

MotorControllerNode
- Size
- 100 × 100 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 32
- Nets
- 84
- Pads
- 207
- Tracks, vias
- 344, 34
- Pours
- 34
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 15 Feb 2026
- Updated
- 6 May 2026
Overview
MotorControllerNode is an open-source printed circuit board by Monash-Railway-Express, from the Monash-Railway-Express/KiCad_Files repository on GitHub. It is a 4-layer board of 100 × 100 mm with 32 parts on 84 nets, routed with 344 tracks and 34 vias.
It is built around the ESP32-S3-DEVKITC-1-N8, SN65HVD230D and TXS0108EQPWRQ1, with the J104D2C5VDC.20S among its other parts. Its parts include 9 capacitors, 8 connectors, 6 ICs, 5 resistors and 1 diode. It belongs with the ESP32 boards of this library.
Main components
4ESP32-S3-DEVKITC-1-N8
-- WiFi Modules ROHSEspressif SystemsWiFi ModulesSN65HVD230D
SOIC-8-40℃~+85℃ 1 17mA 1Mbps 370uA 3V~3.6V CAN Transceiver Low-power mode、Wake-up function、ESD protection、Thermal shutdown protection、Bus fault protection、Hot-swap protection SOIC-8 CAN Transceivers ROHSTexas InstrumentsCAN TransceiversTXS0108EQPWRQ1
TSSOP-20-40℃~+125℃ 1 1.4V~3.6V 1.65V~5.5V 110Mbps 8 Auto Direction Detection Bidirectional Push-Pull、Open-drain TSSOP-20 Translators, Level Shifters ROHSTexas InstrumentsTranslators, Level ShiftersJ104D2C5VDC.20S
插件-40℃~+85℃ 100V@DC、250V@AC 125Ω 1A@120VAC、2A@24VDC 200mW 2A 4ms 50mΩ 5V 6ms AgNi + Gold plated Two groups of conversions: 2C(Double-pole double-throw conversion) 插件 Signal Relays ROHSCIT Relay and SwitchSignal Relays
README
README.mdKiCad-Libraries
To add the footprint library, go to Assign footprints -> Manage footprint libraries -> Add existing library and select the MREx.pretty folder. Alternatively, from the main KiCad project go to Preferences -> Manage footprint libraries -> Add existing library and select the MREx.pretty folder. The library “MREx” will then appear in the footprint library list and you will be able to access its footprints in Assign footprints. When updates are made to the library, pull origin in the cloned repo (clone this repo) and KiCad will use the updated library automatically.
Parts
32| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 0.1uf | Capacitor_SMD:C_0603_1608Metric | C2, C3, C5, C6, C7, C8, C9 |
| 4 | 10k | Resistor_SMD:R_0603_1608Metric | R1, R2, R3, R4 |
| 2 | LOGO | LOGO | G***, G*** |
| 2 | TXS0108EQPWRQ1 | SamacSys_Parts:SOP65P640X120-20N | IC2, IC3 |
| 1 | 1.5uf | Capacitor_SMD:C_0603_1608Metric | C4 |
| 1 | 1N914 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D1 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5 |
| 1 | 470uf | Capacitor_THT:C_Radial_D8.0mm_H11.5mm_P3.50mm | C1 |
| 1 | Battery negative | TerminalBlock_CUI:TerminalBlock_CUI_TB007-508-02_1x02_P5.08mm_Horizontal | J6 |
| 1 | DAC53202RTER | Package_DFN_QFN:Texas_RTE0016D_WQFN-16-1EP_3x3mm_P0.5mm_EP0.8x0.8mm | IC1 |
| 1 | DSUB15 J2 | MREx:DSUB15_FEMALE_RIGHT-ANGLE-THT_A-HDF15A-KG-TAXB | J9 |
| 1 | DSUB9 J1 | MREx:DSUB9_FEMALE_RIGHT-ANGLE-THT_2301844-1_TEC | J2 |
| 1 | DSUB9 to backplane | MREx:DSUB9_FEMALE_RIGHT-ANGLE-THT_2301844-1_TEC | J5 |
| 1 | ESP32-S3-DevKitC | PCM_Espressif:ESP32-S3-DevKitC | U1 |
| 1 | Encoder | MREx:SCREW-TERMINAL_2.54mm_1725672_PXC | J3 |
| 1 | GPIO | MREx:SCREW-TERMINAL_2.54mm_1725672_PXC | J4 |
| 1 | J104D2C5VDC.20S | MREx:RELAY8_J104D2C5VDC.20S_CRS | U3 |
| 1 | NPN | Package_TO_SOT_THT:TO-92 | Q1 |
| 1 | Reversing contactor 1 | TerminalBlock_CUI:TerminalBlock_CUI_TB007-508-02_1x02_P5.08mm_Horizontal | J7 |
| 1 | Reversing contactor 2 | TerminalBlock_CUI:TerminalBlock_CUI_TB007-508-02_1x02_P5.08mm_Horizontal | J8 |
| 1 | SN65HVD230 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |
More from Monash-Railway-Express/KiCad_Files
11- 4 layers64.3 × 97.6 mm

- 4 layers132.7 × 121.4 mm

- 2 layers100 × 100 mm

- 2 layers110.2 × 89.6 mm

- 2 layers100 × 100 mm

- 2 layers100 × 91.7 mm

- 2 layers100 × 91.7 mm

- 2 layers79 × 90.9 mm

- 2 layers52 × 100 mm

- 2 layers100 × 100 mm

- 2 layers100 × 100 mm

Similar boards
- 4 layers44.6 × 90 mm

Syzygy breakout flash LVL
adamcritchley/syzygy-breakout-flash-LVL
SYZYGY Breakout Board with level shifters for any voltage flash chip
33 parts2MIT - 4 layers75 × 59.2 mm

Data logger
Mutzi1211/Wasserrakete
Ein Überblick über alle Projektbestandteile – von CAD über Code bis zu Anforderungen und Abgaben.
65 parts1 - 2 layers57.9 × 67.9 mm

- 2 layers96.3 × 78.3 mm

Actuation board2
cuspaceflight/Engine-Test-Stand-Instrumentation
Engine test stand for Cambridge University Space Flight
20 parts - 2 layers100 × 86.5 mm

SensactHs modular esp32
klaus-liebler/sensact
Es gibt vier Namespaces für Nachrichten "REQUEST" und "RESPONSE", "EVENT" und "ACKNOWLEDGE". Dies wird mit den beiden LSB des Versions-Namespace-Bytes erklärt (Somit bleiben 64 Versionierungsmöglichkeiten) Alle vier…
28 parts4Apache-2.0 - 4 layers95 × 95 mm

Cube motherboard
willem-pennings/balancing-cube
A cube that balances itself in a corner or edge using reaction wheels
52 parts1.1kGPL-3.0 - 2 layers129.9 × 63.6 mm

Traeger rev 2.3.0.kicad pro
jazzmonger/Traeger-PID-Controller
Traeger Smoker/Grill Controller based on an
45 parts36 - 2 layers168.8 × 78.9 mm

Gameboy3
ohasanov-hbrw/tribit32-advanced
A tri-microcontroller, overengineered GameBoy Advance clone. More value was given to the controls and the exterior look, which is cool!
61 parts8
Questions
How big is the MotorControllerNode PCB?
It measures 100 × 100 mm and has 4 copper layers, 1.6 mm thick.
What parts does the MotorControllerNode use?
32 parts, built around the ESP32-S3-DEVKITC-1-N8, SN65HVD230D, TXS0108EQPWRQ1 and J104D2C5VDC.20S. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the MotorControllerNode KiCad files?
From the Monash-Railway-Express/KiCad_Files repository on GitHub, at the commit this page was made from: the board is PCBs/MotorPCB/MotorControllerNode/MotorControllerNode.kicad_pcb and its schematic PCBs/Archive/ScreenPCB/Screen_PCB/Screen_PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the MotorControllerNode design in my own project?
Its repository states no licence, so its author keeps all rights: ask Monash-Railway-Express before reusing the design.