2 layers65 × 56.5 mm
SuperPower RPi KiCAD
SensorsIot/SuperPower
Here you should find the best power supplies for your low-power projects
122 parts600
2 layers30 × 30 mm
Measure
NikhilMotagi/FancyDMMATTiny 85 based Current & Voltage measurement tool
- Size
- 30 × 30 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 15
- Nets
- 13
- Pads
- 54
- Tracks, vias
- 111, 9
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 2 Jun 2023
- Updated
- 27 Nov 2024
Overview
Measure is an open-source printed circuit board by NikhilMotagi, from the NikhilMotagi/FancyDMM repository on GitHub. It is a 2-layer board of 30 × 30 mm with 15 parts on 13 nets, routed with 111 tracks and 9 vias.
It is built around the ATTINY85-20SU and AMS1117-3.3. Its parts include 4 ICs, 3 resistors, 2 connectors, 1 capacitor and 1 switch. It belongs with the sensors and measurement boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
2
ATTINY85-20SU
SOIC-8-208mil-40℃~+85℃ 10bit 2.7V~5.5V 20MHz 512Byte 512Byte 6 8 Bit 8KB AVR Built-in FLASH SOIC-8-208mil Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
README.mdFancyDMM
Inspired by the Atmega328P-based voltage and current measuring device utilizing the INA266 current sensor, I aim to create a more compact and cost-effective version using the versatile ATTiny microcontroller. This project will involve designing a circuit to measure both voltage and current, processing the data using the ATTiny, and displaying the results on an appropriate display. To keep the code size low, I used Bare Metal coding.
Photo Gallery
 |  |
|---|---|
 |  |
Project Inspired from
link : https://hackaday.io/project/191203-mini-oled-panel-meter
Parts
15| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | LOGO | sche:tinyZINGER | G***, G*** |
| 2 | R | Resistor_SMD:R_0603_1608Metric | R4, R5 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | ATtiny85-20S | Package_SO:SOIC-8W_5.3x5.3mm_P1.27mm | U1 |
| 1 | Battery_conn | Connector_JST:JST_GH_SM02B-GHS-TB_1x02-1MP_P1.25mm_Horizontal | J2 |
| 1 | C | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | IN | TestPoint:TestPoint_Pad_4.0x4.0mm | TP1 |
| 1 | INA226 | Package_SO:VSSOP-10_3x3mm_P0.5mm | U2 |
| 1 | Makeshift_SPI_header | Connector:Tag-Connect_TC2030-IDC-NL_2x03_P1.27mm_Vertical | J1 |
| 1 | OUT | TestPoint:TestPoint_Pad_4.0x4.0mm | TP2 |
| 1 | R | Resistor_SMD:R_2512_6332Metric | R1 |
| 1 | SSD1306_OLEDModule | sche:SSD1306_OLEDModule | U4 |
| 1 | SW_SPST | Button_Switch_SMD:SW_SPDT_CK-JS102011SAQN | SW1 |
Similar boards
- 2 layers18.8 × 8.1 mm
Dell charger emulator
KivApple/dell-charger-emulator
Emulator of original Dell charger using ATTINY85
6 parts154 - 2 layers14 × 17.3 mm
- 2 layers43.9 × 29 mm
C64Saver2-addon
bwack/C64-Saver-bwack
C64 Saver v1 and v2 - Overvoltage protection for the C64 and its power brick.
43 parts124 - 2 layers61 × 36.8 mm
- 2 layers200 × 100 mm
Regalodilara
valerionew/very-good-uc-doggos
A special graduation present for a special friend. Six microcontrollers in one devboard
91 parts50 - 2 layers134.3 × 140 mm
- 2 layers50 × 25 mm
LoRa Environmental Sensors
spielhuus/LoRa-Environmental-Sensors
ATtiny85 based LoRa atmospheric sensor board with BME280
5 parts28
Questions
How big is the Measure PCB?
It measures 30 × 30 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Measure use?
15 parts, built around the ATTINY85-20SU and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Measure KiCad files?
From the NikhilMotagi/FancyDMM repository on GitHub, at the commit this page was made from: the board is measure.kicad_pcb and its schematic measure.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Measure design in my own project?
Its repository states no licence, so its author keeps all rights: ask NikhilMotagi before reusing the design.