2 layers90 × 50 mm
Vizitka usb Michal modra
Meteopresscz/PCB_Public
Design of our Business Cards and Note Pads on PCB
89 parts
2 layers151 × 212 mm
NotePad
Meteopresscz/PCB_PublicDesign of our Business Cards and Note Pads on PCB
- Size
- 151 × 212 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 223
- Nets
- 152
- Pads
- 727
- Tracks, vias
- 1,220, 155
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 23 Nov 2022
- Updated
- 13 Oct 2023
Overview
NotePad is an open-source printed circuit board by Meteopresscz, from the Meteopresscz/PCB_Public repository on GitHub. It is a 2-layer board of 151 × 212 mm with 223 parts on 152 nets, routed with 1,220 tracks and 155 vias.
It is built around the ATMEGA168A-AU, DS18B20 and DMG2307L. Its parts include 67 resistors, 23 diodes, 20 capacitors, 12 connectors and 5 transistors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
3
ATMEGA168A-AU
TQFP-32(7x7)-40℃~+85℃ 1.8V~5.5V 10bit 16KB 1KB 20MHz 23 512Byte 8 Bit AVR Built-in FLASH TQFP-32(7x7) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
DS18B20
TO-92-55℃~+125℃ 12bit 3V~5.5V 750ms Single-bus ±0.4℃ TO-92 Temperature Sensors ROHSUMWTemperature Sensors
DMG2307L
SOT-23-55℃~+150℃ 1 P-Channel 1.36W 134mΩ@4.5V 3.8A 30V 371.3pF 3V 45.9pF 51.3pF 8.2nC@10V P-Channel SOT-23 MOSFETs ROHSDiodes IncorporatedMOSFETs
Parts
223| Qty | Value | Footprint | References |
|---|---|---|---|
| 40 | R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R21, R22, R23 +24 |
| 21 | 330 | meteopress:R_0201_woSilk | R47, R48, R49, R50, R51, R52, R53, R54, R55, R56, R57, R58, R59, R60, R61, R62 +5 |
| 21 | LED | meteopress:D_0802_side_woSilk | D3, D4, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +5 |
| 16 | TestPoint | TestPoint:TestPoint_Bridge_Pitch2.54mm_Drill1.0mm | TP8, TP8, TP8, TP8, TP8, TP8, TP8, TP8, TP8, TP8, TP8, TP9, TP10, TP11, TP12, TP13 |
| 10 | 100n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C4, C8, C9, C12, C14, C17, C18, C19, C20 |
| 6 | 10u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5, C7, C10, C13, C15, C16 |
| 6 | TestPoint | TestPoint:TestPoint_Pad_1.5x1.5mm | TP14, TP15, TP18, TP19, TP20, TP21 |
| 4 | 100k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R26, R28, R38, R39 |
| 4 | 5Vn | TestPoint:TestPoint_Bridge_Pitch2.54mm_Drill1.0mm | TP22, TP23, TP29, TP30 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_Pad | H1, H2, H3, H4 |
| 3 | ? | TestPoint:TestPoint_Pad_D2.5mm | TP25, TP26, TP27 |
| 3 | L_Small | Inductor_SMD:L_0805_2012Metric_Pad1.15x1.40mm_HandSolder | L1, L2, L3 |
| 3 | Q_NPN_CBE | Package_TO_SOT_THT:TO-92L_Inline_Wide | Q1, Q3, Q5 |
| 2 | 22p | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2 |
| 2 | 5k1 | meteopress:D_0402_woSilk | R45, R46 |
| 2 | A | TerminalBlock_WAGO:TerminalBlock_WAGO_236-406_1x06_P5.00mm_45Degree | J6, J7 |
| 2 | Barrel_Jack_Switch | Connector_BarrelJack:BarrelJack_Horizontal | J9, J10 |
| 2 | DMG2307L | Package_TO_SOT_SMD:SOT-23 | Q2, Q4 |
| 2 | Frame sync | TestPoint:TestPoint_Bridge_Pitch2.54mm_Drill1.0mm | TP17, TP17 |
| 2 | LED_Small | LED_SMD:LED_0603_1608Metric_Castellated | D1, D2 |
| 1 | + | TestPoint:TestPoint_Pad_D2.5mm | TP28 |
| 1 | - | TestPoint:TestPoint_Pad_D2.5mm | TP24 |
| 1 | 1000u | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | C6 |
| 1 | 10n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C11 |
| 1 | 5Vf | TestPoint:TestPoint_Bridge_Pitch2.54mm_Drill1.0mm | TP15 |
| 1 | 5Vfilt | TerminalBlock_WAGO:TerminalBlock_WAGO_236-406_1x06_P5.00mm_45Degree | J11 |
| 1 | ATmega168A-AU | Package_QFP:TQFP-32_7x7mm_P0.8mm | U1 |
| 1 | AVR-ISP-6 | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J3 |
| 1 | Arduino_Mega2560_Shield | jenda:Arduino_Mega2560_roundedge | XA1 |
| 1 | Crystal_Small | Crystal:Crystal_SMD_SeikoEpson_MC405-2Pin_9.6x4.1mm_HandSoldering | Y1 |
| 1 | DEBUG1 | Connector_RJ:RJ45_Wuerth_7499010001A_Horizontal | RJ3 |
| 1 | DS18B20 | Package_TO_SOT_THT:TO-92_Inline | U2 |
| 1 | LED_INT | Connector_RJ:RJ45_Wuerth_7499010001A_Horizontal | RJ8 |
| 1 | LM7806_TO220 | Package_TO_SOT_THT:TO-220-3_Vertical | U3 |
| 1 | LNA | Connector_RJ:RJ45_Wuerth_7499010001A_Horizontal | RJ6 |
| 1 | LOGIC | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | J5 |
| 1 | LOGO | meteopress:logotyp2 | G*** |
| 1 | LOGO | logo:logotyp | G*** |
| 1 | LOGO | meteopress:MeteopressQR20 | G*** |
| 1 | LOGO | meteopress:MeteopressLogo_100x16 | G*** |
| 1 | LOGO | meteopress:MeteopressLogo_Bare_Inv_100x10 | G*** |
| 1 | LP38798 | jenda:DFN-12-1EP_4x4mm_Pitch0.5mm | IC1 |
| 1 | PIN2 | TestPoint:TestPoint_Pad_D2.5mm | TP2 |
| 1 | PIN3 | TestPoint:TestPoint_Pad_D2.5mm | TP4 |
| 1 | PIN4 | TestPoint:TestPoint_Pad_D2.5mm | TP6 |
| 1 | PIN6 | TestPoint:TestPoint_Pad_D2.5mm | TP1 |
| 1 | PIN7 | TestPoint:TestPoint_Pad_D2.5mm | TP3 |
| 1 | PIN8 | TestPoint:TestPoint_Pad_D2.5mm | TP5 |
| 1 | PIN9 | TestPoint:TestPoint_Pad_D2.5mm | TP7 |
| 1 | RJ1 | Connector_RJ:RJ45_Wuerth_7499010001A_Horizontal | RJ1 |
| 1 | RJ2 | Connector_RJ:RJ45_Wuerth_7499010001A_Horizontal | RJ2 |
| 1 | ROT | Connector_RJ:RJ45_Wuerth_7499010001A_Horizontal | RJ4 |
| 1 | RXPOW | Connector_Dsub:DSUB-9_Male_Horizontal_P2.77x2.84mm_EdgePinOffset7.70mm_Housed_MountingHolesOffset9.12mm | J1 |
| 1 | RXprot1 | TestPoint:TestPoint_Bridge_Pitch2.54mm_Drill1.0mm | TP16 |
| 1 | SCOPE_INT | Connector_RJ:RJ45_Wuerth_7499010001A_Horizontal | RJ5 |
| 1 | SDR | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J8 |
| 1 | STC_INT | Connector_RJ:RJ45_Wuerth_7499010001A_Horizontal | RJ7 |
| 1 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
| 1 | TXPOW | Connector_Dsub:DSUB-9_Male_Horizontal_P2.77x2.84mm_EdgePinOffset7.70mm_Housed_MountingHolesOffset9.12mm | J2 |
| 1 | UPCONV_INT | Connector_Dsub:DSUB-9_Male_Horizontal_P2.77x2.84mm_EdgePinOffset7.70mm_Housed_MountingHolesOffset9.12mm | J4 |
| 1 | USB_C_Receptacle | meteopress:PCB-USB-C_straight | J12 |
The 196 most common of 223 parts.
More from Meteopresscz/PCB_Public
6- 2 layers90 × 50 mm
- 2 layers90 × 50 mm
Vizitka usb Michal pruhledna
Meteopresscz/PCB_Public
Design of our Business Cards and Note Pads on PCB
87 parts - 2 layers90 × 50 mm
- 2 layers90 × 50 mm
- 2 layers90 × 50 mm
Vizitka usb experimental
Meteopresscz/PCB_Public
Design of our Business Cards and Note Pads on PCB
40 parts
Similar boards
- 2 layers107 × 90 mm
Wall mounted room temperature sensor ethernet
RomLab/pcb-system-for-underfloor-heating-v2.0
PCB for underfloor heating system
165 parts1 - 2 layers
- 2 layers59.2 × 41 mm
- 2 layers160 × 100 mm
Marine gps
mbouyer/marine_chartplotter
Hardware and software for an opencpn-based chartplotter
115 parts6BSD-2-Clause - 2 layers47.5 × 56.8 mm
- 2 layers112 × 79 mm
- 4 layers71 × 64 mm
UWB
victorstoica114/UWB_Module_ESP_IDF
ESP-IDF 6.0.2 firmware for the custom UWB Module V1.0 Rev.B, based on an ESP32-S3-WROOM-1-N16R8. The same application image runs on every module; persistent identity and runtime configuration select the role and active…
254 parts1 - 4 layers103 × 126 mm
Senzori iradiere
cs-pub-ro/smart-solar-irradiance-sensor
Open-source hardware & software for a smart wireless sensor that measures solar irradiance.
351 parts
Questions
How big is the NotePad PCB?
It measures 151 × 212 mm and has 2 copper layers, 1.6 mm thick.
What parts does the NotePad use?
223 parts, built around the ATMEGA168A-AU, DS18B20 and DMG2307L. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the NotePad KiCad files?
From the Meteopresscz/PCB_Public repository on GitHub, at the commit this page was made from: the board is NotePad/NotePad.kicad_pcb and its schematic BusinessCard/History/ModraSpatna/Vizitka_usb_Michal_modra.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the NotePad design in my own project?
Its repository states no licence, so its author keeps all rights: ask Meteopresscz before reusing the design.