

Latch AMS IMD
Pcb schema electrica pentru latch urile AMS si IMD
- Size
- 62 × 58.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 50
- Nets
- 54
- Pads
- 172
- Tracks, vias
- 345, 42
- Pours
- 9
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 2 Nov 2025
- Updated
- 24 Jul 2026
Overview
Latch AMS IMD is an open-source printed circuit board by EVR-Tuiasi, from the EVR-Tuiasi/PCB_IMD-AMS_LATCH repository on GitHub. It is a 2-layer board of 62 × 58.6 mm with 50 parts on 54 nets, routed with 345 tracks and 42 vias.
It is built around the TPS54202DDC, IRFR220N and 74HC74D,653-JSM, with the LM339D, 1N4148W and IM06GR among its other parts. Its parts include 20 resistors, 8 capacitors, 7 ICs, 5 diodes and 4 switches.
Main components
6TPS54202DDC
SOT23-64.5V to 28V Input, 2A Output, EMI Friendly Synchronous Step Down ConverterTexas InstrumentsUncategorisedIRFR220N
TO-252-3LMOSFETsTECH PUBLIC74HC74D,653-JSM
SOP-14-40℃~+125℃ 1 2 24MHz 2V~6V 2ns 3.5pF 45ns@6V 74HC 80uA Asynchronous Complementary D-Type Rising Edge Set and Reset SOP-14 Flip Flops ROHSJSMSEMIFlip FlopsLM339D
SOIC-14-18V~-1V、1V~18V 0℃~+70℃ 1.3us 1.3us 25nA 2V~36V 2mV 36V 5nA 800uA Four channels Open Collector Rail-to-Rail Input, Rail-to-Rail Output TTL、CMOS SOIC-14 Comparators ROHSTexas InstrumentsComparators1N4148W
SOD-123150mA 1A 1V@50mA 1uA@75V 400mW 4ns 75V Independent SOD-123 Switching Diodes ROHSSTMicroelectronicsSwitching DiodesIM06GR
SMD,6x10mm-40℃~+85℃ 1.029kΩ 12V 140mW 220V@DC、250V@AC 250mA@250VAC、270mA@220VDC、500mA@125VAC、2A@30VDC 2A 3ms 3ms 50mΩ AgNi Two groups of conversions: 2C(Double-pole double-throw conversion) SMD,6x10mm Signal Relays ROHSTE ConnectivitySignal Relays
README
README.mdPCB_IMD-AMS_LATCH
Pcb schema electrica pentru latch urile AMS si IMD
Parts
50| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 0.1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C4, C5, C8 |
| 4 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R12, R17, R18 |
| 4 | 1N4148W | Latch_lib:1N4148W | D1, D2, D3, D4 |
| 4 | IM06GR | Latch_lib:RELAY_IM05GR | K1, K2, K3, K4 |
| 3 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5, R6, R11 |
| 3 | 22k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R9, R15, R16 |
| 2 | 1.5K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R4 |
| 2 | 10uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C3 |
| 2 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R19, R20 |
| 2 | 200 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R13, R14 |
| 2 | 22uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C6, C7 |
| 2 | 2N7002 | Package_TO_SOT_SMD:SOT-23 | U4, U5 |
| 2 | IRFR-220 | Package_TO_SOT_SMD:TO-252-2 | U6, U7 |
| 1 | 100k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R8 |
| 1 | 10uH | Inductor_SMD:L_Coilcraft_LPS4018 | L1 |
| 1 | 33K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 1 | 560k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7 |
| 1 | 5VTie | NetTie:NetTie-2_SMD_Pad2.0mm | NT2 |
| 1 | 74HC74D_653 | Latch_lib:74HC74D | U3 |
| 1 | 787k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R10 |
| 1 | GNDTie | NetTie:NetTie-2_SMD_Pad2.0mm | NT1 |
| 1 | LM339D | Latch_lib:LM339D | U2 |
| 1 | LOGO | LOGO | G*** |
| 1 | Main Connector | Connector_JST:JST_EH_S6B-EH_1x06_P2.50mm_Horizontal | J2 |
| 1 | SK32SMA | Diode_SMD:D_SMA | D5 |
| 1 | Signal Connector | Connector_JST:JST_EH_S8B-EH_1x08_P2.50mm_Horizontal | J1 |
| 1 | TPS54202DDC | Package_TO_SOT_SMD:SOT-23-6 | U1 |
Similar boards
- 4 layers170 × 90 mm

- 2 layers103 × 86.5 mm

Ventilator
Kbij/VentControl
Firmware for a custom made RP-2040 board with relays. Used for Ventilation control.
79 parts - 4 layers180 × 100 mm

Class board V0.2
TIGP-Experimental-Methods/class-board-2026
TIGP class instrument 2026: one board, five blocks - KiCad hardware, ESP32-S3 firmware, phone PWA, Python API, workbook
342 parts - 2 layers82.8 × 73.2 mm

- 4 layers90 × 70 mm

Prototip1
alejandromartinez03/ESC-BLDC-Design-and-Balanced-Embedded-Control
Editable KiCad design files for the central balancing/control board.
75 parts - 2 layers100 × 100 mm

RQ2 supply
deets/unifhy-rocket-engine-test-stand
Code, CAD and Description for a amateur rocket test stand.
24 parts1 - 2 layers31.1 × 40.6 mm

- 4 layers354 × 183.3 mm

DragonSTe
dragonmux/dragonSTe
A whole-cloth remake of the Atari 1040STe using modern parts and FPGAs reDIP-style for unobtanium components
339 parts3
Questions
How big is the Latch AMS IMD PCB?
It measures 62 × 58.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Latch AMS IMD use?
50 parts, built around the TPS54202DDC, IRFR220N, 74HC74D,653-JSM and LM339D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Latch AMS IMD KiCad files?
From the EVR-Tuiasi/PCB_IMD-AMS_LATCH repository on GitHub, at the commit this page was made from: the board is Latch_AMS_IMD/Latch_AMS_IMD.kicad_pcb and its schematic Latch_AMS_IMD/Latch_AMS_IMD.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Latch AMS IMD design in my own project?
Its repository states no licence, so its author keeps all rights: ask EVR-Tuiasi before reusing the design.