Naivell453/Handheld-Console-StasisA handheld console that has it's own OS, Model and Games (Stasis 2026 Project)
PCB PCB Handheld PCB 2026-05-04 is an open-source printed circuit board by Naivell453, from the Naivell453/Handheld-Console-Stasis repository on GitHub. It is a 2-layer board of 200 × 90 mm with 19 parts on 72 nets.
It is built around the MT3608, AST-03008MR-R and PJ-3920-3A. Its parts include 5 ICs and 1 connector. It belongs with the audio and music boards of this library.
A handheld console that has it's own OS, Model and Games (Stasis 2026 Project)
Hardware
The console is built around the Orange Pi Zero 2W (Allwinner H618, quad-core Cortex-A53, 1.5GB RAM). It features a 3.5" ILI9488 SPI display, stereo audio through two MAX98357A I2S amplifiers driving 4Ω 3W speakers, a 5000mAh LiPo battery with USB-C charging, and an MPU-6050 gyroscope for motion controls. Input is handled by 8 tactile push buttons arranged in a GBA-style layout.
Firmware
Built with Buildroot targeting the Orange Pi Zero 3 defconfig, which is compatible with the Zero 2W as both use the Allwinner H618 SoC. To build: bashgit clone https://github.com/buildroot/buildroot cd buildroot make orangepi_zero3_defconfig make -j1 Flash output/images/sdcard.img to an SD card using Balena Etcher. The game launches automatically on boot with no password required.
Games
Ball Maze is a 2D physics-based maze game where the gyroscope controls the gravity direction. Rotating the console changes which way the ball falls, and the objective is to guide the ball out of the maze. Platformer is a 2D side-scrolling platformer controlled with the D-pad and buttons. FPS is a 3D first-person shooter with gyroscope-assisted aiming, currently in development.
PCB
Designed in EasyEDA and manufactured by JLCPCB. 2-layer through-hole design at 200mm × 90mm. The screen connects via SPI, the gyroscope via I2C, audio via I2S, and all buttons via GPIO pins on the Orange Pi header. Power is provided through an MT3608 boost converter stepping the battery voltage up to 5V.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 4PINTACTPCBTHTPUSHBUTTON | easyeda:SW-SMD_4P-L6.0-W6.0-P4.50-LS10.0_TL3301EF160QG | KEY1, KEY2, KEY3, KEY4, KEY5, KEY6, KEY7, KEY8 |
| 2 | AST-03008MR-R | easyeda:BEEP-TH_BD29.9-P15.00 | SPK1, SPK2 |
| 2 | MAX98357A | easyeda:MAX98357A | U3, U5 |
| 1 | 3.5inch ILI9488 Display | easyeda:3.5INCH ILI9488 | U2 |
| 1 | CONN_01x02 | easyeda:CONN_01X02_SMD | CONN1 |
| 1 | MPU6050 | easyeda:MPU6050 | P1 |
| 1 | MT3608 | easyeda:MT3608 | U4 |
| 1 | ORANGE-PI-ZERO-2W | easyeda:COMM-TH_40P-L65.0-W30.0-P2.54_ORANGE-PI-ZERO-2W | U1 |
| 1 | PJ-3920-3A | easyeda:AUDIO-TH_PJ-3920-3A | PJ1 |
| 1 | TP4056 CHARGING MODDULE | easyeda:TP4056-CHARGING-MODULE_TP4056 | AP1 |
LouDnl/USBSID-Pico
USBSID-Pico is a RPi Pico (RP2040/W RP2350/W) based board for interfacing one or two MOS SID chips and/or hardware SID emulators over (WEB)USB with your computer, phone, ASID supporting player or USB midi controller
cester-ino/OTTO-hardware
those specs refer to the tactile buttons version, but a led backlight button version is in the works too.
MR-DOS/TDR_diploma_thesis
Time domain reflectometer. Includes Hardware, firmware and GUI in Octave. Also a diploma thesis.
pcbcupid/Lora-Wireless-Sensor-Network
A wireless sensor network based on Lora and esp32C3. This repo will help you build a complete product from scratch to finish!
Pwnsat/PWNCUBE
PWNCUBE v1.0 is a Cubesat hardware based platform for aerospace cybersecurity research
ranzbak/qmtech_minimig
KiCad design for a minimig compatible board for the QM_XC7A100T_DDR3 board.
pacmancoder/easy-pdk-mini
Padauk MCU programmer variant for hand soldering.
It measures 200 × 90 mm and has 2 copper layers.
19 parts, built around the MT3608, AST-03008MR-R and PJ-3920-3A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Naivell453/Handheld-Console-Stasis repository on GitHub, at the commit this page was made from: the board is pcb/kicad/PCB_PCB_Handheld-PCB_2026-05-04.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Naivell453 before reusing the design.