Skip to the content
123

TLV76050DBZ

Texas InstrumentsExtended

-40℃~+125℃@(Tj) 1 1.2V@(100mA) 100mA 30V 5V 5mA Fixed Over Current Protection、Over Temperature Protection Positive SOT-23 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS

Part id
ti/TLV76050DBZ
Category
Voltage Regulators, Linear, Low Drop Out (LDO) Regulators
Package
SOT-23
Pins
3
In stock
591 at JLCPCB (C2867465)
Used on
2 open-source boards

Overview

The TLV76050DBZ is a voltage Regulators, Linear, Low Drop Out (LDO) Regulator made by Texas Instruments in a SOT-23 package with 3 pins. -40℃~+125℃@(Tj) 1 1.2V@(100mA) 100mA 30V 5V 5mA Fixed Over Current Protection、Over Temperature Protection Positive SOT-23 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.

PCBKit's library has its KiCad symbol (Pinmap_Generic:Regulator_Linear_1OUT_2IN_3GND, from PCBKit's generic symbols) and its footprint (Package_TO_SOT_SMD:SOT-23, from KiCad's library), ready for a KiCad board. 591 are in stock at JLCPCB (part C2867465). 2 open-source boards in 2 repositories on GitHub use it.

Symbol

2IN1OUT3GND
Pinmap_Generic:Regulator_Linear_1OUT_2IN_3GNDFrom PCBKit's generic symbols

Footprint

123
Package_TO_SOT_SMD:SOT-23From KiCad's library

From the datasheet

12
Supply, most
30 V · IN, recommended operating max · p. 4
Supply, absolute maximum
35 V · IN, absolute maximum · p. 4
Junction, hottest
150 °C · Junction temperature, absolute maximum · p. 4
Takes working
2 mA · Ground pin current, typical, no load, input from nominal output + 1.5 V to 30 V · p. 5
Gives
100 mA · Output current, recommended maximum · p. 4
Output
5 V · TLV76050, fixed nominal output · p. 12
Dropout
700 mV · Typical at 10 mA, 25°C · p. 5
Dropout
900 mV · Typical at 100 mA, 25°C · p. 5
Dropout
1.2 V · Max at 100 mA, −40°C to 125°C junction temperature · p. 5
Junction to air (DBZ (SOT-23))
275.2 K/W · Junction-to-ambient thermal resistance · p. 4
Junction to case (DBZ (SOT-23))
92.8 K/W · Junction-to-case top thermal resistance · p. 4
Junction to board (DBZ (SOT-23))
56.8 K/W · Junction-to-board thermal resistance · p. 4

What it is and has

4
Input voltage
Up to 30 V · p. 1
Output current
Up to 100 mA · p. 1
Protection
Active thermal protection and current limit · p. 1
Package
3-pin SOT-23, 2.92 mm × 1.30 mm · p. 1

Around it

1
cap 0.1 µF
between IN and GND; Minimum capacitance for stability and adequate transient performance; use C0G, X7R, or X5R ceramic. · p. 11

Specifications

24
ParameterConditionsAs printedPage
Input voltage (IN to GND)min -0.3 · max 35 V4
Junction temperaturemin -40 · max 150 °C4
Storage temperature Tstgmin -65 · max 150 °C4
Electrostatic discharge V(ESD)Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001 (1); rating ±2000 Vmax 2000 V4
Electrostatic discharge V(ESD)Charged-device model (CDM), per JEDEC specification JESD22-C101 (2); rating ±500 Vmax 500 V4
Maximum input voltage (IN to GND)max 30 V4
Output current IOUTmax 100 mA4
Input and output capacitor COUTmin 0.1 uF4
Junction temperature TJmin -40 · max 125 °C4
Junction-to-ambient thermal resistance RθJADBZ (SOT-23), 3 pinstyp 275.2 °C/W4
Junction-to-case (top) thermal resistance RθJC(top)DBZ (SOT-23), 3 pinstyp 92.8 °C/W4
Junction-to-board thermal resistance RθJBDBZ (SOT-23), 3 pinstyp 56.8 °C/W4
Junction-to-top characterization parameter ψJTDBZ (SOT-23), 3 pinstyp 2.9 °C/W4
Junction-to-board characterization parameter ψJBDBZ (SOT-23), 3 pinstyp 55.6 °C/W4
Output voltage accuracy VOUTTLV76050; VIN = VOUT(NOM) + 1.5 V; 1 mA ≤ IOUT ≤ 100 mA; TA = TJ = 25°C; limits printed as percentagesmin -4 · max 4 V5
Output voltage accuracy VOUTTLV76050; VIN = VOUT(NOM) + 1.5 V; 1 mA ≤ IOUT ≤ 100 mA; −40°C ≤ TJ ≤ 125°C; limits printed as percentagesmin -5 · max 5 V5
Line regulation ΔV(ΔVIN)VOUT(NOM) = 5 V; VOUT(NOM) + 1.5 V ≤ VIN ≤ 30 V; IOUT = 1 mA; −40°C ≤ TJ ≤ 125°Ctyp 10 · max 30 mV5
Load regulation ΔV(ΔIOUT)VOUT(NOM) = 5 V; VIN = VOUT(NOM) + 1.5 V; 10 mA ≤ IOUT ≤ 100 mA; −40°C ≤ TJ ≤ 125°Ctyp 20 · max 45 mV5
Ground pin current IGNDVOUT(NOM) + 1.5 V ≤ VIN ≤ 30 V; no load; −40°C ≤ TJ ≤ 125°Ctyp 2 · max 5 mA5
Dropout voltage VDOIOUT = 10 mA; TA = TJ = 25°Ctyp 0.7 · max 0.9 V5
Dropout voltage VDOIOUT = 10 mA; −40°C ≤ TJ ≤ 125°Cmax 1 V5
Dropout voltage VDOIOUT = 100 mA; TA = TJ = 25°Ctyp 0.9 · max 1.1 V5
Dropout voltage VDOIOUT = 100 mA; −40°C ≤ TJ ≤ 125°Cmax 1.2 V5
Thermal shutdown temperature TSDtyp 150 °C5

Pins, by the datasheet

3
1 OUT
Output voltage; requires a ceramic capacitor greater than or equal to 0.1 uF for stability. · p. 3
2 IN
Input voltage supply; TI recommends an input capacitor greater than 0.1 uF. · p. 3
3 GND
Common ground. · p. 3

Ordering codes, by the datasheet

4
TLV76050DBZR
SOT-23 (DBZ) · 5 V output; 3000 units, LARGE T&R · p. 17
TLV76050DBZR.B
SOT-23 (DBZ) · 5 V output; 3000 units, LARGE T&R; .B suffix · p. 17
TLV76050DBZT
SOT-23 (DBZ) · 5 V output; 250 units, SMALL T&R · p. 17
TLV76050DBZT.B
SOT-23 (DBZ) · 5 V output; 250 units, SMALL T&R; .B suffix · p. 17

Open-source boards using it

2
  • 2 layers300 × 48 mmMetodAdapter12V, the printed circuit board in 3D

    MetodAdapter12V

    Jochen0x90h/LedStrip

    Receiver and voltage regulator for LED strips based on WS2812 or equivalent

    22 partsMIT
  • 2 layers87 × 67.5 mmResoDriver, the printed circuit board in 3D

    ResoDriver

    NickNiski/ResoDriver

    A control board for a mini resonant IGBT inverter

    102 partsGPL-3.0

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the TLV76050DBZ?

Yes. The symbol is Pinmap_Generic:Regulator_Linear_1OUT_2IN_3GND and the footprint Package_TO_SOT_SMD:SOT-23, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the TLV76050DBZ?

SOT-23, with 3 pins. Its footprint is drawn on this page.

Where is the TLV76050DBZ datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the TLV76050DBZ?

JLCPCB lists it as part C2867465, with 591 in stock; the sellers' links on this page open their listings.

What can replace the TLV76050DBZ?

Parts like it in the library: the 78L05S by UMW, the 78L05 by ALJ, the 78L05S by Shikues and the HT7150S by UMW. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the TLV76050DBZ?

2 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.