Skip to the content
4 layers39.8 × 72.5 mmNPulse v4, the printed circuit board in 3D

Microcontroller : A STM32G484 optimized for mixed-signal applications with a 16MHz external oscillator. Control the 8 DC motors independently. Power Management : +12V supply +5V supplied from the Power Board.

Size
39.8 × 72.5 mm
Copper layers
4
Thickness
1.6 mm
Parts
163
Nets
168
Pads
640
Tracks, vias
1,973, 328
Pours
12
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
29 Oct 2024
Updated
8 May 2025

Overview

NPulse v4 is an open-source printed circuit board by N-Pulse, from the N-Pulse/ARM-ELEC-CTRL repository on GitHub, published under the CC-BY-4.0 licence. It is a 4-layer board of 39.8 × 72.5 mm with 163 parts on 168 nets, routed with 1,973 tracks and 328 vias.

It is built around the TPS7A0533PDBZ and TXU0202QDCURQ1. Its parts include 70 capacitors, 36 resistors, 19 ICs, 16 inductors and 9 connectors. It belongs with the STM32 boards of this library.

Main components

2

README

NPulse_v4/README.md

N-Pulse - Control Board

Key Features

  • Microcontroller: A STM32G484 optimized for mixed-signal applications with a 16MHz external oscillator. Control the 8 DC motors independently.
  • Power Management: +12V supply +5V supplied from the Power Board. Use of a LDO to convert +5V to +3.3V ensuring a clean and independent +3.3V on the board.
  • 8 motor drivers: DRV8220 (TI) 2 Half-side bridges control with a 4-NOR-Gates SNLVC7402 with a PWM and a digital inputs
  • 6 10 positions connectors: link between the control board and the "connector board" on which all wires are solder (Power supply, FSR - Force sensor resistor, Motors + encoders)

Points that need to be reviewed

  1. Schematic - All the pins of the MCU : Check in the datasheet that all signals (PWM, Analogic (FSRs, LED, VBat, currents), encoders, oscillators, UARTs, SPI, reset, debug) are connected to the good MCU pins. So, the properties and the timers of each MCU must be checked.
  2. PCB - Footprint of each components (Daniel is working on that) : Check that all the selected footprints are the same as those described in datasheets.

Parts

163
QtyValueFootprintReferences
37100nFCapacitor_SMD:C_0402_1005MetricC2, C3, C12, C13, C16, C17, C18, C19, C20, C21, C22, C23, C24, C25, C27, C31 +21
2510uFCapacitor_SMD:C_0805_2012MetricC1, C26, C28, C29, C30, C33, C34, C38, C40, C41, C42, C45, C46, C50, C52, C53 +9
201kResistor_SMD:R_0402_1005MetricR1, R2, R3, R14, R15, R16, R17, R18, R19, R20, R21, R22, R25, R26, R29, R30 +4
1610uHInductor_SMD:L_1008_2520MetricL1, L2, L3, L4, L5, L6, L7, L8, L9, L10, L11, L12, L13, L14, L15, L16
81Resistor_SMD:R_0612_1632MetricR23, R24, R27, R28, R31, R32, R35, R36
8DRV8220DSGRDRV8220DSGR:WSON8_DSG_TEXIC2, IC3, IC4, IC5, IC6, IC7, IC8, IC9
8SN74LVC002Package_DFN_QFN:DHVQFN-14-1EP_2.5x3mm_P0.5mm_EP1x1.5mmU2, U3, U4, U5, U6, U7, U8, U9
6Conn_02x05_Odd_EvenConnector_PinHeader_2.00mm:PinHeader_2x05_P2.00mm_Vertical_SMDJ5, J6, J7, J8, J9, J10
51uFCapacitor_SMD:C_0402_1005MetricC9, C10, C11, C55, C56
410kResistor_SMD:R_0402_1005MetricR6, R7, R9, R10
4MountingHoleMountingHole:MountingHole_2.2mm_M2H1, H2, H4, H5
2100kResistor_SMD:R_0402_1005MetricR11, R12
210pFCapacitor_SMD:C_0402_1005MetricC14, C15
2Conn_01x04_PinConnector_PinHeader_2.00mm:PinHeader_1x04_P2.00mm_Vertical_SMD_Pin1LeftJ2, J4
110nFCapacitor_SMD:C_0402_1005MetricC8
1120RInductor_SMD:L_0402_1005MetricFB1
116MHzCrystal:Crystal_SMD_3225-4Pin_3.2x2.5mmY1
11MResistor_SMD:R_0805_2012MetricR13
147kResistor_SMD:R_0402_1005MetricR8
1Conn_01x06_PinConnector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical_SMD_Pin1LeftJ3
1LEDPhotodiode:SOD6439X180ND1
1LOGOlogo:logo35_blackG***
1LOGOlogo:logoG***
1NMOSNMOS:SOT95P240X120-3NQ2
1PMOSPMOS:SOT95P240X120-3NQ1
1STM32G484METxPackage_QFP:LQFP-80_12x12mm_P0.5mmU1
1SW_PushButton_Switch_SMD:SW_SPST_TL3305BSW1
1SW_SPDTButton_Switch_SMD:SW_SPDT_PCM12SW2
1TPS7A0533PDBZPackage_TO_SOT_SMD:SOT-23U10
1TXU0202QDCURTXU0202:SOP50P310X90-8NIC1

More from N-Pulse/ARM-ELEC-CTRL

2
  • 4 layers38 × 119.5 mmNPulse v3, the printed circuit board in 3D

    NPulse v3

    N-Pulse/ARM-ELEC-CTRL

    Microcontroller : A STM32G484 optimized for mixed-signal applications with a 16MHz external oscillator. Control the 8 DC motors independently. Power Management : +12V supply +5V supplied from the Power Board.

    162 partsCC-BY-4.0
  • 4 layers39.8 × 44 mmConnecteur, the printed circuit board in 3D

    Connecteur

    N-Pulse/ARM-ELEC-CTRL

    Microcontroller : A STM32G484 optimized for mixed-signal applications with a 16MHz external oscillator. Control the 8 DC motors independently. Power Management : +12V supply +5V supplied from the Power Board.

    75 partsCC-BY-4.0

Similar boards

  • 2 layers27.6 × 30.5 mmMotionRecognitionWatch, the printed circuit board in 3D

    MotionRecognitionWatch

    AidenBTTU/Gesture-Capture-Watch

    A wristband-mounted gesture recognition system built around an STM32F411, IMU, and OLED display, with USB-C battery charging and ESD-protected I/O.

    46 parts
  • 2 layers44.7 × 76.6 mmATSAME54N20A AU, the printed circuit board in 3D

    ATSAME54N20A AU

    Albinjm72/Microchip-ATSAME54-Development-Board

    A fully custom development board built around the Microchip ATSAME54N20A-AU (ARM Cortex-M4F, 120MHz), designed end-to-end in KiCad — schematic, routing, and silkscreen.

    45 partsCERN-OHL-S-2.0
  • 2 layers30 × 30 mmLogger, the printed circuit board in 3D

    Logger

    Birb-jpg/stm32logger

    A 1in.^2 STM32 based flight data logger.

    62 parts
  • 4 layers157 × 105 mmFLoggy, the printed circuit board in 3D

    FLoggy

    markovejnovic/FLoggy

    Open source/hardware data collection platform

    212 parts
  • 4 layers88 × 35.8 mmNref ports one, the printed circuit board in 3D

    Nref ports one

    cetola/reform-next-mirror

    The original Open Hardware laptop, reloaded.

    153 parts
  • 4 layers65 × 30.5 mmLora nicerf hat, the printed circuit board in 3D

    Lora nicerf hat

    charlieh0tel/ee_stuff

    17 partsBSD-3-Clause
  • 4 layers65 × 30 mmIcepi zero, the printed circuit board in 3D

    Icepi zero

    cheyao/icepi-zero

    An ECP5 FPGA Dev Board in a Pi Zero form

    163 parts869
  • 4 layers108 × 54 mmMCU Powertrain, the printed circuit board in 3D

    MCU Powertrain

    mark-belbin/motor-controller

    Custom FOC motor controller designed for underwater robotics.

    163 parts43GPL-3.0

Questions

How big is the NPulse v4 PCB?

It measures 39.8 × 72.5 mm and has 4 copper layers, 1.6 mm thick.

What parts does the NPulse v4 use?

163 parts, built around the TPS7A0533PDBZ and TXU0202QDCURQ1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the NPulse v4 KiCad files?

From the N-Pulse/ARM-ELEC-CTRL repository on GitHub, at the commit this page was made from: the board is NPulse_v4/NPulse_v4.kicad_pcb and its schematic NPulse_v2/COM_EMG.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the NPulse v4 design in my own project?

Its repository publishes it under the CC-BY-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).