2 layers96 × 69 mm
Home Automation
Omverma3210/home_automation_6_triacs
A home automation contains 6 triac switches
47 parts
2 layers71.4 × 66.2 mm
Home Automation
Omverma3210/Home-AutomationA smart home automation switch based on triac
- Size
- 71.4 × 66.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 89
- Nets
- 72
- Pads
- 211
- Tracks, vias
- 353, 18
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 12 Sep 2024
- Updated
- 16 Sep 2024
Overview
Home Automation is an open-source printed circuit board by Omverma3210, from the Omverma3210/Home-Automation repository on GitHub. It is a 2-layer board of 71.4 × 66.2 mm with 89 parts on 72 nets, routed with 353 tracks and 18 vias.
It is built around the ESP-12E, BTA16-600B and HLK-PM01, with the MOC3010M, AMS1117-3.3 and EL817 among its other parts. Its parts include 36 resistors, 14 capacitors, 8 ICs, 5 transistors and 1 diode. It belongs with the home automation and IoT boards and the ESP8266 boards of this library.
Main components
6
ESP-12E
SMD,24x16mm-20℃~+70℃ -90dBm 16dBm 170mA 2.4GHz 3V~3.6V 56mA 802.11b/g/n ESP8266 Chip On-board PCB Antenna Over-the-air (OTA) update UART、SPI、I2C SMD,24x16mm WiFi Modules ROHSAi-ThinkerWiFi Modules
BTA16-600B
TO-220A-40℃~+125℃ 1 TRIAC 1.5V 160A@20ms 16A 1V 500mW 50mA 600V 60mA TO-220A Thyristors (SCR)/Modules ROHSKTPThyristors (SCR)/Modules
HLK-PM01
DIP,34x24mm0.1W 100mVp-p 15mm 20mm 34mm 3W 3kV 5V 700mA 73% 85VAC~265VAC AC-DC Short Circuit Protection、Over Current Protection、Fault self-recovery ±0.2% 插件,34x20mm AC-DC Power Modules ROHSHI-LINKAC-DC Power Modules
MOC3010M
DIP-6-40℃~+85℃ 1 1.15V 250V 4.17kV 60mA No TRIAC DIP-6 Triac, SCR Output Optoisolators ROHSonsemiTriac, SCR Output Optoisolators
AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
EL817
DIP-4-55℃~+110℃ 1 1.2V 100mV@20mA,1mA 18us 18us 5.8mA 50% 50V 5kV 600% 9V Phototransistor DIP-4 Transistor, Photovoltaic Output Optoisolators ROHSEverlight ElectronicsTransistor, Photovoltaic Output Optoisolators
README
README.mdHome-Automation
A smart home automation switch based on triac
Parts
89| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | 10K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5, R6, R7, R8, R9, R10, R14, R16, R28, R29, R34, R35, R36 |
| 10 | 330R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R3, R12, R13, R18, R19, R25, R26, R31, R32 |
| 8 | TestPoint | TestPoint:TestPoint_Loop_D3.80mm_Drill2.0mm | TP1, TP4, TP6, TP14, TP15, TP17, TP21, TP26 |
| 7 | TestPoint | TestPoint:TestPoint_Pad_1.0x1.0mm | TP3, TP8, TP9, TP10, TP11, TP12, TP13 |
| 6 | TestPoint | TestPoint:TestPoint_THTPad_D2.0mm_Drill1.0mm | TP18, TP19, TP20, TP22, TP23, TP24 |
| 5 | 10nf | Capacitor_THT:C_Rect_L13.0mm_W3.0mm_P10.00mm_FKS3_FKP3_MKS4 | C1, C5, C7, C9, C13 |
| 5 | 39R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4, R15, R21, R27, R33 |
| 5 | 470R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R11, R17, R24, R30 |
| 5 | 50nf | Capacitor_THT:C_Rect_L13.0mm_W3.0mm_P10.00mm_FKS3_FKP3_MKS4 | C2, C6, C8, C10, C14 |
| 5 | BTA16-600B | Package_TO_SOT_THT:TO-220-3_Vertical | Q1, Q2, Q3, Q4, Q5 |
| 5 | MOC3010M | Package_DIP:DIP-6_W7.62mm | U1, U2, U4, U6, U8 |
| 2 | 100nf | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C3, C4 |
| 2 | 47K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R20, R23 |
| 2 | SolderJumper_2_Open | my_foot:my_foot | JP1, JP2 |
| 1 | 10uf | Capacitor_SMD:C_0805_2012Metric | C11 |
| 1 | 1uf | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C12 |
| 1 | 2K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R22 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U7 |
| 1 | EL817 | Package_DIP:DIP-4_W7.62mm | U9 |
| 1 | ESP-12E | RF_Module:ESP-12E | U3 |
| 1 | Fuse | Fuse:Fuseholder_Cylinder-5x20mm_Schurter_0031_8201_Horizontal_Open | F1 |
| 1 | HLK-PM01 | HLK-PM01:CONV_HLK-PM01 | PS1 |
| 1 | MB10F-13 | MB10F-13:DIOB_MB10F-13 | D1 |
Similar boards
- 2 layers99.1 × 58.4 mm
HEAT
milar111/HEAT
An open-source STM32 SMD assembly station for precision soldering. Uses a custom Smart Pulse & Coast algorithm to drive 400W mains heaters via SSR. Features OLED UI, NTC feedback, and safety cooling.
57 parts9 - 4 layers230 × 196.7 mm
Steel form Dish washer
R-Mutura/DISHWASHER
Contains hardware and Software implementation of a dishwasher product
156 parts - 2 layers165 × 85 mm
Sprinkler System
Swamp-Ig/Sprinkler-System
PCB design for five zone sprinkler system. For ESPHome with an Esp32 module.
80 parts - 2 layers80.6 × 48.3 mm
AC control
wvmarle/AC_control
Arduino library for AC phase controller with peak detection.
17 parts3MIT - 2 layers100 × 100 mm
Dreidel controller
restifo/dreidel_PCB
PCB files and schematics for a light controller for dreidel lights
86 parts - 2 layers100 × 60 mm
Hotplate soldering
Arnaud-Apu-Fanovard/Hotplate-soldering
Hotplate soldering for PCB SMD componants for diyPCB
46 parts - 2 layers70 × 56 mm
Questions
How big is the Home Automation PCB?
It measures 71.4 × 66.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Home Automation use?
89 parts, built around the ESP-12E, BTA16-600B, HLK-PM01 and MOC3010M. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Home Automation KiCad files?
From the Omverma3210/Home-Automation repository on GitHub, at the commit this page was made from: the board is Home_automation.kicad_pcb and its schematic Home_automation.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Home Automation design in my own project?
Its repository states no licence, so its author keeps all rights: ask Omverma3210 before reusing the design.