Skip to the content
2 layers15 × 31 mmIPico V5, the printed circuit board in 3D

RP2350 based UF2 hardware security key

Size
15 × 31 mm
Copper layers
2
Thickness
1.2 mm
Parts
44
Nets
63
Pads
183
Tracks, vias
286, 45
Pours
61
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
19 Apr 2025
Updated
19 Apr 2025

Overview

IPico V5 is an open-source printed circuit board by MiniProjectDIY, from the MiniProjectDIY/iPico repository on GitHub, published under the CC0-1.0 licence. It is a 2-layer board of 15 × 31 mm with 44 parts on 63 nets, routed with 286 tracks and 45 vias.

It is built around the ZD25WQ32CEIGR, TPESD0402G05V and ABM8-272-T3, with the AOTA-B201610S3R3-101-T, BSMD0402L-020 and GT-USB-8016A among its other parts. Its parts include 19 capacitors, 8 resistors, 4 ICs, 3 diodes and 1 connector. It belongs with the RP2350 boards of this library.

Main components

7

README

README.md

iPico

RP2350 based UF2 hardware security key

Hardware

iPico use the same IO as official raspberry pi Pico2 board, just replaced physical push button with capacitive touch button on pcb and change usb connector from female to male.

Firmware

Use pico-fido firmware for pico 2 board will do.

Enclosure

3d printed case using file from 3D folder,using M1.4* 2 heat inserts and M1.4*5 counter sink screws.

IMG_3967

IMG_3968

Parts

44
QtyValueFootprintReferences
8C_0402_100nF_10V_X7RCapacitor_SMD:C_0402_1005MetricC6, C7, C11, C12, C14, C15, C18, C19
7C_0402_4.7uF_10V_X5RCapacitor_SMD:C_0402_1005MetricC1, C2, C5, C8, C20, C21, C22
4M1.4 HoleLT_TinyMountingHole:MountingHole-M1.4H1, H2, H3, H4
3R_0402_27_5%Resistor_SMD:R_0402_1005MetricR2, R3, R4
2C_0402_15pF_50V_C0GCapacitor_SMD:C_0402_1005MetricC13, C16
2R_0402_1K_5%Resistor_SMD:R_0402_1005MetricR5, R6
2TPESD0402G05VResistor_SMD:R_0402_1005MetricD1, D2
1662KPackage_TO_SOT_SMD:SOT-23U5
1ABM8-272-T3Crystal:Crystal_SMD_2520-4Pin_2.5x2.0mmY1
1AOTA-B201610S3R3-101-TLT_Inductor:LT_L0806L1
1BSMD0402L-020Fuse:Fuse_0402_1005MetricF1
1C_0402_1pF_50V_C0GCapacitor_SMD:C_0402_1005MetricC4
1C_0402_1uF_10V_X5RCapacitor_SMD:C_0402_1005MetricC3
1GT-USB-8016ALT_GT-USB-8016A:GT-USB-8016AJ1
1Jumper_2_OpenJumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mmJP1
1NCD0603B1LED_SMD:LED_0603_1608MetricD3
1RP2350A-QFN60LT_QFN60:RP2350A_QFN-60_EP_7.75x7.75_Pitch0.4mmU2
1R_0402_33_5%Resistor_SMD:R_0402_1005MetricR10
1R_0402_470_5%Resistor_SMD:R_0402_1005MetricR7
1R_0402_5.1K_5%Resistor_SMD:R_0402_1005MetricR1
1TTP223_SOT23-6Package_TO_SOT_SMD:SOT-23-6U4
1TestPointLT_TestPoint:TP_8MMTP1
1ZD25WQ32CEIGRLT_USON8:USON8-2x3mm-EP0.2x1.6mmU1

More from MiniProjectDIY/iPico

1
  • 2 layers75 × 70 mmIPicoV5 Panelized, the printed circuit board in 3D

    IPicoV5 Panelized

    MiniProjectDIY/iPico

    RP2350 based UF2 hardware security key

    228 parts5CC0-1.0

Similar boards

  • 2 layers73.5 × 47.5 mmEinkBadge, the printed circuit board in 3D

    EinkBadge

    Las-Vejas/badge

    An E-ink badge run by RP2040, with NFC capabilities.

    67 partsGPL-3.0
  • 2 layers93 × 52 mmJT Business Card, the printed circuit board in 3D

    JT Business Card

    MontgomeryResearchLabs/C.A.R.D.

    Connection And Resuable Device

    527 partsMIT
  • 4 layers140 × 100 mmRcm dish controller, the printed circuit board in 3D

    Rcm dish controller

    jrseti/Dish

    Simple controller with toggle switches to move the dish motors

    314 partsCC0-1.0
  • 4 layers150 × 100 mmCm4-robo controller, the printed circuit board in 3D

    Cm4-robo controller

    jrseti/roboclaw-cm4-dc-dish-controller

    Satellite dish controller using a ROBOCLAW-2X15A-OEM controlled by a Raspberry Pi CM4 module. Powered by DC battery.

    292 partsMIT
  • 2 layers37.3 × 31.8 mmKeyChain, the printed circuit board in 3D

    KeyChain

    Brammert42/EPKeychain

    A keychain equipped with a RP2040 and a E-ink

    88 parts
  • 6 layers29 × 33 mmMINIREX G4, the printed circuit board in 3D

    MINIREX G4

    mathieupommery/MINIREX_G473

    The following table demonstrates the estimated component costs based on Mouser volume pricing. The unit price of each component dynamically adapts to the total quantity required for the entire production batch (1, 100…

    109 parts10
  • 4 layers74 × 48 mmCastleBox NeoPro, the printed circuit board in 3D

    CastleBox NeoPro

    zeankundev/boards

    A collection and an archive of KiCad projects I made. Contains projects from 2023 - 2024.

    107 parts1

Questions

How big is the IPico V5 PCB?

It measures 15 × 31 mm and has 2 copper layers, 1.2 mm thick.

What parts does the IPico V5 use?

44 parts, built around the ZD25WQ32CEIGR, TPESD0402G05V, ABM8-272-T3 and AOTA-B201610S3R3-101-T. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the IPico V5 KiCad files?

From the MiniProjectDIY/iPico repository on GitHub, at the commit this page was made from: the board is iPico_V5.kicad_pcb and its schematic iPicoV5_Panelized/iPicoV5_Panelized.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the IPico V5 design in my own project?

Its repository publishes it under the CC0-1.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).