_HEADER_2x5Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_VerticalH1
1SPDT_mountEurorack:SPDT_mountRange
1SW_SPDTEurorack:SPDTSW1
1TL074Package_DIP:DIP-14_W7.62mm_LongPadsU1

The 50 most common of 56 parts.

Similar boards

  • 2 layers84.5 × 128.5 mmSchraeg, the printed circuit board in 3D

    Schraeg

    barnabywalters/Schraeg

    An 8HP eurorack multimode filter module based on the Bastl Cinnamon

    116 parts43CC-BY-SA-4.0
  • 2 layers40 × 107.5 mmUtf-8-samplified, the printed circuit board in 3D

    Utf-8-samplified

    wgd-modular/utf-8-samplified

    Arduino nano sample based 8-channel drum module

    70 parts42
  • 2 layers162.6 × 100.3 mmQuad Tube VCA, the printed circuit board in 3D

    Quad Tube VCA

    ob1techno/valvs

    A cascading quad tube VCA module in Eurorack format.

    228 parts37
  • 2 layers100 × 70 mmUtf-9-samplified, the printed circuit board in 3D

    Utf-9-samplified

    wgd-modular/utf-9-samplified

    A standalone drum machine based on the bleep drum.

    27 parts19
  • 16 layers39.6 × 110.9 mmClocker-12b, the printed circuit board in 3D

    Clocker-12b

    4ms/pcb-RCD-SCM-clocker

    PCB for RCD and SCM, kit and pre-built versions

    84 parts9
  • 2 layers48.3 × 99.1 mmModulation source, the printed circuit board in 3D

    Modulation source

    JordanAceto/modulation_source

    Eurorack compatible pcb with sine/square VCLFO, white and pink noise, and sample & hold

    95 parts6
  • 2 layers59.1 × 110.7 mmQPLFO v22, the printed circuit board in 3D

    QPLFO v22

    4ms/QPLFO-v22

    QPLFO source code for PCB v2.2 and later

    191 parts5
  • 2 layers58.4 × 99.1 mmFilter Carrier Board, the printed circuit board in 3D

    Filter Carrier Board

    JordanAceto/Filter_Carrier_Board

    PCB carrier board for various VCF plug-in boards

    43 parts5CC-BY-4.0

Questions

How big is the LFO PCB?

It measures 44.6 × 128.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the LFO use?

56 parts, built around the PJ301M-12. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the LFO KiCad files?

From the Owen-Patrick/SoftSynthetics-LFO repository on GitHub, at the commit this page was made from: the board is LFO.kicad_pcb and its schematic LFO.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the LFO design in my own project?

Its repository states no licence, so its author keeps all rights: ask Owen-Patrick before reusing the design.