
Microcontroller
FrameworkComputer/ExpansionCards
Reference designs and documentation to create Expansion Cards for the Framework Laptop

Custom STM is an open-source printed circuit board by MayuriDhekale, from the MayuriDhekale/Project_6 repository on GitHub. It is a 2-layer board of 73.5 × 58 mm with 34 parts on 60 nets, routed with 1,009 tracks and 158 vias.
It is built around the AP2112K-3.3. Its parts include 11 capacitors, 7 resistors, 5 connectors, 2 ICs and 2 diodes. It belongs with the STM32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 100nF | Capacitor_SMD:C_0603_1608Metric | C4, C5, C6, C7, C11 |
| 3 | 10k | Resistor_SMD:R_0603_1608Metric | R4, R5, R7 |
| 2 | 1uF | Capacitor_SMD:C_0603_1608Metric | C1, C2 |
| 2 | 22pF | Capacitor_SMD:C_0603_1608Metric | C9, C10 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 2 | Conn_01x20_Pin | Connector_PinHeader_2.54mm:PinHeader_1x20_P2.54mm_Vertical | J1, J2 |
| 2 | LED | LED_SMD:LED_0603_1608Metric | D1, D2 |
| 2 | SW_Push | Button_Switch_SMD:SW_SPST_SKQG_WithoutStem | SW1, SW2 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric | C3 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | 330 | Resistor_SMD:R_0603_1608Metric | R6 |
| 1 | 4.7uF | Capacitor_SMD:C_0805_2012Metric | C8 |
| 1 | 8MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | AP2112K-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U1 |
| 1 | Conn_01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | Conn_02x05_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | J4 |
| 1 | STM32F103C8Tx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U2 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J5 |
The 30 most common of 34 parts.

FrameworkComputer/ExpansionCards
Reference designs and documentation to create Expansion Cards for the Framework Laptop



DDeGonge/OS-ARM
This arm is not industrial and it will not be fast, but that is not my goal. But it will hopefully be a very nice looking arm fully capable of 6dof motion, cheap enough to keep it accessable but capable enough to…




It measures 73.5 × 58 mm and has 2 copper layers, 1.6 mm thick.
34 parts, built around the AP2112K-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the MayuriDhekale/Project_6 repository on GitHub, at the commit this page was made from: the board is Custom STM.kicad_pcb and its schematic Custom STM.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask MayuriDhekale before reusing the design.