Skip to the content
2 layers116.5 × 152.5 mmInstrumentV3, the printed circuit board in 3D

Four point probe for semiconductor instrumentation system

Size
116.5 × 152.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
71
Nets
57
Pads
190
Tracks, vias
373, 19
Pours
1
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
15 Apr 2026
Updated
6 Jun 2026

Overview

InstrumentV3 is an open-source printed circuit board by orpheus016, from the orpheus016/four-point-probe repository on GitHub, published under the MIT licence. It is a 2-layer board of 116.5 × 152.5 mm with 71 parts on 57 nets, routed with 373 tracks and 19 vias.

It is built around the OP07CP, SRD-12VDC-SL-C and B2B-XH-A, with the TL431ACLP and B4B-ZR among its other parts. Its parts include 12 resistors, 12 connectors, 5 ICs, 4 switches and 2 capacitors.

Main components

5

README

README.md

four-point-probe

Four point probe for semiconductor instrumentation system

Software: voltage simulation pipeline

This repo includes a modular Python simulation for voltage acquisition with filters, live plotting, and CSV logging. It is designed to be swapped later with ADS1256 serial input from Arduino.

Development

If you plan to change code, start with:

  • CONTRIBUTING.md for the CI contract, local preflight, and PR checklist.
  • software/scripts/README.md for evaluate, integrate, and the compliance checker.
  • software/README.md for the software module overview and run examples.
  • CONTRIBUTING.md also explains how to write new tests under software/tests/ and run them from the repo root.

Setup

Install dependencies:

bash
pip install matplotlib

Optional (for future ADS1256 serial input):

bash
pip install pyserial

Run

From the repo root:

bash
python -m software.main

Example with custom settings:

bash
python -m software.main --sample-rate 100 --window-seconds 8 --noise 0.0005 --step

Offline data paths

There are two ways to work with recorded CSV data:

  1. Replay a CSV through the live runtime when you want the same pipeline as hardware, including the backbone, logger, and visualizer:
bash
python -m software.main --source csv --csv-path software/output/testbench/stable20mA.csv --backbone baseline
  1. Run offline evaluation when you want metrics and snapshot comparison without hardware commands or the live plot loop:
bash
python -m software.scripts.evaluate --input software/output/testbench/stable20mA.csv --backbones baseline --out software/output/evaluate/baseline-stable20mA

The offline evaluator writes a metrics CSV with the decided snapshot fields, marks that chosen snapshot with a star in the plot, and keeps the result separate from the live runtime output.

The default snapshot recording gate is configured in software/config/config.py, including the minimum recording duration used before a backbone may decide on a VI snapshot.

Serial protocol and CLI

Hardware integration uses a small text protocol implemented by the Arduino firmware and managed by software/command/serial_commander.py.

Framing markers (exact strings):

  • *STREAM_START — emitted by the Arduino to mark stream beginning
  • *STREAM_STOP — emitted by the Arduino to mark stream termination

Control commands sent from host to Arduino (single ASCII characters):

  • R — reset device
  • C — start streaming samples
  • s — stop streaming
  • iN — set current stage to N (e.g. i2)

The serial reader expects CSV-style measurement lines containing voltage,current_mA.

Common CLI execution examples:

  • Replay testbench CSVs and write evaluation results: python -m software.scripts.evaluate --input software/output/testbench --out results/

Single backbone on single dataset (example): python -m software.scripts.evaluate
--input software/output/testbench/stable20mA.csv
--backbones baseline
--out results/single_baseline_stable20mA

  • Run main with hardware ADS1256 on COM5: python -m software.main --source serial --port COM5 --baud 115200 --backbone baseline
  • Run headless evaluation from Python: python -c "from software.scripts.evaluate import main; main(['--input','software/output/testbench'])"

See software/config/config.py for all CLI defaults and flags (backbone selection, hysteresis thresholds, plot mode, etc.).

Parts

71
QtyValueFootprintReferences
121kResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR1, R2, R3, R4, R5, R6, R7, R8, R9, R10, R11, R12
6150Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderRS3, RS4, RS10, RS12, RS13, RS14
5OP07CPOP07CP:DIP794W45P254L959H508Q8U3, U4, U5, U6, U7
418886871888687:PHOENIX_1888687J8, J9, J13, J14
4SRD-12VDC-SL-CSRD-12VDC-SL-C:RELAY_SRD-12VDC-SL-CK1, K2, K3, K4
315Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderRS6, RS8, RS9
2100Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolderRS2, RS7
2100uCapacitor_THT:CP_Radial_D6.3mm_P2.50mmC1, C2
2220Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderRS1, RS5
23S4AE_0912S1UP3S4AE_0912S1UP:CONV_3S4AE_0912S1UPPS1, PS2
26130XX11821_613003118216130XX11821_61300311821:61300311821J1, J2
2B2B-XH-AB2B-XH-A:JST_B2B-XH-AJ3, J4
2CON-SMA-EDGE-SCON-SMA-EDGE-S:RFSOLUTIONS_CON-SMA-EDGE-SJ10, J11
2TL431ACLPTL431ACLP:VREG_TL431ACLPVR1, VR2
110Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderRS11
117301881730188:PHOENIX_1730188J12
12.43kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderRGain1
124Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderRS15
1B4B-ZRB4B-ZR:B4B-ZRCON1

The 55 most common of 71 parts.

Similar boards

  • 2 layers46.7 × 37.7 mmRat, the printed circuit board in 3D

    Rat

    Network-Direction/Audio-Effect-Pedals

    Guitar pedal schematics and resources

    37 parts
  • 4 layers120 × 50 mmUhmc, the printed circuit board in 3D

    Uhmc

    twuerfl/uhmc

    Underfloor Heating Manifold Controller

    110 parts1
  • 4 layersElec, the printed circuit board in 3D

    Elec

    elkel53930/twilight2

    A robosweep agent Twilight-2

    164 parts
  • 2 layers190 × 110 mmSaunaPCB, the printed circuit board in 3D

    SaunaPCB

    JuergenMH/SaunaControlUnit

    Control unit for sauna oven. Ensures comfort and safety.

    78 parts
  • 4 layers103.5 × 118 mmMEM RevA, the printed circuit board in 3D

    MEM RevA

    liamobbrien1/gbr-marlbot

    Open hardware, embedded software, and experimental infrastructure for the GBR MARLBOT multi-robot research platform.

    84 parts
  • 2 layers92 × 72.2 mmDevelopower v2.0, the printed circuit board in 3D

    Developower v2.0

    leoheck/developower-v2.0

    Developower-v2.0 Board

    50 parts8
  • 4 layers144.2 × 82.8 mmSmartFuseBox, the printed circuit board in 3D

    SmartFuseBox

    k3ldar/PowerControlHub

    PowerControlHub is a flexible automation controller for 12V systems. It combines relay switching, sensor monitoring, and smart‑home connectivity (MQTT, Home Assistant, REST, BLE) into one device.

    93 parts5GPL-3.0

Questions

How big is the InstrumentV3 PCB?

It measures 116.5 × 152.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the InstrumentV3 use?

71 parts, built around the OP07CP, SRD-12VDC-SL-C, B2B-XH-A and TL431ACLP. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the InstrumentV3 KiCad files?

From the orpheus016/four-point-probe repository on GitHub, at the commit this page was made from: the board is hardware/PCB/InstrumentV3/InstrumentV3.kicad_pcb and its schematic hardware/PCB/InstrumentV3/InstrumentV3.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the InstrumentV3 design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).