

Pcb proc control
- Size
- 162.5 × 125 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 210
- Nets
- 241
- Pads
- 851
- Tracks, vias
- 4,546, 216
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 14 Sep 2024
- Updated
- 14 Sep 2024
Overview
Pcb proc control is an open-source printed circuit board by MrGizmo123, from the MrGizmo123/Mentat repository on GitHub. It is a 2-layer board of 162.5 × 125 mm with 210 parts on 241 nets, routed with 4,546 tracks and 216 vias.
It is built around the 74LS04PC, 74LS273PC and 74LS157PC, with the 74LS161DC, 74LS32SC and NE555P among its other parts. Its parts include 103 resistors, 52 diodes, 24 capacitors, 23 ICs and 5 connectors.
Main components
674LS04PC
PDIP-140℃~+70℃ 4.75V~5.25V 6 6.6mA 74LS PDIP-14 InvertersonsemiInverters74LS273PC
PDIP-201 15ns 27mA 27ns@5V,15pF 30MHz 5ns 74LS Series 8 D-Type Reset Rising Edge PDIP-20 Flip Flops ROHSonsemiFlip Flops74LS157PC
PDIP-160℃~+70℃ 4.75V~5.25V Single Supply PDIP-16 Signal Switches, Multiplexers, Decoders ROHSTexas InstrumentsSignal Switches, Multiplexers, Decoders74LS161DC
-0℃~+70℃ 14ns 32MHz 4 4.75V~5.25V 74LS 93mW Asynchronous Binary Counter Programmable divide ratio、Reset function、Cascade counter、Synchronous counting Rising Edge Synchronous - Counters, DividersTexas InstrumentsCounters, Dividers74LS32SC
-- Logic Gates ROHSTexas InstrumentsLogic GatesNE555P
DIP-80℃~+70℃ 100kHz 10mA 4.5V~16V DIP-8 555 Timers / Counters ROHSTexas InstrumentsTimers / Counters
Parts
210| Qty | Value | Footprint | References |
|---|---|---|---|
| 52 | LED | LED_THT:LED_Rectangular_W5.0mm_H2.0mm | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +36 |
| 52 | R | Resistor_SMD:R_0805_2012Metric | R1, R2, R3, R11, R13, R15, R17, R19, R21, R23, R25, R27, R29, R31, R33, R35 +36 |
| 50 | 10K | Resistor_SMD:R_0805_2012Metric | R10, R12, R14, R16, R18, R20, R22, R24, R26, R28, R30, R32, R34, R100, R101, R102 +34 |
| 22 | C | Capacitor_SMD:C_0805_2012Metric | C1, C2, C3, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22 +6 |
| 12 | 74LS04 | Package_DIP:DIP-14_W7.62mm_Socket_LongPads | U3, U4, U5, U14, U15, U16, U17, U18, U19, U20, U21, U22 |
| 4 | ~ | Package_DIP:DIP-24_W15.24mm_Socket_LongPads | U7, U9, U10, U13 |
| 3 | SW_SPDT | Button_Switch_THT:SW_E-Switch_EG1271_SPDT | SW1, SW2, SW3 |
| 2 | 74LS273 | Package_DIP:DIP-20_W7.62mm_Socket_LongPads | U6, U12 |
| 1 | 10nF | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C24 |
| 1 | 20k | Resistor_SMD:R_0805_2012Metric | R103 |
| 1 | 74LS157 | Package_DIP:DIP-16_W7.62mm_Socket_LongPads | U11 |
| 1 | 74LS161 | Package_DIP:DIP-16_W7.62mm_Socket_LongPads | U8 |
| 1 | 74LS32 | Package_DIP:DIP-14_W7.62mm_Socket_LongPads | U1 |
| 1 | 74LS76 | Package_DIP:DIP-16_W7.62mm_Socket_LongPads | U2 |
| 1 | C_Polarized | Capacitor_THT:CP_Radial_D4.0mm_P1.50mm | C23 |
| 1 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J6 |
| 1 | Control Logic to ALU | Connector_PinHeader_2.54mm:PinHeader_2x16_P2.54mm_Vertical | J2 |
| 1 | Control Logic to Clock | Connector_PinHeader_2.54mm:PinHeader_2x16_P2.54mm_Vertical | J3 |
| 1 | Control Logic to RAM | Connector_PinHeader_2.54mm:PinHeader_2x16_P2.54mm_Vertical | J4 |
| 1 | Interrupt | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J1 |
| 1 | NE555P | Package_DIP:DIP-8_W7.62mm_Socket_LongPads | U23 |
More from MrGizmo123/Mentat
10- 2 layers162 × 108.5 mm

- 2 layers151 × 88 mm

- 2 layers100.6 × 72.4 mm

- 2 layers100.5 × 62 mm

- 2 layers101 × 59 mm

- 2 layers102 × 49 mm

- 2 layers128.5 × 68.5 mm

- 2 layers99 × 169.5 mm

- 2 layers83 × 58 mm

- 2 layers32 × 45 mm

Similar boards
- 2 layers370.8 × 298.5 mm

8 Bit Computer
The-Invent0r/8-bit-Computer-PCB
These are the KiCAD files for my 8-Bit Computer.
323 parts142 - 2 layers

- 2 layers236.8 × 169.8 mm

TK2000
clemarfolly/Microdigital-TK2000
Reprodução da PCB do TK-2000 da Microdigital, clone do Micro-Professor MPF-II
212 parts17 - 6 layers414 × 187.5 mm

- 4 layers246.4 × 185.4 mm

- 2 layers250 × 225 mm

8BitComputer
MatanBright/8BitComputer
This is a simple programmable 8-bit computer that is built from scratch.
333 parts2 - 2 layers486 × 306.3 mm

- 4 layers388.6 × 212.1 mm

Questions
How big is the Pcb proc control PCB?
It measures 162.5 × 125 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Pcb proc control use?
210 parts, built around the 74LS04PC, 74LS273PC, 74LS157PC and 74LS161DC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Pcb proc control KiCad files?
From the MrGizmo123/Mentat repository on GitHub, at the commit this page was made from: the board is pcb_proc_control/pcb_proc_control.kicad_pcb and its schematic pcb_proc_adder/adder16.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Pcb proc control design in my own project?
Its repository states no licence, so its author keeps all rights: ask MrGizmo123 before reusing the design.