2 layers80 × 32.5 mm
CANPCB
Momozavur/CANPCB
Open the appropriate .kicadpro file in KiCad; .pro entries are legacy projects. Keep schematics, boards, local libraries, library tables, and supporting files together.
9 parts
2 layers69.5 × 62.4 mm
BDR Intro Proj
Momozavur/CANnode2Open the appropriate .kicadpro file in KiCad; .pro entries are legacy projects. Keep schematics, boards, local libraries, library tables, and supporting files together.
- Size
- 69.5 × 62.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 30
- Nets
- 61
- Pads
- 144
- Tracks, vias
- 192, 43
- Pours
- 14
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 10 Sep 2026
- Updated
- 10 Sep 2026
Overview
BDR Intro Proj is an open-source printed circuit board by Momozavur, from the Momozavur/CANnode2 repository on GitHub. It is a 2-layer board of 69.5 × 62.4 mm with 30 parts on 61 nets, routed with 192 tracks and 43 vias.
It is built around the SN65HVD231QDRQ1, TEENSY 4.1 and TB001-500-12BE, with the TPS22810DRV among its other parts. Its parts include 8 capacitors, 6 resistors, 3 connectors, 2 diodes and 1 switch. It belongs with the NXP (LPC, Kinetis, i.MX RT) boards of this library.
Main components
4
SN65HVD231QDRQ1
SOIC-8-40℃~+125℃ 100nA 17mA 1Mbps 3V~3.6V CAN Transceiver SOIC-8 CAN Transceivers ROHSTexas InstrumentsCAN Transceivers
TEENSY 4.1
Development Boards & Kits - ARM ModuleSparkFun ElectronicsUncategorisedTB001-500-12BE
插件,P=5mm1 12 15A 300V 5mm Blue 插件,P=5mm Screw Terminal Blocks ROHSCUIScrew Terminal Blocks
TPS22810DRV
WSON-6-EP(2x2)-40℃~+105℃ 1 2.7V~18V 3A 79mΩ Active High Load Switch Undervoltage Protection(UVP)、Over Temperature Protection WSON-6-EP(2x2) Power Distribution Switches ROHSTexas InstrumentsPower Distribution Switches
README
README.mdCANnode2
KiCad design files for CANnode2.
Project files
Open the appropriate .kicad_pro file in KiCad; .pro entries are legacy projects. Keep schematics, boards, local libraries, library tables, and supporting files together. Hierarchical schematic sheets are part of their parent design.
Git workflow
Automatic backups, recovery files, editor state, and filesystem metadata are ignored. Existing fabrication outputs and local component libraries are retained. For existing repositories, ignore rules do not automatically untrack previously committed files.
Review and save a meaningful design revision with:
git status --short
git diff
git add -- <changed-files>
git commit -m "Describe the design change"Documentation images
Add a clear 3D board view at docs/images/board-3d.png and, optionally, a PCB layout view at docs/images/pcb-layout.png. A schematic PDF is useful for reading circuit details. Once present, embed an image in this README with . For folders with several designs, use a separate named image for each.
Design notes to complete
Describe purpose, power and connectors, revision status, assembly requirements, and what has been physically tested. The repository setup does not establish electrical correctness or manufacturing readiness.
Parts
30| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole_Pad | MountingHole:MountingHole_4.3mm_M4_DIN965_Pad | H1, H2, H3, H5 |
| 3 | 10uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C3, C7 |
| 3 | 22uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5, C6, C8 |
| 2 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C4 |
| 2 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1, D2 |
| 2 | RJ11-4 | RJ11:438600006 | J1, J4 |
| 1 | 100kΩ | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6 |
| 1 | 10kΩ | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
| 1 | 120Ω | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 1kΩ | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4 |
| 1 | 3.3uH | Inductor_SMD:L_1008_2520Metric_Pad1.43x2.20mm_HandSolder | L1 |
| 1 | 300Ω | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5 |
| 1 | 3557-2 | BDR_Fuse_Holder:FUSE_3557-2 | 1AF1 |
| 1 | 54.9kΩ | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 1 | LOGO | LOGO | G*** |
| 1 | SN65HVD231QDR | SN65HVD231QDR:SOIC127P599X175-8N | CAN1 |
| 1 | TB001-500-12BE | TB001_500_12BE:CUI_TB001-500-12BE | J3 |
| 1 | TPS22810DRV | Package_SON:WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mm | SW1 |
| 1 | TPS562201DDCR | TPS562201DDCR:SOT95P280X110-6N | DCDC1 |
| 1 | Teensy4.1 | teensy.pretty-master:Teensy41 | T4.1 |
Similar boards
- 2 layers50 × 77.5 mm
GPS board v3
MatthewBoeding/GPSboard
Lab 2 for ECEN-435 design files. Will update as necessary.
17 parts1BSD-3-Clause - 2 layers69.1 × 67.5 mm
STM32G474RET6 Isolated
Momozavur/STM32G474RET6-Isolated-V0
KiCad design files for STM32G474RET6 Isolated V0.
74 parts - 4 layers26 × 46.5 mm
Day 02 Four Port USB C
i2cjak/Framework_Expansion_Cards
In which i2cjak creates a new expansion card design every day until he is given a NICE Framework laptop
54 parts95CERN-OHL-P-2.0 - 6 layers330 × 200 mm
Pcb b compute
meshsat/meshsat-fieldkit
MeshSat field kit hardware: the V1 kits as built, the V2 carrier PCB set for the Peli 1450 and the compact pocket-sized node (KiCad and OpenSCAD sources, generators, release files, build guides).
957 parts4CERN-OHL-S-2.0 - 4 layers50.5 × 80 mm
- 4 layers65 × 42 mm
Receiver
andrew153d/RemoteWelderController
A pair of devices meant to retrofit older welders with wireless connectivity. This document covers the usage and mechanical makeup, the cost overview can be found here.
131 parts1 - 4 layers76 × 88 mm
Questions
How big is the BDR Intro Proj PCB?
It measures 69.5 × 62.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the BDR Intro Proj use?
30 parts, built around the SN65HVD231QDRQ1, TEENSY 4.1, TB001-500-12BE and TPS22810DRV. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the BDR Intro Proj KiCad files?
From the Momozavur/CANnode2 repository on GitHub, at the commit this page was made from: the board is BDR_Intro_Proj.kicad_pcb and its schematic BDR_Intro_Proj.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the BDR Intro Proj design in my own project?
Its repository states no licence, so its author keeps all rights: ask Momozavur before reusing the design.