4 layers96.5 × 85.5 mm
2 layers87 × 67.5 mm
ResoDriver
NickNiski/ResoDriverA control board for a mini resonant IGBT inverter
- Size
- 87 × 67.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 102
- Nets
- 110
- Pads
- 445
- Tracks, vias
- 593, 436
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 21 Jun 2025
- Updated
- 21 Jun 2025
Overview
ResoDriver is an open-source printed circuit board by NickNiski, from the NickNiski/ResoDriver repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 87 × 67.5 mm with 102 parts on 110 nets, routed with 593 tracks and 436 vias.
It is built around the ADS1115IDGS, AP62300TWU and 74LVC1G04Z, with the SI5351A-B-GT, TLV76050DBZ and NRS4018T100MDGJ among its other parts. Its parts include 28 capacitors, 22 resistors, 13 ICs, 11 connectors and 3 diodes. It belongs with the STM32 boards of this library.
Main components
8
ADS1115IDGS
MSOP10Ultra-Small, Low-Power, 4 Channels 16-Bit Analog-to-Digital Converter with Internal ReferenceTexas InstrumentsUncategorised
AP62300TWU
TSOT-26-40℃~+125℃ 1 155uA 3A 4.2V~18V 750kHz 763mV~7V Adjustable Buck Buck Built-in Yes TSOT-26 DC-DC Converters ROHSDiodes IncorporatedDC-DC Converters
74LVC1G04Z
SOT-553-40℃~+125℃ 1 1 1.65V~5.5V 1.7V~2V 200uA 32mA 32mA 5ns@5V,50pF 700mV~800mV 74LVC SOT-553 Inverters ROHSDiodes IncorporatedInvertersSI5351A-B-GT
MSOP-10-40℃~+85℃ 1.71V~3.6V 200MHz 3 I2C MSOP-10 Clock Generators, PLLs, Frequency Synthesizers ROHSSilicon LabsClock Generators, PLLs, Frequency Synthesizers
TLV76050DBZ
SOT-23-40℃~+125℃@(Tj) 1 1.2V@(100mA) 100mA 30V 5V 5mA Fixed Over Current Protection、Over Temperature Protection Positive SOT-23 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
NRS4018T100MDGJ
SMD,4x4mm1.2A 1.3A 10uH 150mΩ ±20% SMD,4x4mm Power Inductors ROHSTaiyo YudenPower Inductors
VLS6045EX-3R3N
SMD,6x6mm23mΩ 3.3uH 4.95A 6.5A ±30% SMD,6x6mm Power Inductors ROHSTDKPower Inductors
RJHSE-5381
插件-55℃~+85℃ 1 Gold Phosphor bronze RJ45 Jack Right Angle Shielded With LED 插件 Ethernet Connectors / Modular Connectors (RJ45 RJ11) ROHSAmphenolEthernet Connectors / Modular Connectors (RJ45 RJ11)
README
README.mdResoDriver
A control board for a mini resonant IGBT inverter
Parts
102| Qty | Value | Footprint | References |
|---|---|---|---|
| 19 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C2, C3, C17, C18, C19, C24, C25, C26, C27, C28, C29, C31, C32, C33, C35, C36 +3 |
| 16 | TestPoint_Small | ResoDriver:TestPoint_Pad_D1.0mm_NOGARBAGE | TP14, TP17, TP18, TP19, TP20, TP21, TP22, TP23, TP24, TP25, TP26, TP27, TP28, TP29, TP30, TP31 |
| 13 | 10k | Resistor_SMD:R_0603_1608Metric | R2, R11, R15, R16, R28, R29, R30, R31, R32, R33, R34, R35, R36 |
| 5 | 180 | Resistor_SMD:R_0603_1608Metric | R13, R14, R25, R26, R27 |
| 3 | D_Small | Diode_SMD:D_SOD-123F | D1, D2, D3 |
| 2 | 10pF | Capacitor_SMD:C_0402_1005Metric | C15, C16 |
| 2 | 22uF | Capacitor_SMD:C_0805_2012Metric | C12, C13 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric | R3, R4 |
| 2 | ADS1115IDGS | Package_SO:TSSOP-10_3x3mm_P0.5mm | U6, U8 |
| 2 | Conn_01x04_MountingPin | Connector_Molex:Molex_PicoBlade_53261-0471_1x04-1MP_P1.25mm_Horizontal | J4, J8 |
| 2 | Interface | Connector_Molex:Molex_PicoBlade_53261-0971_1x09-1MP_P1.25mm_Horizontal | J6, J9 |
| 2 | SolderJumper_2_Bridged | Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP1, JP2 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric | C14 |
| 1 | 10uH | Inductor_SMD:L_Coilcraft_XAL4040-XXX | L1 |
| 1 | 120 | Resistor_SMD:R_0603_1608Metric | R12 |
| 1 | 12VIN | Connector_JST:JST_PH_S2B-PH-SM4-TB_1x02-1MP_P2.00mm_Horizontal | J13 |
| 1 | 1uF | Capacitor_SMD:C_0603_1608Metric | C6 |
| 1 | 2.2uF | Capacitor_SMD:C_0603_1608Metric | C7 |
| 1 | 220nF | Capacitor_SMD:C_0603_1608Metric | C11 |
| 1 | 25MHz | Oscillator:Oscillator_SMD_ECS_2520MV-xxx-xx-4Pin_2.5x2.0mm | X1 |
| 1 | 3.3uH | Inductor_SMD:L_TDK_VLS6045EX_VLS6045AF | L2 |
| 1 | 33.2k | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 4.7uF | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | 4040 | Package_SO:TSSOP-16_4.4x5mm_P0.65mm | U14 |
| 1 | 40MHz | Crystal:Crystal_SMD_2016-4Pin_2.0x1.6mm | Y1 |
| 1 | 74LVC1G04 | ResoDriver:Texas_X2SON6_1x1mm_P0.35mm | U13 |
| 1 | 8P8C_LED_Shielded | Connector_RJ:RJ45_Amphenol_RJHSE538X | J5 |
| 1 | AP62300TWU | Package_TO_SOT_SMD:TSOT-23-6 | U7 |
| 1 | Conn_01x02_MountingPin | Connector_Molex:Molex_PicoBlade_53261-0271_1x02-1MP_P1.25mm_Horizontal | J10 |
| 1 | Conn_ARM_SWD_TagConnect_TC2030-NL | Connector:Tag-Connect_TC2030-IDC-NL_2x03_P1.27mm_Vertical | J2 |
| 1 | MCP2518FD-xQBB | Package_DFN_QFN:DFN-14-1EP_3x4.5mm_P0.65mm_EP1.65x4.25mm | U9 |
| 1 | MCP2542WFDxMF | Package_DFN_QFN:DFN-8-1EP_3x3mm_P0.65mm_EP1.55x2.4mm | U10 |
| 1 | STM32F411C_C-E_Ux | Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.6x5.6mm | U1 |
| 1 | SW_Nidec_CAS-120A1 | Button_Switch_SMD:Nidec_Copal_CAS-120A | SW2 |
| 1 | SW_Push | Button_Switch_SMD:SW_SPST_FSMSM | SW3 |
| 1 | Si5351A-B-GT | Package_SO:MSOP-10_3x3mm_P0.5mm | U12 |
| 1 | SolderJumper_3_Bridged12 | Jumper:SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm | JP11 |
| 1 | Therm | Connector_Molex:Molex_PicoBlade_53261-0971_1x09-1MP_P1.25mm_Horizontal | J7 |
| 1 | USB_C_Receptacle_USB2.0_14P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
| 1 | ~ | Package_TO_SOT_SMD:SOT-23-3 | U4 |
| 1 | ~ | ResoDriver:ILI9341 | U3 |
| 1 | ~ | ResoDriver:PinSwapper_2_Mini | J3 |
| 1 | ~ | Package_BGA:Texas_DSBGA-6_0.855x1.255mm_Layout2x3_P0.4mm_LevelC | U2 |
| 1 | ~ | ResoDriver:WLCSP-5 | U5 |
Similar boards
- 2 layers300 × 48 mm
MetodAdapter12V
Jochen0x90h/LedStrip
Receiver and voltage regulator for LED strips based on WS2812 or equivalent
22 partsMIT - 4 layers114.3 × 108 mm
Pellet
Mouse-GYM/auto-trainer-hardware
Repository for hardware, firmware, and software related to the Mouse-GYM modules
202 parts - 2 layers97.4 × 72.1 mm
T25 445PCB
RitvikPatnala/auto-guitar-tuner
Handheld auto guitar tuner: custom ESP32-S3 PCB with autocorrelation pitch detection and servo-driven peg tuning
74 partsMIT - 4 layers99.5 × 69 mm
Pump controller reva
UWARG/pump-controller-hardware
Hardware for Competition 2026 Water Pump Controller on Project Valkyrie
244 parts - 6 layers167.5 × 79 mm
- 2 layers100 × 103.5 mm
- 2 layers63 × 99 mm
BionxBatteryBoard
William-Yen/Bionx-3rdParty-BMS
A supplemental PCB to retrofit a Bionx e-bike battery pack with a 3rd-party BMS
144 partsGPL-3.0
Questions
How big is the ResoDriver PCB?
It measures 87 × 67.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ResoDriver use?
102 parts, built around the ADS1115IDGS, AP62300TWU, 74LVC1G04Z and SI5351A-B-GT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ResoDriver KiCad files?
From the NickNiski/ResoDriver repository on GitHub, at the commit this page was made from: the board is Hardware/ResoDriver.kicad_pcb and its schematic Hardware/ResoDriver.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ResoDriver design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).