Skip to the content
2 layersSmart puck, the printed circuit board in 3D

A Zigbee sensor puck

Copper layers
2
Thickness
1.6 mm
Parts
31
Nets
53
Pads
186
Tracks, vias
53, 0
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
11 Aug 2026
Updated
2 Sep 2026

Overview

Smart puck is an open-source printed circuit board by MichaelK-F, from the MichaelK-F/smart-puck repository on GitHub. It is a 2-layer board with 31 parts on 53 nets, routed with 53 tracks and 0 vias.

It is built around the BQ25185DLHR, ESP32-C6-MINI-1 and MAX17048G+T10, with the GT-TZ084B-H015-L1 and RS-C1415MBAR among its other parts. Its parts include 13 resistors, 7 capacitors, 5 ICs, 3 connectors and 1 diode. It belongs with the ESP32 and RISC-V boards of this library.

Main components

5

README

README.md

Parts

31
QtyValueFootprintReferences
310kOhmResistor_SMD:R_0805_2012MetricR4, R12, R13
31uFCapacitor_SMD:C_0603_1608MetricC3, C5, C7
210uFCapacitor_SMD:C_0603_1608MetricC2, C4
24.7kOhmResistor_SMD:R_0402_1005MetricR7, R8
25.1kOhmResistor_SMD:R_0402_1005MetricR2, R3
268OhmResistor_SMD:R_0402_1005MetricR9, R10
10.1uFCapacitor_SMD:C_0603_1608MetricC6
1100OhmResistor_SMD:R_0402_1005MetricR11
118kOhmResistor_SMD:R_0603_1608MetricR5
11kOhmResistor_SMD:R_0603_1608MetricR6
12.2uH 30mOhmInductor_SMD:L_TechFuse_SL0624L1
122uFCapacitor_SMD:C_0603_1608MetricC1
136.5kOhmResistor_SMD:R_0402_1005MetricR1
1BQ25185DLHRBQ25185:WSON10_DLH_TEXU4
1BatteryConnector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_HorizontalJ3
1ESP32-C6-MINI-1RF_Module:ESP32-C6-MINI-1U1
1GT-TZ084B-H015-L1GT-TZ084B-H015-L1:SW-SMD_4P-L5.2-W5.2-P3.70-LS6.4SW1
1HLK-LD2420Connector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_VerticalJ2
1MAX17048G+T10MAX17048G:21-0168E_T822-3_MXMU5
1RS-C1415MBARRS-C1415MBAR:LED-ARRAY-SMD_4P-L1.6-W1.6-BR-RD-CWD1
1SHT4xSensor_Humidity:Sensirion_DFN-4_1.5x1.5mm_P0.8mm_SHT4x_NoCentralPadU3
1TPS63900Package_SON:WSON-10-1EP_2.5x2.5mm_P0.5mm_EP1.2x2mm_ThermalViasU2
1USB_C_Receptacle_USB2.0_16PConnector_USB:USB_C_Receptacle_G-Switch_GT-USB-7010ASVJ1

Similar boards

  • 2 layers285 × 94.6 mmKeyboard, the printed circuit board in 3D

    Keyboard

    FishyNavi/keyboard

    Cool HE keyboard i designed myself!

    169 parts
  • 4 layers51 × 77 mmBODAQS A8 board v1 0, the printed circuit board in 3D

    BODAQS A8 board v1 0

    benconnor1972/BODAQS

    Bicycle Open Data Acquisition System

    120 parts9
  • 2 layersInsta360-joystick, the printed circuit board in 3D

    Insta360-joystick

    jfwoods/insta360link-controller

    A lightweight daemon, CLI tool, and (optional) firmware + hardware for controlling an Insta360 Link webcam without the first-party software.

    58 parts9
  • 2 layers55.6 × 57.2 mmYkb skadi pcb, the printed circuit board in 3D

    Ykb skadi pcb

    YarmanKB/ykb-skadi-pcb

    KiCad project for YKB Skadi boards

    74 parts7Apache-2.0
  • 4 layers24 × 42 mmAura a03, the printed circuit board in 3D

    Aura a03

    Avinash1286/pendent

    AURA: open wearable note-taking device development — PCB, printable case, firmware, Next.js/Convex notes, interactive 3D site and launch film.

    61 parts
  • 2 layers38.9 × 48.9 mmPager carrier, the printed circuit board in 3D

    Pager carrier

    awong-dev/pager

    Low-powered, gps and messaging capable pager for kids

    79 parts
  • 2 layers60 × 42 mmSmart safety tag, the printed circuit board in 3D

    Smart safety tag

    balu-16/SeedGrant_Safety

    Personal-safety project: Expo / React Native client + FastAPI + PostgreSQL (Supabase) backend + React admin portal.

    83 parts
  • 4 layers56 × 52 mmEdgeLink S3 Cellular, the printed circuit board in 3D

    EdgeLink S3 Cellular

    CDonohoe-Designs/EdgeLink_S3_Cellular

    EdgeLink S3 Cellular is a four-layer embedded hardware platform combining an ESP32-S3 controller, SIM7080G cellular/GNSS modem, USB-C, battery power management and environmental/motion sensing.

    114 parts

Questions

What parts does the Smart puck use?

31 parts, built around the BQ25185DLHR, ESP32-C6-MINI-1, MAX17048G+T10 and GT-TZ084B-H015-L1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Smart puck KiCad files?

From the MichaelK-F/smart-puck repository on GitHub, at the commit this page was made from: the board is hardware/kicad/smart-puck.kicad_pcb and its schematic hardware/kicad/smart-puck.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Smart puck design in my own project?

Its repository states no licence, so its author keeps all rights: ask MichaelK-F before reusing the design.