2 layers40 × 107.5 mm
Utf-8-samplified
wgd-modular/utf-8-samplified
Arduino nano sample based 8-channel drum module
70 parts42
2 layers58.4 × 99.1 mm
Filter Carrier Board
JordanAceto/Filter_Carrier_Board5PCB carrier board for various VCF plug-in boards
- Size
- 58.4 × 99.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 43
- Nets
- 23
- Pads
- 136
- Tracks, vias
- 175, 25
- Pours
- 7
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 1 Feb 2020
- Updated
- 6 Jan 2022
Overview
Filter Carrier Board is an open-source printed circuit board by JordanAceto, from the JordanAceto/Filter_Carrier_Board repository on GitHub, published under the CC-BY-4.0 licence. It is a 2-layer board of 58.4 × 99.1 mm with 43 parts on 23 nets, routed with 175 tracks and 25 vias.
It is built around the TL072 and PJ301M-12. Its parts include 14 capacitors, 12 resistors, 10 connectors and 3 ICs. It belongs with the computers and single-board computers boards of this library.
Main components
2README
README.mdPCB carrier board for VCF plug-in boards.
SCHEMATIC
This PCB is designed to accomodate various filter boards documented elsewhere on my github page. Pots and jacks are mounted on this board, which can be affixed to a Eurorack panel. This way you can have one carrier board/panel, and swap in various VCF designs.
A 12hp pcb panel is included in this repo as a cheap panel option.
Since the panal and panel-mount components are typically a large expense in a synth module, this allows you to evaluate and experiment with different filter designs economically.
Various plug-in boards have already been designed as part of a different project, and this seemed like an easy way to leverage an existing design in order to mess around with a Eurorack setup.
Here is a link to the repository of the plug-in boards: LINK
Status of the project:
| Task | Status |
|---|---|
| Schematic capture | ☑ |
| PCB layout | ☑ |
| Test build | ☑ |
| Safe to order boards | ☑ |
Parts
43| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 100k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1, R2, R4, R5, R7, R8, R9, R10 |
| 8 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C7, C8, C9, C10, C11, C12, C13, C14 |
| 5 | PJ301M-12 | Eurocad:PJ301M-12 | J1, J2, J3, J4, J5 |
| 4 | 100pF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1, C2, C3, C4 |
| 2 | 100k | Potentiometer_THT:Potentiometer_Alpha_RD901F-40-00D_Single_Vertical_CircularHoles | RV2, RV4 |
| 2 | 10k | Potentiometer_THT:Potentiometer_Alpha_RD901F-40-00D_Single_Vertical_CircularHoles | RV1, RV3 |
| 2 | 10uF | Capacitor_SMD:CP_Elec_5x5.4 | C5, C6 |
| 2 | TL072 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1, U2 |
| 1 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R14 |
| 1 | 22k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R6 |
| 1 | 47k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R11 |
| 1 | 50k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R3 |
| 1 | MAX6035xxUR50 | Package_TO_SOT_SMD:SOT-23_Handsoldering | U3 |
| 1 | cv_in | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J8 |
| 1 | power_and_rez_cv_in | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J9 |
| 1 | power_in | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | J10 |
| 1 | signal_in | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J6 |
| 1 | signal_out | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J7 |
Similar boards
- 2 layers162.6 × 100.3 mm
- 16 layers39.6 × 110.9 mm
- 2 layers48.3 × 99.1 mm
Modulation source
JordanAceto/modulation_source
Eurorack compatible pcb with sine/square VCLFO, white and pink noise, and sample & hold
95 parts6 - 4 layers71.1 × 99.1 mm
- 2 layers58.4 × 99.1 mm
2164SVF
JordanAceto/SSM2164-SVF
State variable filter with audio and super low frequency modes
77 parts4CC-BY-4.0 - 2 layers29.5 × 108.6 mm
MiniDJ Main
Thorinair/Avalon-Harmonics
A collection of Avalon Harmonics branded synthesizer modules.
107 parts26CC-BY-SA-4.0 - 4 layers134.6 × 113 mm
JordanAceto micro pico micro pico
punkfab/pcb-corpus
235 real KiCad boards from open-source hardware repositories, prepared as a placement and routing benchmark
333 parts1
Questions
How big is the Filter Carrier Board PCB?
It measures 58.4 × 99.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Filter Carrier Board use?
43 parts, built around the TL072 and PJ301M-12. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Filter Carrier Board KiCad files?
From the JordanAceto/Filter_Carrier_Board repository on GitHub, at the commit this page was made from: the board is main_pcb/kicad_docs/filter_carrier_board.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Filter Carrier Board design in my own project?
Its repository publishes it under the CC-BY-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).