
Railshield Project
Mohanalakshmi06/KiCAD_Railshield
This file contains all the details of the Schematic view of our Project.

Ch4 sensor is an open-source printed circuit board by Davey5506, from the Davey5506/MEMs-Gas-Sensor repository on GitHub. It is a 2-layer board of 68.6 × 53.3 mm with 29 parts on 46 nets, routed with 73 tracks and 2 vias.
It is built around the LM358 and MICS-5524. Its parts include 9 resistors, 5 capacitors, 4 connectors, 3 ICs and 2 diodes. It belongs with the sensors and measurement boards and the ESP8266 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole_3.2mm | Arduino_MountingHole:MountingHole_3.2mm | MH1, MH2, MH3, MH4 |
| 3 | 100nF | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C1, C2, C5 |
| 3 | 150 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R7, R8, R9 |
| 2 | 100uF | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C3, C4 |
| 2 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R3 |
| 2 | 2k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2, R4 |
| 1 | 20k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R5 |
| 1 | 82 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R6 |
| 1 | Analog | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J2 |
| 1 | Buzzer | Buzzer_Beeper:Buzzer_12x9.5RM7.6 | BZ1 |
| 1 | Digital/PWM | Connector_PinSocket_2.54mm:PinSocket_1x10_P2.54mm_Vertical | J3 |
| 1 | Digital/PWM | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J4 |
| 1 | ESP8266-01_ESP-01 | footprints:XCVR_ESP8266-01_ESP-01 | U1 |
| 1 | Green | PCM_SparkFun-LED:LED_5mm_PTH_Red_NoSilk | D2 |
| 1 | LM358 | Package_DIP:DIP-8_W7.62mm_Socket | U3 |
| 1 | LOGO | LOGO | G*** |
| 1 | MiCS-5524 | Sensor:Sensortech_MiCS_5x7mm_P1.25mm | U2 |
| 1 | Power | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J1 |
| 1 | Red | PCM_SparkFun-LED:LED_5mm_PTH_Red_NoSilk | D1 |

Mohanalakshmi06/KiCAD_Railshield
This file contains all the details of the Schematic view of our Project.

JamesTwallin/gas_sensor
A tiny plug-in board for the rev E phone-companion board. It stands upright in a notch in rev E's sensor end, between the two gas sensor cans, and pokes 4.5 mm out through a slot in the case face, so its tip sits in the…

oomlout/oomlout_oomp_project_bot_v_2

peterheinrich/InternetOverSpaghetti
Transmitting IP packages over a pair of spaghetti thus demonstrating how media independent IP really is.

zmaker/arduino_cookbook
gli sketch del nuovo progetto Arduino Cookbook e dei video di YouTube

profdc9/RFBitBanger
A QRP digital transceiver created from readily available parts for off-the-grid maintenance


tvlad1234/pillScopePlus
Oscilloscope based around the STM32F401 Black Pill and a color LCD screen
It measures 68.6 × 53.3 mm and has 2 copper layers, 1.6 mm thick.
29 parts, built around the LM358 and MICS-5524. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Davey5506/MEMs-Gas-Sensor repository on GitHub, at the commit this page was made from: the board is ch4_sensor.kicad_pcb and its schematic ch4_sensor.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Davey5506 before reusing the design.