

Railshield Project
This file contains all the details of the Schematic view of our Project.
- Size
- 115.4 × 76.8 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 51
- Nets
- 95
- Pads
- 354
- Tracks, vias
- 666, 106
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 24 Oct 2026
- Updated
- 24 Oct 2026
Overview
Railshield Project is an open-source printed circuit board by Mohanalakshmi06, from the Mohanalakshmi06/KiCAD_Railshield repository on GitHub. It is a 4-layer board of 115.4 × 76.8 mm with 51 parts on 95 nets, routed with 666 tracks and 106 vias.
It is built around the ADS1115IDGS, MQ-2 and MICS-5524, with the RFM95W and RASPBERRY PI 5 2GB among its other parts. Its parts include 17 capacitors, 13 resistors, 11 ICs, 5 connectors and 1 inductor.
Main components
5ADS1115IDGS
MSOP10Ultra-Small, Low-Power, 4 Channels 16-Bit Analog-to-Digital Converter with Internal ReferenceTexas InstrumentsUncategorisedMQ-2
插件多气体检测能力 插件 Gas Sensors ROHSZhengzhou Winsen Elec TechGas SensorsMICS-5524
SMD-10P,7x5mm-30℃~+85℃ 1.55mm 1ppm~1000ppm 32mA 4.9V~5.1V 5mm 7mm Carbon Monoxide、Hydrogen sulfide 多气体检测能力 SMD-10P,7x5mm Gas Sensors ROHSAmphenolGas SensorsRFM95W
SMD-16PUncategorisedHopeRF Micro-electronicsRASPBERRY PI 5 2GB
-- Raspberry Pi ROHSRaspberry PiRaspberry Pi
README
README.mdKiCAD_Railshield
This file contains all the details of the Schematic view of our Project.
Parts
51| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 10k | Resistor_SMD:R_0603_1608Metric | R1, R2, R4, R5, R6, R8, R9, R10, R11, R12, R14 |
| 6 | 100nf | Capacitor_SMD:C_0201_0603Metric | C9, C10, C11, C13, C14, C17 |
| 4 | Motor_Servo | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Horizontal | M1, M2, M3, M4 |
| 3 | 1uf | Capacitor_SMD:C_0402_1005Metric | C4, C5, C16 |
| 2 | 0.5pf | Capacitor_SMD:C_0201_0603Metric | C6, C7 |
| 2 | 1uf | Capacitor_SMD:C_0603_1608Metric | C2, C12 |
| 2 | ADS1115IDGS | Package_SO:TSSOP-10_3x3mm_P0.5mm | U4, U11 |
| 1 | 0.1uf | Capacitor_SMD:C_0201_0603Metric | C8 |
| 1 | 0.1uf | Capacitor_SMD:C_0402_1005Metric | C3 |
| 1 | 100 | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | 10uf | Capacitor_SMD:C_0603_1608Metric | C15 |
| 1 | 10uf | Capacitor_SMD:C_0402_1005Metric | C1 |
| 1 | Conn_01x04 | Connector:FanPinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | Conn_Coaxial_x2 | Connector_Coaxial:LEMO-EPG.00.302.NLN | J3 |
| 1 | L | Inductor_SMD:L_0402_1005Metric | L1 |
| 1 | MQ-135 | Sensor_Audio:InvenSense_ICS-43434-6_3.5x2.65mm | U5 |
| 1 | MQ-138 | Sensor_Audio:ST_HLGA-6_3.76x4.72mm_P1.65mm | U2 |
| 1 | MQ-2 | Sensor:MQ-6 | U3 |
| 1 | MQ-3 | Sensor:MQ-6 | U1 |
| 1 | MiCS-5524 | Sensor:Sensortech_MiCS_5x7mm_P1.25mm | U7 |
| 1 | PID_AH2 | Sensor:Senseair_S8_Up | U8 |
| 1 | R | Resistor_SMD:R_0402_1005Metric | R13 |
| 1 | RFM95W | RF_Module:CMWX1ZZABZ | U6 |
| 1 | RGB Camera Connector | Connector_PinHeader_1.00mm:PinHeader_1x15_P1.00mm_Vertical_SMD_Pin1Right | J4 |
| 1 | Raspberry_Pi_5 | Module:RaspberryPi_Pico_SMD | J5 |
| 1 | TGS 2602 | Sensor:Winson_GM-402B_5x5mm_P1.27mm | U10 |
| 1 | TGS 2620 | Sensor:MQ-6 | U9 |
| 1 | Thermal Camera Conn | Connector:FanPinHeader_1x04_P2.54mm_Vertical | J1 |
Similar boards
- 2 layers68.6 × 53.3 mm

- 2 layers11.4 × 18.4 mm

Mems blade
JamesTwallin/gas_sensor
A tiny plug-in board for the rev E phone-companion board. It stands upright in a notch in rev E's sensor end, between the two gas sensor cans, and pokes 4.5 mm out through a slot in the case face, so its tip sits in the…
11 parts7MIT - 2 layers12.7 × 19 mm

Adafruit adafruit mics 5524 gas sensor breakout pcb adafruit mics 5524
oomlout/oomlout_oomp_project_bot_v_2
12 parts - 2 layers98 × 83.8 mm

Projeto placa
phfbertoleti/placa_lorawan
Repositório oficial da placa LoRaWAN, um kit de desenvolvimento para protótipos IoT.
39 parts19MIT - 2 layers34.5 × 82 mm

- 2 layers151.3 × 122.6 mm

Remote v2
KIIT-Robotic-Society/Dharma_RoboFest4.0
Dharma Bot is a quadruped robotic dog featuring 12-DOF locomotion, real-time sensing, and a modular subsystem design.
135 parts4MIT - 2 layers56.4 × 146.6 mm

- 2 layers237 × 139.1 mm

Mothbox 5.0.6
Digital-Naturalism-Laboratories/Mothbox_Electronics
This is where the electronics for the Mothbox are developed, such as the PCB! It's copied over from https://github.com/Digital-Naturalism-Laboratories/Mothbox/tree/main/Hardware/PCB so you can check that out if you want…
185 parts3MIT
Questions
How big is the Railshield Project PCB?
It measures 115.4 × 76.8 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Railshield Project use?
51 parts, built around the ADS1115IDGS, MQ-2, MICS-5524 and RFM95W. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Railshield Project KiCad files?
From the Mohanalakshmi06/KiCAD_Railshield repository on GitHub, at the commit this page was made from: the board is Railshield_Project.kicad_pcb and its schematic Railshield_Project.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Railshield Project design in my own project?
Its repository states no licence, so its author keeps all rights: ask Mohanalakshmi06 before reusing the design.