
Kombo nrf24 stm32f030
MelexinVN/bs_kombo
Открытые системы беспроводной коммуникации «КомБО» (Беспроводные системы «КомБО»). Проект с открытым программным и аппаратным обеспечением (Open source hardware). Open wireless communication systems "КомБО".

Открытые системы беспроводной коммуникации «КомБО» (Беспроводные системы «КомБО»). Проект с открытым программным и аппаратным обеспечением (Open source hardware). Open wireless communication systems "КомБО". Open source hardware project
Kombo nrf24 stm32f030 is an open-source printed circuit board by MelexinVN, from the MelexinVN/bs_kombo repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 30.5 × 30.5 mm with 27 parts on 22 nets, routed with 265 tracks and 38 vias.
It is built around the AMS1117-3.3. Its parts include 7 capacitors, 5 resistors, 4 connectors, 3 ICs and 1 crystal. It belongs with the ESP32, STM32 and AVR (ATmega, ATtiny) boards of this library.

| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C5, C6 |
| 3 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R3, R5 |
| 2 | 10u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C7 |
| 2 | 22p | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C4 |
| 2 | 620 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R4 |
| 2 | LOGO | LOGO | G***, G*** |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | Conn_01x06 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J3 |
| 1 | Conn_01x07 | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J1 |
| 1 | Crystal | Crystal:Crystal_HC49-U_Vertical | Y1 |
| 1 | NRF24L01_Breakout | Keyplus_nordic:NRF24L01-Module-SMD | U1 |
| 1 | STM32F030F4Px | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U3 |
| 1 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP1 |
The 23 most common of 27 parts.

MelexinVN/bs_kombo
Открытые системы беспроводной коммуникации «КомБО» (Беспроводные системы «КомБО»). Проект с открытым программным и аппаратным обеспечением (Open source hardware). Open wireless communication systems "КомБО".

MelexinVN/bs_kombo
Открытые системы беспроводной коммуникации «КомБО» (Беспроводные системы «КомБО»). Проект с открытым программным и аппаратным обеспечением (Open source hardware). Open wireless communication systems "КомБО".

MelexinVN/bs_kombo
Открытые системы беспроводной коммуникации «КомБО» (Беспроводные системы «КомБО»). Проект с открытым программным и аппаратным обеспечением (Open source hardware). Open wireless communication systems "КомБО".

MelexinVN/bs_kombo
Открытые системы беспроводной коммуникации «КомБО» (Беспроводные системы «КомБО»). Проект с открытым программным и аппаратным обеспечением (Open source hardware). Open wireless communication systems "КомБО".

MelexinVN/bs_kombo
Открытые системы беспроводной коммуникации «КомБО» (Беспроводные системы «КомБО»). Проект с открытым программным и аппаратным обеспечением (Open source hardware). Open wireless communication systems "КомБО".


pascallanger/DIY-Multiprotocol-TX-Module
Multiprotocol TX Module (or MULTI-Module) is a 2.4GHz transmitter module which controls many different receivers and models.

fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io


MaltWhiskey/Mega-Cube
16x16x16 PL9823 Cube with Teensy 4.0 and FlexIO driver



shamansystems/Cheap-FOCer-2
Low-Cost Motor Controller based on the VESC 6
It measures 30.5 × 30.5 mm and has 2 copper layers, 1.6 mm thick.
27 parts, built around the AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the MelexinVN/bs_kombo repository on GitHub, at the commit this page was made from: the board is hardware/pcb/kombo_nrf24_smd_stm32f030/kombo_nrf24_stm32f030.kicad_pcb and its schematic hardware/pcb/kombo_nrf24_atmega8/kombo_nrf24_atmega8.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).