Skip to the content
2 layers231.1 × 153.3 mmFlight controller PCB, the printed circuit board in 3D

Design of a flight controllern using KiCad Ver 9.0

Size
231.1 × 153.3 mm
Copper layers
2
Thickness
1.6 mm
Parts
25
Nets
136
Pads
219
Tracks, vias
602, 52
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
24 Sep 2026
Updated
24 Sep 2026

Overview

Flight controller PCB is an open-source printed circuit board by Numamadiwale, from the Numamadiwale/Design-of-Flight-Controller repository on GitHub. It is a 2-layer board of 231.1 × 153.3 mm with 25 parts on 136 nets, routed with 602 tracks and 52 vias.

It is built around the BMI088 and RASPBERRY PI 5 2GB. Its parts include 12 capacitors, 7 connectors, 4 ICs, 1 resistor and 1 diode. It belongs with the robots and motor control boards and the STM32 boards of this library.

Main components

2

README

README.md

Design-of-Flight-Controller

Design of a flight controllern using KiCad Ver 9.0 the Design was made using the below list of components for a Drone : Screenshot 2026-09-25 011520

3D view of the final design :

Screenshot 2026-09-25 011732

still optimization is needed for minimization of the board size, No DRC errors recorded. Caution is to be exercised and further validation required.

Parts

25
QtyValueFootprintReferences
7100 nano F capCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC5, C6, C7, C8, C9, C11, C12
222 Micro FCapacitor_SMD:CP_Elec_3x5.3C3, C4
110 micro FCapacitor_SMD:CP_Elec_3x5.3C1
110 micro F capCapacitor_SMD:CP_Elec_3x5.3C2
110k ohm Resistor for STMResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR1
1470 micro F capCapacitor_THT:CP_Radial_D10.0mm_P5.00mmC10
1BECConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ5
1BEC_OUTConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ6
1BMI088Package_LGA:Bosch_LGA-16_4.5x3mm_P0.5mm_LayoutBorder7x1y_ClockwisePinNumberingU1
1BMP 581Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_VerticalJ1
1D_TVSDiode_SMD:D_SMA_HandsolderingD1
1IIS2MDCTRPackage_LGA:Kionix_LGA-12_2x2mm_P0.5mm_LayoutBorder2x4yJ2
1Main Power SupplyConnector_AMASS:AMASS_XT60-M_1x02_P7.20mm_VerticalJ4
1Raspberry_Pi_5Connector_PinHeader_2.54mm:PinHeader_2x20_P2.54mm_VerticalJ3
1STM32H743VITxPackage_QFP:LQFP-100_14x14mm_P0.5mmU2
1Voltage RegulatorPackage_TO_SOT_SMD:SOT-223-3_TabPin2U4
1Voltage Regulator for 9v CameraPackage_TO_SOT_THT:TO-220-3_VerticalU3
1XT60 Connector for 9V batteryConnector_AMASS:AMASS_XT60-M_1x02_P7.20mm_VerticalJ7

Similar boards

  • 2 layers34.5 × 82 mmKin3ct, the printed circuit board in 3D

    Kin3ct

    KavEn06/Kin3ct

    3D Scanner

    5 parts8
  • 2 layers151.3 × 122.6 mmRemote v2, the printed circuit board in 3D

    Remote v2

    KIIT-Robotic-Society/Dharma_RoboFest4.0

    Dharma Bot is a quadruped robotic dog featuring 12-DOF locomotion, real-time sensing, and a modular subsystem design.

    135 parts4MIT
  • 2 layers56.4 × 146.6 mmRadio, the printed circuit board in 3D

    Radio

    adamzoiss/senior-design-312

    FAMU-FSU COE ECE Senior Design Project - Team 312

    9 parts3Apache-2.0
  • 2 layers237 × 139.1 mmMothbox 5.0.6, the printed circuit board in 3D

    Mothbox 5.0.6

    Digital-Naturalism-Laboratories/Mothbox_Electronics

    This is where the electronics for the Mothbox are developed, such as the PCB! It's copied over from https://github.com/Digital-Naturalism-Laboratories/Mothbox/tree/main/Hardware/PCB so you can check that out if you want…

    185 parts3MIT
  • 2 layers91.5 × 116 mmPCITransmissor, the printed circuit board in 3D

    PCITransmissor

    Faraoh-Back/FSAE-UNICAMP

    Este repositório centraliza todos os códigos e desenvolvimentos de software da equipe Fórmula SAE. Aqui você encontrará os firmwares, algoritmos e ferramentas utilizados em nosso protótipo.

    19 parts
  • 4 layers69 × 72.4 mmSimple Sprouts PCB, the printed circuit board in 3D

    Simple Sprouts PCB

    j-solis11/Simple-Sprouts

    Simple Sprouts is an autonomous vertical farming system designed for compact urban environments like university campuses and restaurants.

    43 parts
  • 4 layers115.4 × 76.8 mmRailshield Project, the printed circuit board in 3D

    Railshield Project

    Mohanalakshmi06/KiCAD_Railshield

    This file contains all the details of the Schematic view of our Project.

    51 parts

Questions

How big is the Flight controller PCB PCB?

It measures 231.1 × 153.3 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Flight controller PCB use?

25 parts, built around the BMI088 and RASPBERRY PI 5 2GB. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Flight controller PCB KiCad files?

From the Numamadiwale/Design-of-Flight-Controller repository on GitHub, at the commit this page was made from: the board is Flight_controller_PCB.kicad_pcb and its schematic Flight_controller_PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Flight controller PCB design in my own project?

Its repository states no licence, so its author keeps all rights: ask Numamadiwale before reusing the design.