
Main panel
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

A macropad
Ninjapad V2 is an open-source printed circuit board by Ninjadude01, from the Ninjadude01/Ninjapad-V2 repository on GitHub. It is a 2-layer board of 63 × 64.1 mm with 25 parts on 28 nets, routed with 187 tracks and 11 vias.
It is built around the SK6812MINI-E. Its parts include 7 switches, 6 diodes, 6 inductors, 2 ICs and 1 resistor. It belongs with the keyboards and input boards of this library.
The Ninjapad-V2 is a wireless macropad with 6 switches, a customizable knob, and a 0.91" oled display! It is fully hot-swappable, uses a 3.7V 600mAh rechargable lithium battery, and has mini-leds. By using ZMK firmware, it can wirelessly connect to your device and function as usual.
This is my second time creating a macropad; my first design was very basic and bland. I wanted to create something that was more advanced, had more features, and looked cooler, which is why I decided to have another go though NinjapadV2.


I decided to go with a 6-key layout as I do not need too many macros. It's a good mix between looking clean, while providing functionality.

The schematic and PCB for NinjapadV2 was designed in kicad, and a modified 3x3 matrix is used. Note: The wiring for the lithium battery was not included in the schematic. The positive side of the battery is wired to the bat+ pad on the bottom of the xiao, and the negative side is wired to bat-.

The xiao is located on the top right corner for easy access when you need to plug it in. The silkscreen includes the name "NinjaboardV2" written diagonally, the Hackclub/Nasa logo, and a Hackclub Milkyway star sticker.

| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | D | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2, D3, D4, D5, D6 |
| 6 | SK6812MINI-E | LED footprint:MX_SK6812MINI-E_REV | L1, L2, L3, L4, L5, L6 |
| 6 | SW_Push_45deg | Switch_Keyboard_Hotswap_Kailh:SW_Hotswap_Kailh_MX_Plated_1.00u | SW1, SW2, SW3, SW4, SW5, SW6 |
| 3 | LOGO | LOGO | G***, G***, G*** |
| 1 | 0.91" | Display:ER_OLEDM0.91_1x-I2C | U1 |
| 1 | 330 R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | RotaryEncoder_Switch | Rotary_Encoder:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW7 |
| 1 | ~ | Seeed_Studio_XIAO_Series:XIAO-nRF52840-DIP | IC1 |

google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

Bastardkb/Dilemma
The Dilemma is a vertical stagger low-profile keyboard with mods.

Pwnsat/FlatSat
Flatsat v1.0 is a hardware based platform for aerospace cybersecurity research

adamws/kicad-kbplacer
KiCad plugin for automatic keyboard's key placement and routing

imchipwood/dumbpad
Simple 4x4 numpad with rotary encoder. Powered by QMK via ATmega32u4 Pro Micro

makerforgetech/modular-biped
An open source framework for creating a bipedal modular companion robot.


It measures 63 × 64.1 mm and has 2 copper layers, 1.6 mm thick.
25 parts, built around the SK6812MINI-E. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Ninjadude01/Ninjapad-V2 repository on GitHub, at the commit this page was made from: the board is PCB/NinjapadV2.kicad_pcb and its schematic PCB/NinjapadV2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Ninjadude01 before reusing the design.