2 layers145 × 108.7 mm
ESP32 Connections
Monitoramento-do-Ar-PI2/zefiro-electronics
This is the electronic team repository, here you can find the development of embedded system codes, eletronic schematics and pcb layouts.
20 parts
2 layers87.8 × 69 mm
Simetrica v2
Monitoramento-do-Ar-PI2/zefiro-electronicsThis is the electronic team repository, here you can find the development of embedded system codes, eletronic schematics and pcb layouts.
- Size
- 87.8 × 69 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 20
- Nets
- 7
- Pads
- 38
- Tracks, vias
- 62, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 6 Nov 2020
- Updated
- 4 Dec 2020
Overview
Simetrica v2 is an open-source printed circuit board by Monitoramento-do-Ar-PI2, from the Monitoramento-do-Ar-PI2/zefiro-electronics repository on GitHub. It is a 2-layer board of 87.8 × 69 mm with 20 parts on 7 nets, routed with 62 tracks and 0 vias.
It is built around the TIP42. Its parts include 4 capacitors, 4 resistors, 4 connectors, 1 IC and 1 diode.
Main components
1README
README.mdZefiro electronics
This is the electronic team repository, here you can find the development of embedded system codes, eletronic schematics and pcb layouts.
Parts
20| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole | MountingHole:MountingHole_2mm | H1, H2, H3, H4 |
| 3 | Power Output | Connector_Molex:Molex_KK-254_AE-6410-02A_1x02_P2.54mm_Vertical | J2, J3, J4 |
| 2 | 0.1uF | Capacitor_THT:C_Disc_D6.0mm_W2.5mm_P5.00mm | C1, C3 |
| 1 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2 |
| 1 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R8 |
| 1 | 220uF | Capacitor_THT:C_Radial_D6.3mm_H11.0mm_P2.50mm | C2 |
| 1 | 22uF | Capacitor_THT:C_Radial_D6.3mm_H11.0mm_P2.50mm | C4 |
| 1 | 4.7 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | 6k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R7 |
| 1 | L7806 | Package_TO_SOT_THT:TO-220-3_Vertical | U1 |
| 1 | LED | LED_THT:LED_D3.0mm | D1 |
| 1 | Power Input | Connector_Phoenix_MSTB:PhoenixContact_MSTBA_2,5_2-G-5,08_1x02_P5.08mm_Horizontal | J1 |
| 1 | SW_Push | Button_Switch_THT:SW_DIP_SPSTx01_Slide_9.78x4.72mm_W7.62mm_P2.54mm | SW1 |
| 1 | TIP42 | Package_TO_SOT_THT:TO-220-3_Vertical | Q1 |
More from Monitoramento-do-Ar-PI2/zefiro-electronics
4- 2 layers68.8 × 52.8 mm
Motor coupler
Monitoramento-do-Ar-PI2/zefiro-electronics
This is the electronic team repository, here you can find the development of embedded system codes, eletronic schematics and pcb layouts.
11 parts - 2 layers42.7 × 27.9 mm
Vertical motors
Monitoramento-do-Ar-PI2/zefiro-electronics
This is the electronic team repository, here you can find the development of embedded system codes, eletronic schematics and pcb layouts.
7 parts - 2 layers30 × 30 mm
Ldr coon
Monitoramento-do-Ar-PI2/zefiro-electronics
This is the electronic team repository, here you can find the development of embedded system codes, eletronic schematics and pcb layouts.
4 parts
Similar boards
- 2 layers100 × 100 mm
QRPAmplifier
profdc9/QRPAmplifier
Layout of WA2EBY amplifier in Kicad, licensed CC-BY-SA 4.0
133 parts26 - 2 layers99.3 × 98.6 mm
FlexiblePS
profdc9/FlexibleCharger
An Arduino-controlled charger for different kinds of batteries, or it can be a standalone power supply
118 parts13 - 2 layers100 × 100 mm
KicadJE EuroPowerSupply
promesoft/KicadJE-EuroPowerSupply
Takes a Laptop 19V input and makes +-12 and 5 v out
107 parts8MIT - 2 layers77.5 × 50.8 mm
Protection board
Markus-Fitz/Protection-board
Speaker-protection board for power amplifier.
71 parts1GPL-3.0 - 2 layers65 × 85 mm
Function Generator
MUDAL/Function-Generator
Custom Function Generator designed and developed by Olaoluwa Raji. This project is a complete embedded system solution with both hardware and software implemented by me. Relevant reference materials are included.
30 parts1GPL-3.0 - 2 layers211.2 × 87.8 mm
- 2 layers55.7 × 48.7 mm
Amplifier
ANSHAD134/PCB-Files
A collection of my personal KiCad PCB design projects, custom symbol/footprint libraries, and 3D models used across different electronics builds.
20 parts - 2 layers107 × 56 mm
Secu3 vag mono
borislav968/s3mono
ЭСУД SECU-3 поддерживает использование регуляторов холостого хода на основе шагового привода или электромагнита (ШИМ).
112 parts
Questions
How big is the Simetrica v2 PCB?
It measures 87.8 × 69 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Simetrica v2 use?
20 parts, built around the TIP42. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Simetrica v2 KiCad files?
From the Monitoramento-do-Ar-PI2/zefiro-electronics repository on GitHub, at the commit this page was made from: the board is AnalogElectronics/Conversor_Tensao/Simetrica_v2.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Simetrica v2 design in my own project?
Its repository states no licence, so its author keeps all rights: ask Monitoramento-do-Ar-PI2 before reusing the design.