4 layers77.8 × 63.2 mm
Flatmcu
GyrocopterLLC/flatmcu
Hardware design for the flatmcu - an STM32G4 based BLDC / FOC motor controller.
127 parts40MIT
4 layers100 × 50 mm
AltReg CAN
Open-Source-Alternator-Regulator/alt-CADSupport Files for the Alternator Regulator
- Size
- 100 × 50 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 156
- Nets
- 92
- Pads
- 474
- Tracks, vias
- 963, 150
- Pours
- 41
- Routed
- Yes
- KiCad
- KiCad 3
- Created
- 20 Jan 2019
- Updated
- 20 Jan 2019
Overview
AltReg CAN is an open-source printed circuit board by Open-Source-Alternator-Regulator, from the Open-Source-Alternator-Regulator/alt-CAD repository on GitHub. It is a 4-layer board of 100 × 50 mm with 156 parts on 92 nets, routed with 963 tracks and 150 vias.
It is built around the MCP2562-H/P, FT230XS-R and INA282AID, with the MAX5033DASA+, MC78M05CDTG and NCV1124D among its other parts. Its parts include 42 resistors, 30 capacitors, 21 diodes, 16 connectors and 9 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
12
MCP2562-H/P
PDIP-8-40℃~+150℃ 4.5V~5.5V PDIP-8 CAN Transceivers ROHSMicrochip TechnologyCAN Transceivers
FT230XS-R
SSOP-16-150mil-40℃~+85℃ 125uA 3.3V~5V 8mA USB 2.0 USB to UART SSOP-16-150mil USB Converters ROHSFTDIUSB Converters
INA282AID
SOIC-8-14V~80V -40℃~+125℃ 0.3uV/℃ 1 10kHz 110nV/√Hz@1kHz 140dB 2.7V~18V 20uV 25uA 50V/V 600uA High-side detection、Low-side detection、Bidirectional detection、Zero drift / auto-zero、Programmable output reference level ±5V SOIC-8 Current Sense Amplifiers ROHSTexas InstrumentsCurrent Sense AmplifiersMAX5033DASA+
SOIC-8-40℃~+125℃@(TJ) 1 1.221V~13.2V 125kHz 270uA 500mA 7.5V~76V Adjustable Buck Buck Built-in No SOIC-8 DC-DC Converters ROHSMaxim Integrated (Analog Devices)DC-DC Converters
MC78M05CDTG
DPAK0℃~+125℃@(Tj) 1 2V@(350mA) 3.2mA 35V 40uV 500mA 5V 62dB@(120Hz) Fixed Over Current Protection、Over Temperature Protection、Short Circuit Protection Positive DPAK Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSonsemiVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsNCV1124D
SOIC-82 5V SOIC-8 ADCs/DACs - Special Purpose ROHSonsemiADCs/DACs - Special Purpose
ESD5Z5.0T1G
SOD-523174W@8/20us 18.6V 50nA 5V 6.2V 80pF 9.4A@8/20us ESD IEC 61000-4-2、IEC 61000-4-4 Unidirectional SOD-523 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)
S110
SOD-123100V 100uA@100V 1A 850mV@1A Independent SOD-123 Schottky Diodes ROHSYangzhou Yangjie Electronic TechnologySchottky Diodes
SMAJ64A
SMA-65℃~+150℃ 103V 1uA 3.9A@10/1000us 400W@10/1000us 64V 78.6V TVS SMA ESD and Surge Protection (TVS/ESD) ROHSShandong Jingdao MicroelectronicsESD And Surge Protection (TVS/ESD)
BAT54S
SOT-231 Pair Series Connection 1V@100mA 200mA 2uA@25V 30V 600mA SOT-23 Schottky Diodes ROHSMDDSchottky Diodes
CG0603MLC-05E
0603-55℃~+125℃ 0.2pF 1 10nA 30V 5V Bidirectional IEC 61000-4-2 0603 ESD and Surge Protection (TVS/ESD) ROHSBournsVaristors
FSV20100V
TO-277B100V 100uA@100V 20A 660mV@20A Independent TO-277B Schottky Diodes ROHSFUXINSEMISchottky Diodes
README
README.mdCAD
Hardware design files for Alternator Regulator
Parts
156| Qty | Value | Footprint | References |
|---|---|---|---|
| 20 | VIA | 02mm_via | V1, V2, V3, V4, V5, V10, V11, V12, V13, V14, V15, V16, V17, V18, V19, V20 +4 |
| 15 | 100nF | SM0805 | C2, C5, C9, C10, C12, C13, C16, C17, C19, C20, C22, C25, C26, C27, C28 |
| 8 | 10K | SM0603_Resistor | R17, R20, R21, R24, R35, R36, R37, R38 |
| 6 | 100 | SM0603_Resistor | R27, R30, R32, R33, R34, R41 |
| 6 | 1K | SM0603_Resistor | R8, R18, R19, R22, R40, R42 |
| 5 | ESD5Z5.0T1G | sod523 | D6, D9, D13, D15, D16 |
| 4 | 0.47uF | SM0805 | C14, C21, C23, C30 |
| 4 | 10 | SM0603_Resistor | R2, R9, R26, R29 |
| 4 | HOLE | hole_3mm | H1, H2, H3, H4 |
| 3 | 0 | SM0603_Resistor | R3, R10, R16 |
| 3 | 150pF | SM0805 | C4, C11, C29 |
| 3 | 1M | SM0603_Resistor | R6, R23, R43 |
| 3 | 37.8K | SM0603_Resistor | R4, R7, R31 |
| 3 | 4.7uF | SM1206 | C15, C18, C24 |
| 3 | GND-Opt | Solder_trace | J8, J9, J10 |
| 3 | S110 | sod123HE | D12, D14, D17 |
| 3 | SMAJ64A | do214ac | D1, D2, D18 |
| 2 | 27 | SM0603_Resistor | R12, R13 |
| 2 | 4.99K | SM0603_Resistor | R14, R15 |
| 2 | 47pF | SM0603_Capa | C6, C7 |
| 2 | BAT54S | SOT23 | D7, D11 |
| 2 | CG0603MLC-05E | SM0603 | D3, D4 |
| 2 | FSV20100V | TO277-DIODE | D8, D19 |
| 2 | RJ45 | RJ45_8 | J5, J7 |
| 2 | TPW4R50ANH | DSOP-8 | Q3, Q4 |
| 2 | VAL** | fiducial_075_300_round | fiducial_075_300_round, fiducial_075_300_round |
| 1 | 100K | SM0603_Resistor | R39 |
| 1 | 10K NTC | SM0402 | TH1 |
| 1 | 10uH | SM0805 | L1 |
| 1 | 120 | SM1210 | R28 |
| 1 | 16Mhz | resonator_smd | X1 |
| 1 | 20K 0.1% | SM0805 | R5 |
| 1 | 221 | SM0603_Resistor | R11 |
| 1 | 30K 0.1% | SM0805 | R1 |
| 1 | 4.7nF | SM0603_Capa | C1 |
| 1 | 47uF/100v | CP_10x16mm | C31 |
| 1 | 56uF | CP_6.3x11mm | C32 |
| 1 | 680uH | INDUCTOR_LRS | L2 |
| 1 | A | JST-B2B-XH-A | K2 |
| 1 | ATMEGA64M1-Ax | TQFP32 | U6 |
| 1 | B | JST-B2B-XH-A | K1 |
| 1 | CAN | PCB_Terminal_3.81mm_3pin | P5 |
| 1 | CONN_4 | mkds_1,5-4 | P2 |
| 1 | CONN_5 | mkds_1,5-5 | P3 |
| 1 | CONN_6 | mkds_1,5-6 | P6 |
| 1 | FT230X-S | ssop-16 | U4 |
| 1 | I2C | PIN_ARRAY_2X1 | J2 |
| 1 | ICSP | pin_array_3x2 | P4 |
| 1 | INA226 | MSOP10-0.5 | U3 |
| 1 | INA282 | SO8E | U2 |
| 1 | LED | LED-5MM-DUAL | D22 |
| 1 | MAX5033D | SO8E | U10 |
| 1 | MC78M05CDT | DPAK2 | U9 |
| 1 | MCP2562 | SO8E | U8 |
| 1 | MIC4604 | SO8E | U7 |
| 1 | NCV1124 | so-8 | U5 |
| 1 | NUP2105L | SOT23 | D21 |
| 1 | NZT605 | sot223 | Q1 |
| 1 | SMAJ30A | do214ac | D5 |
| 1 | SSA210 | DO-214AC(SMA) | D20 |
| 1 | SW_DIP-8 | SWDIP8u | S1 |
| 1 | T3904 | SOT23 | Q2 |
| 1 | TERM | PIN_ARRAY_2X1 | J6 |
| 1 | USB | PIN_ARRAY_5x1 | P1 |
| 1 | USB_MICRO | conn_usb_B_micro_vertical | J4 |
| 1 | USB_MICRO | conn_usb_B_micro_vertical_TH | J3 |
| 1 | VBat-Shunt | Solder_trace | J1 |
| 1 | Vdd | PINTST | TP1 |
Similar boards
- 2 layers108 × 57.5 mm
- 2 layers30.5 × 30.4 mm
HarnessBox
kriptomad/PandaH7Openpilot
[dev history] Hybrid Panda STM32H725 PCB working tree. Release repo: github.com/kriptomad/openpilot-honda-city-brasil
13 parts1 - 4 layers80 × 55 mm
- 4 layers32 × 50 mm
J533DreamPCB
lukasloetkolben/OpenpilotHardware
Welcome to the Openpilot Hardware Collection!
10 parts95MIT - 2 layers36.6 × 28.3 mm
- 2 layers68 × 58 mm
- 2 layers101.6 × 114.3 mm
Questions
How big is the AltReg CAN PCB?
It measures 100 × 50 mm and has 4 copper layers, 1.6 mm thick.
What parts does the AltReg CAN use?
156 parts, built around the MCP2562-H/P, FT230XS-R, INA282AID and MAX5033DASA+. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the AltReg CAN KiCad files?
From the Open-Source-Alternator-Regulator/alt-CAD repository on GitHub, at the commit this page was made from: the board is CAD-files/AltReg-CAN.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the AltReg CAN design in my own project?
Its repository states no licence, so its author keeps all rights: ask Open-Source-Alternator-Regulator before reusing the design.