

Current sensor final
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 18
- Nets
- 13
- Pads
- 44
- Tracks, vias
- 220, 6
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 23 Jul 2023
- Updated
- 23 Jul 2023
Overview
Current sensor final is an open-source printed circuit board by NEER4JKUM4R, from the NEER4JKUM4R/Current-Sensor-PCB repository on GitHub. It is a 2-layer board with 18 parts on 13 nets, routed with 220 tracks and 6 vias.
It is built around the MGJ2D151505SC, L7805CV and OP07CP. Its parts include 5 capacitors, 4 resistors, 3 ICs and 3 connectors. It belongs with the sensors and measurement boards of this library.
Main components
3MGJ2D151505SC
SIP,19.5x9.8mm-40℃~+105℃ -5V、15V 100mVp-p 12.5mm 13.5V~16.5V 19.5mm 2 20mA 220uF 300kHz 40mA、80mA 5.2kV 9.8mm 90% Short Circuit Protection SIP,19.5x9.8mm Isolated Power Modules ROHSEVISUNIsolated Power ModulesL7805CV
TO-2200℃~+125℃@(Tj) 1 1.5A 2V@(1A) 35V 5V 68dB@(120Hz) 8mA Fixed Over Current Protection、Over Temperature Protection、Short Circuit Protection Positive TO-220 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSSTMicroelectronicsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsOP07CP
PDIP-8-18V~-3V、3V~18V 0.3V/us 0℃~+70℃ 1 1.8nA 10.5nV/√Hz@10Hz 120dB 500nV/℃ 600kHz 60uV 800pA Built-in compensation PDIP-8 Precision Op Amps ROHSTexas InstrumentsPrecision Op Amps
Parts
18| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 1k | Resistor_SMD:R_0805_2012Metric | R1, R2, R3, R4 |
| 2 | 470 nf | Capacitor_SMD:C_0805_2012Metric | C4, C5 |
| 1 | .01 uf | Capacitor_SMD:C_0805_2012Metric | C2 |
| 1 | .33 uf | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | 100 nf | Capacitor_SMD:C_0805_2012Metric | C3 |
| 1 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | L7805CV | SamacSys_Parts:TO255P460X1020X2008-3P | IC1 |
| 1 | MGJ2D151505SC | SamacSys_Parts:MGJ2D151505SC | PS1 |
| 1 | MountingHole | MountingHole:MountingHole_2.7mm | H1 |
| 1 | MountingHole | MountingHole:MountingHole_4.3mm_M4 | H2 |
| 1 | OP07CP | SamacSys_Parts:DIP794W53P254L959H508Q8N | IC2 |
| 1 | input 2 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | output | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | ~ | VW Custom:current sensor footprint | U1 |
Similar boards
- 2 layers89.8 × 70.4 mm

- 2 layers116.5 × 152.5 mm

InstrumentV3
orpheus016/four-point-probe
Four point probe for semiconductor instrumentation system
71 partsMIT - 2 layers46.7 × 37.7 mm

- 2 layers52.1 × 116.8 mm

DIY Uncertainty
oamodular/uncertainty
This readme needs to be updated to reflect this and to talk about the many other languages that people have used to create new firmware for Uncertainty.
67 parts43 - 2 layers55 × 90.8 mm

- 2 layers100 × 80 mm

- 2 layers377.2 × 318 mm

Three phase bridge
arcoslab/open-coroco-legacy
COmpliant RObot COntroller is a free software project aiming to create an impedance controller based on a stm32 microcontroller using bldc motors and strain gauges.
105 parts6 - 2 layers127 × 91.5 mm

Accumulator Board
formulaslug/fs-3-schematics
Electrical Design Repository for fs-3 schematics and PCBs
110 parts5
Questions
What parts does the Current sensor final use?
18 parts, built around the MGJ2D151505SC, L7805CV and OP07CP. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Current sensor final KiCad files?
From the NEER4JKUM4R/Current-Sensor-PCB repository on GitHub, at the commit this page was made from: the board is Current Senssor Board/Current sensor final/Current sensor final.kicad_pcb and its schematic Current Senssor Board/Current sensor final/Current sensor final.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Current sensor final design in my own project?
Its repository states no licence, so its author keeps all rights: ask NEER4JKUM4R before reusing the design.