Skip to the content
2 layers40.1 × 32 mmGraduation Project, the printed circuit board in 3D

MCU DataLogger board based on the ATmega328P-AU — featuring dual 24LC1025 EEPROM, DS1337S RTC, UART/SPI/I2C interface connectors, and indicator LEDs. Designed in KiCAD as the IMT PCB Design Diploma graduation project. Gerbers included.

Size
40.1 × 32 mm
Copper layers
2
Thickness
1.6 mm
Parts
27
Nets
34
Pads
115
Tracks, vias
422, 35
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
28 May 2026
Updated
28 May 2026

Overview

Graduation Project is an open-source printed circuit board by OmarAtef2003, from the OmarAtef2003/DataLogger-Board repository on GitHub. It is a 2-layer board of 40.1 × 32 mm with 27 parts on 34 nets, routed with 422 tracks and 35 vias.

It is built around the 24LC1025-I/P and DS1337S+T&R. Its parts include 8 resistors, 6 capacitors, 4 ICs, 2 diodes and 2 crystals. It belongs with the sensors and measurement and interfaces and adapters boards and the AVR (ATmega, ATtiny) boards of this library.

Main components

2

README

README.md
image image image

Parts

27
QtyValueFootprintReferences
40.1uFCapacitor_Tantalum_SMD:CP_EIA-3216-18_Kemet-AC1, C2, C6, C7
44.7kResistor_SMD:R_0805_2012MetricR8, R9, R10, R11
210kResistor_SMD:R_0805_2012MetricR1, R12
222pFCapacitor_Tantalum_SMD:CP_EIA-3216-18_Kemet-AC3, C4
224LC1025Package_SO:SOIC-8_3.9x4.9mm_P1.27mmU2, U3
2330Resistor_SMD:R_0805_2012MetricR2, R3
2Conn_01x04_PinConnector_PinHeader_2.00mm:PinHeader_1x04_P2.00mm_VerticalI2C, UART
2LEDLED_SMD:LED_1206_3216MetricD1, D3
116MHzCrystal:Crystal_SMD_0603-2Pin_6.0x3.5mm_HandSolderingY2
133kHzCrystal:Crystal_SMD_0603-2Pin_6.0x3.5mm_HandSolderingY1
1ATMEGA328P-AURPackage_QFP:TQFP-32_7x7mm_P0.8mmU1
1Conn_01x09_PinConnector_PinHeader_2.00mm:PinHeader_1x09_P2.00mm_VerticalGPIO
1Conn_02x03_Odd_EvenConnector_PinHeader_2.00mm:PinHeader_2x03_P2.00mm_VerticalSPI
1DS1337S_Package_SO:SOIC-8_3.9x4.9mm_P1.27mmU4

The 26 most common of 27 parts.

Similar boards

  • 2 layers50.2 × 31.2 mmMCU Datalogger, the printed circuit board in 3D

    MCU Datalogger

    futureshocked/KLP4e_MCU-Datalogger

    This is the repository for the "MCU Datalogger" project.

    31 parts138MIT
  • 2 layers42.7 × 24.4 mmBACEE, the printed circuit board in 3D

    BACEE

    futureshocked/KicadLikeAPro-Project-3-BACEE

    This is one of the PCB projects from the Kicad Like a Pro book. It contains a two and four layer board that implements an Arduino clone with external EEPROM and a clock.

    20 parts19MIT
  • 4 layers49.3 × 34.1 mmDattalogger Board, the printed circuit board in 3D

    Dattalogger Board

    DevMajed/DataLogger-Board

    Hardware PCB Design for AVR-based Datalogger using KiCAD

    30 parts4
  • 2 layers41.4 × 27.7 mmDuinoClone, the printed circuit board in 3D

    DuinoClone

    ARHollisSr/DuinoClone

    Arduino Clone with extended EEPROM

    20 parts1MIT
  • 4 layers49 × 27.9 mmMCU Datalogger, the printed circuit board in 3D

    MCU Datalogger

    elCowboyLuigi/MCU_datalogger_project_study

    This is a PCB project of a MCU Datalogger with EEPROM and Clock from section 11 of PCB Design with Kicad course for use as a learning experience

    31 parts1
  • 4 layers50 × 30 mmDatalogger v1, the printed circuit board in 3D

    Datalogger v1

    GildardoRestrepo/course_electronics_design

    Repositorio de actividades entregables del curso de diseño electrónico. UPB 2026-02

    35 parts1MIT
  • 2 layers52.2 × 34.4 mmMCU DataLoggerPCB, the printed circuit board in 3D

    MCU DataLoggerPCB

    lologog/MCU_DataLogger

    A microcontroller-based device for logging and storing data from external sensors. The data is saved to EEPROM memory for later retrieval and analysis

    30 parts1MIT

Questions

How big is the Graduation Project PCB?

It measures 40.1 × 32 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Graduation Project use?

27 parts, built around the 24LC1025-I/P and DS1337S+T&R. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Graduation Project KiCad files?

From the OmarAtef2003/DataLogger-Board repository on GitHub, at the commit this page was made from: the board is Graduation Project.kicad_pcb and its schematic Connectors.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Graduation Project design in my own project?

Its repository states no licence, so its author keeps all rights: ask OmarAtef2003 before reusing the design.