2 layers85 × 100 mm
2 layers85 × 85 mm
- Size
- 85 × 85 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 129
- Nets
- 72
- Pads
- 377
- Tracks, vias
- 714, 63
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 6 Dec 2024
- Updated
- 6 Dec 2024
Overview
Ud 29 is an open-source printed circuit board by MrSimranjitSingh, from the MrSimranjitSingh/ud_29 repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 85 × 85 mm with 129 parts on 72 nets, routed with 714 tracks and 63 vias.
It is built around the OPF2412T, UCC27324DR-TP and 74HC74D,653-JSM, with the LM311, SN74HC08DR(LX) and SN74HC14DR(LX) among its other parts. Its parts include 40 capacitors, 34 resistors, 18 diodes, 13 connectors and 10 ICs.
Main components
9OPF2412T
-- Fiber Optical Transceivers ROHSOPTEKPre-Ordered Products
UCC27324DR-TP
SOP-80℃~+125℃ 1.2V 2 2.4V 4.5V~15V 4A 7ns 8A 9ns MOSFET、IGBT Under Voltage Protection SOP-8 Gate Drivers ROHSTECH PUBLICGate Drivers
74HC74D,653-JSM
SOP-14-40℃~+125℃ 1 2 24MHz 2V~6V 2ns 3.5pF 45ns@6V 74HC 80uA Asynchronous Complementary D-Type Rising Edge Set and Reset SOP-14 Flip Flops ROHSJSMSEMIFlip FlopsLM311
SOP-80℃~+70℃ 1 1.7nA 2.4mA 200ns 2mV 36V 45nA 5V~30V TTL、CMOS ±15V SOP-8 Comparators ROHSGcoreComparatorsSN74HC08DR(LX)
SOP-14Logic GateslingxingicSN74HC14DR(LX)
SOP-14Inverterslingxingic
TL3116CD
SOIC-80℃~+70℃ 1 12.7mA 500uV 700nA 9.9ns CMOS SOIC-8 Comparators ROHSTexas InstrumentsComparators
MBR0530
SOD-1231 Independent 30V 5.5A 500mA 550mV@500mA 80uA@30V SOD-123 Schottky Diodes ROHSJiangsu Changjing Electronics Technology (CJ)Schottky Diodes
AOD609
TO-252-4-55℃~+175℃ 1 N-Channel + 1 P-Channel 1.125nF 1.7V 12A 21nC@10V 30W 40V 45mΩ@10V 68pF TO-252-4 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETs
README
README.mdud_29
Parts
129| Qty | Value | Footprint | References |
|---|---|---|---|
| 14 | 100n | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C2, C3, C9, C10, C13, C17, C23, C24, C28, C29, C30, C31, C33, C38 |
| 14 | 1k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R4, R6, R12, R14, R19, R20, R21, R25, R27, R30, R31, R32, R34 |
| 8 | 1N4148 | Diode_SMD:D_SOD-123 | D1, D2, D3, D9, D14, D16, D17, D18 |
| 7 | 470r | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R2, R10, R16, R17, R22, R23, R26 |
| 6 | 330u | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | C14, C15, C18, C19, C20, C22 |
| 6 | MBR0530 | Diode_SMD:D_SOD-123 | D4, D5, D7, D8, D11, D12 |
| 4 | 10u | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C21, C27, C32, C37 |
| 4 | 1n | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C5, C6, C7, C8 |
| 4 | 1u | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C12, C26, C36 |
| 4 | AOD609 | Package_TO_SOT_SMD:TO-252-4 | Q2, Q3, Q4, Q5 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.5mm_Pad_TopBottom | H1, H2, H3, H4 |
| 3 | 100k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R5, R15, R18 |
| 3 | 4.7u | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C16, C34, C39 |
| 3 | LED | LED_THT:LED_D5.0mm | D6, D10, D15 |
| 2 | 1.8k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R3, R13 |
| 2 | 10k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R7, R11 |
| 2 | 15r 0.5W | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R29, R33 |
| 2 | 2.2u | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C25, C35 |
| 2 | 5.1r 0.5W | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R8, R9 |
| 2 | UCC27324DR | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U11, U12 |
| 1 | 10k | Potentiometer_THT:Potentiometer_Bourns_3296W_Vertical | RV2 |
| 1 | 150p | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C11 |
| 1 | 1N4007 | Diode_SMD:D_SOD-123 | D13 |
| 1 | 1r | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R28 |
| 1 | 24V | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J10 |
| 1 | 2N3906 | Package_TO_SOT_THT:TO-92 | Q1 |
| 1 | 470p | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C4 |
| 1 | 51r 2W | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R24 |
| 1 | 5600u | Capacitor_THT:CP_Radial_D18.0mm_P7.50mm | C40 |
| 1 | 5k | Potentiometer_THT:Potentiometer_Bourns_3296W_Vertical | RV1 |
| 1 | 74HC74D,653 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U3 |
| 1 | CT | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J8 |
| 1 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J6 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | GDT0 | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J11 |
| 1 | GDT1 | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J12 |
| 1 | IFD95 | 0_MY_UD_LIB_FP:IFD95 | OP2 |
| 1 | LM311 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U5 |
| 1 | LM7805_TO220 | Package_TO_SOT_THT:TO-220-3_Vertical | U8 |
| 1 | LM7812_TO220 | Package_TO_SOT_THT:TO-220-3_Vertical | U7 |
| 1 | NCV303LSN27T1G | Package_TO_SOT_SMD:TSOT-23-5_HandSoldering | U2 |
| 1 | OCD | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J7 |
| 1 | OCD_TP | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J4 |
| 1 | OPF2412T | 0_MY_UD_LIB_FP:OPF2412T | OP1 |
| 1 | PHASE | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J13 |
| 1 | PHASE_LEAD | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J9 |
| 1 | Pulse_Skip | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J5 |
| 1 | SLOT7 | 0_MY_UD_LIB_FP:CoilCraft_Slot_7 | L1 |
| 1 | SN74HC08DR | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U4 |
| 1 | SN74HC14DR | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U1 |
| 1 | TL3116 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U6 |
| 1 | UVLO_EN | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | UVLO_TP | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J2 |
More from MrSimranjitSingh/ud_29
1Similar boards
- 2 layers97.5 × 97.5 mm
Ud27c
profdc9/DRSSTC-PCB-Pack
A pack of PCBs for a dual resonant solid state tesla coil setup. Pretty much everything you need.
106 parts59 - 2 layers290 × 280 mm
- 4 layers120 × 130 mm
- 2 layers96 × 48 mm
- 4 layers354 × 183.3 mm
DragonSTe
dragonmux/dragonSTe
A whole-cloth remake of the Atari 1040STe using modern parts and FPGAs reDIP-style for unobtanium components
339 parts3 - 2 layers62 × 58.6 mm
- 4 layers180 × 100 mm
Class board V0.2
TIGP-Experimental-Methods/class-board-2026
TIGP class instrument 2026: one board, five blocks - KiCad hardware, ESP32-S3 firmware, phone PWA, Python API, workbook
342 parts - 2 layers40.1 × 54.3 mm
Questions
How big is the Ud 29 PCB?
It measures 85 × 85 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Ud 29 use?
129 parts, built around the OPF2412T, UCC27324DR-TP, 74HC74D,653-JSM and LM311. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Ud 29 KiCad files?
From the MrSimranjitSingh/ud_29 repository on GitHub, at the commit this page was made from: the board is ud_29_v2/ud_29.kicad_pcb and its schematic ud_29_v1/power.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Ud 29 design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).