
8 Bit Computer
The-Invent0r/8-bit-Computer-PCB
These are the KiCAD files for my 8-Bit Computer.

EDA designs
Sap be is an open-source printed circuit board by kyllikki, from the kyllikki/eda-designs repository on GitHub, published under the MIT licence. It is a 2-layer board with 148 parts on 228 nets.
It is built around the 74LS245SC, 74LS157PC and 74LS173SC, with the NE555, 74HC04D and 74LS04PC among its other parts. Its parts include 58 diodes, 44 ICs, 28 resistors, 8 capacitors and 6 switches.
This is a schematic capture of this project derived from the excellent video series [1]
The design belongs to Ben, I just made a schematic in kicad
This schematic is released under CC BY-SA licence
[1] https://www.youtube.com/watch?v=HyznrdDSSGM&list=PLowKtXNTBypGqImE405J2565dvjafglHU
| Qty | Value | Footprint | References |
|---|---|---|---|
| 58 | LED | LEDs:LED-5MM | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +42 |
| 15 | 470 | Resistors_THT:Resistor_Horizontal_RM7mm | R7, R8, R9, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R21 |
| 7 | 1K | Resistors_THT:Resistor_Horizontal_RM7mm | R1, R4, R5, R22, R23, R24, R28 |
| 4 | 74LS157 | Housings_DIP:DIP-16_W7.62mm_LongPads | U36, U37, U40, U44 |
| 4 | 74LS173 | Housings_DIP:DIP-16_W7.62mm_LongPads | U10, U15, U16, U35 |
| 4 | LTS-6980HR | Displays_7-Segment:7SegmentLED_LTS6760_LTS6780 | AFF1, AFF2, AFF3, AFF4 |
| 3 | 220 | Resistors_THT:Resistor_Horizontal_RM7mm | R3, R26, R27 |
| 3 | 28C16 | Housings_DIP:DIP-24_W15.24mm_LongPads | U22, U25, U27 |
| 3 | 74LS245 | Housings_DIP:DIP-20_W7.62mm_LongPads | U14, U17, U43 |
| 3 | NE555 | Housings_DIP:DIP-8_W7.62mm_LongPads | U19, U30, U31 |
| 2 | 0.1u | Capacitors_THT:C_Disc_D6_P5 | C7, C8 |
| 2 | 0.1uF | Capacitors_THT:C_Disc_D6_P5 | C5, C6 |
| 2 | 10n | Capacitors_THT:C_Disc_D6_P5 | C3, C4 |
| 2 | 74HC04 | Housings_DIP:DIP-14_W7.62mm_LongPads | U28, U29 |
| 2 | 74LS04 | Housings_DIP:DIP-14_W7.62mm_LongPads | U32, U41 |
| 2 | 74LS08 | Housings_DIP:DIP-14_W7.62mm_LongPads | U18, U33 |
| 2 | 74LS161 | Housings_DIP:DIP-16_W7.62mm_LongPads | U13, U24 |
| 2 | 74LS173 | Housings_DIP:DIP-14_W7.62mm_LongPads | U7, U8 |
| 2 | 74LS189 | Housings_DIP:DIP-16_W7.62mm_LongPads | U38, U39 |
| 2 | 74LS245 | Housings_DIP:DIP-16_W7.62mm_LongPads | U5, U9 |
| 2 | 74LS86 | Housings_DIP:DIP-16_W7.62mm_LongPads | U1, U2 |
| 2 | SW_Push | Buttons_Switches_THT:SW_PUSH_6mm_h9.5mm | SW2, SW6 |
| 2 | SW_SPDT | Buttons_Switches_THT:SW_Micro_SPST | SW1, SW4 |
| 1 | 0.1uF | Capacitors_THT:C_Disc_D3_P2.5 | C1 |
| 1 | 100K | Resistors_THT:Resistor_Horizontal_RM7mm | R6 |
| 1 | 1M | Resistors_THT:Resistor_Horizontal_RM7mm | R25 |
| 1 | 1M | Potentiometers:Potentiometer_Alps-RK16-single | R2 |
| 1 | 1uF | Capacitors_THT:C_Radial_D5_L11_P2 | C2 |
| 1 | 7400 | Housings_DIP:DIP-14_W7.62mm_LongPads | U42 |
| 1 | 74LS138 | Housings_DIP:DIP-16_W7.62mm_LongPads | U26 |
| 1 | 74LS139 | Housings_DIP:DIP-16_W7.62mm_LongPads | U23 |
| 1 | 74LS173 | Housings_DIP:DIP-20_W7.62mm_LongPads | U11 |
| 1 | 74LS245 | Housings_DIP:DIP-8_W7.62mm_LongPads | U12 |
| 1 | 74LS273 | Housings_DIP:DIP-20_W7.62mm_LongPads | U20 |
| 1 | 74LS283 | Housings_DIP:DIP-16_W7.62mm_LongPads | U4 |
| 1 | 74LS283 | Housings_DIP:DIP-20_W7.62mm_LongPads | U3 |
| 1 | 74LS32 | Housings_DIP:DIP-14_W7.62mm_LongPads | U34 |
| 1 | 74LS76 | Housings_DIP:DIP-16_W7.62mm_LongPads | U21 |
| 1 | NE555 | Housings_DIP:DIP-20_W7.62mm_LongPads | U6 |
| 1 | SW_DIP_x04 | Buttons_Switches_THT:SW_DIP_x4_Slide | SW5 |
| 1 | SW_DIP_x08 | Buttons_Switches_THT:SW_DIP_x8_Slide | SW3 |

The-Invent0r/8-bit-Computer-PCB
These are the KiCAD files for my 8-Bit Computer.




rraider/Seminarkurs2021
Entwicklung eines turingvollständigen, primitiven Microcontroller in der Software Digital

btb/80ColumnCard
An Apple II 80-Column Card. Based on the Videx Videoterm

MatanBright/8BitComputer
This is a simple programmable 8-bit computer that is built from scratch.

Trilobyte-CPU/8-bit-computer
A DIY 8-bit computer built mostly with discrete logic chips
148 parts, built around the 74LS245SC, 74LS157PC, 74LS173SC and NE555. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the kyllikki/eda-designs repository on GitHub, at the commit this page was made from: the board is SAP-BE/sap-be.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).