2 layers85.4 × 40 mm
CR RC
Albo04Flag/CR-RC_signal_shaping_PCB
Analog processing board for silicon particles detectors onboard SPaRKLE a Space Rider payload
42 parts
4 layers80 × 95 mm
5V Shifter
MatthijsRog/STMSOT-5V-ShifterTranslates the Z-scanner output of the SoftDB MK3 into something compatible with (-10,0) V scanner amplifiers.
- Size
- 80 × 95 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 68
- Nets
- 31
- Pads
- 183
- Tracks, vias
- 144, 187
- Pours
- 27
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 20 Feb 2024
- Updated
- 5 Apr 2024
Overview
5V Shifter is an open-source printed circuit board by MatthijsRog, from the MatthijsRog/STMSOT-5V-Shifter repository on GitHub, published under the MIT licence. It is a 4-layer board of 80 × 95 mm with 68 parts on 31 nets, routed with 144 tracks and 187 vias.
It is built around the ADA4625-2ARDZ, LT8330ES6#TRMPBF and ADP7142ARDZ-R7, with the ADP7182AUJZ-R7, LTC6655LNBHMS8-5#PBF and PMEG6010CEJ,115-JSM among its other parts. Its parts include 28 capacitors, 21 resistors, 7 ICs, 4 connectors and 2 inductors.
Main components
6
ADA4625-2ARDZ
SOIC-8-EP1.2uV/℃ 115dB 15pA 18MHz 48V/us 5mA 80uV Built-in compensation、High capacitive load driving、EMI filtering/RF suppression SOIC-8-EP FET Input Amplifiers ROHSAnalog DevicesFET Input Amplifiers
LT8330ES6#TRMPBF
TSOT-23-6-40℃~+125℃ 1 2MHz 3V~40V 6uA Adjustable Boost Boost、SEPIC、Inverting Built-in TSOT-23-6 DC-DC Converters ROHSAnalog DevicesDC-DC ConvertersADP7142ARDZ-R7
SOIC-8-EP-40℃~+125℃@(Tj) 1 1.2V~39V 11uVrms 200mA 40V 420mV@(200mA) 50uA 88dB@(10kHz) Fixed、Adjustable Over Current Protection、Thermal shutdown、Enable control、Input under-voltage protection、Adjustable soft-start、Built-in soft-start Positive SOIC-8-EP Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAnalog DevicesVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
ADP7182AUJZ-R7
TSOT-23-5-40℃~+125℃@(Tj) 1 1.22V~27V 185mV@(200mA) 18uVrms 200mA 28V 650uA 66dB@(10kHz) Adjustable Negative Over Current Protection、Over Temperature Protection、Enable TSOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAnalog DevicesVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
LTC6655LNBHMS8-5#PBF
MSOP-8-40℃~+125℃ 0.25ppmp-p 0.67ppmrms 13.2V 2ppm/℃ 5V 5mA 7.5mA Fixed Series MSOP-8 Voltage Reference ROHSAnalog DevicesVoltage Reference
PMEG6010CEJ,115-JSM
SOD-3231 Independent 100uA@60V 1A 25A 60V 700mV@1A SOD-323 Schottky Diodes ROHSJSMSEMISchottky Diodes
Parts
68| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 2.2uF | Capacitor_SMD:C_0603_1608Metric | C2, C4, C7, C9, C13, C31 |
| 4 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C22, C25, C27, C28 |
| 4 | 10 uF | Capacitor_SMD:C_0805_2012Metric | C23, C24, C26, C29 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_DIN965 | H2, H3, H4, H5 |
| 3 | 0.1uF | Capacitor_SMD:C_1206_3216Metric | C16, C17, C18 |
| 3 | 1Meg | Resistor_SMD:R_0603_1608Metric | R2, R4, R5 |
| 3 | 340 | Resistor_SMD:R_0603_1608Metric | R19, R21, R22 |
| 2 | 0.33uF | Capacitor_SMD:C_0603_1608Metric | C6, C8 |
| 2 | 100k | Resistor_SMD:R_0603_1608Metric | R3, R7 |
| 2 | 10k | Resistor_SMD:R_0603_1608Metric | R1, R14 |
| 2 | 10uF | Capacitor_SMD:C_2220_5650Metric | C20, C21 |
| 2 | 1nF | Capacitor_SMD:C_0603_1608Metric | C3, C14 |
| 2 | 4.64k | Resistor_SMD:R_0603_1608Metric | R8, R12 |
| 2 | 4.7uF | Capacitor_SMD:C_0805_2012Metric | C1, C12 |
| 2 | 464 | Resistor_SMD:R_0603_1608Metric | R10, R13 |
| 2 | 5.6u | 74438357056_5.6uH:74438357056_5.6uH | L1, L2 |
| 2 | ADA4625-2ARDZ | footprints:SOIC8_ADA4625-2ARDZ_ADI | U1, U2 |
| 2 | ADP7142ARDZ-R7 | ADP7142ARDZ-R7:SOIC127P600X175-9N | IC3, IC6 |
| 2 | Conn_Coaxial | Amphenol_Right_Angle_SMA_901_143_6RFX:AMPHENOL_901-143-6RFX | J3, J4 |
| 1 | 0 | Resistor_SMD:R_1206_3216Metric | R23 |
| 1 | 1020 | Resistor_SMD:R_0603_1608Metric | R20 |
| 1 | 18k | Resistor_SMD:R_0603_1608Metric | R15 |
| 1 | 1u | Capacitor_SMD:C_0603_1608Metric | C10 |
| 1 | 1uF | Capacitor_SMD:C_0805_2012Metric | C5 |
| 1 | 2.7k | Resistor_SMD:R_0603_1608Metric | R16 |
| 1 | 4.7p | Capacitor_SMD:C_0603_1608Metric | C11 |
| 1 | 46.4k | Resistor_SMD:R_0603_1608Metric | R6 |
| 1 | 52.3k | Resistor_SMD:R_0603_1608Metric | R9 |
| 1 | 53.6k | Resistor_SMD:R_0603_1608Metric | R11 |
| 1 | ADP7182AUJZ-R7 | ADP7182AUJZ-R7:SOT95P280X100-5N | IC1 |
| 1 | Conn_01x02_Socket | Connector_Molex:Molex_Micro-Fit_3.0_43045-0212_2x01_P3.00mm_Vertical | J1 |
| 1 | Conn_01x03_Socket | Connector_Molex:Molex_Micro-Fit_3.0_43650-0315_1x03_P3.00mm_Vertical | J2 |
| 1 | LT8330ES6#TRMPBF | LT8330ES6#TRMPBF:SOT95P280X100-6N | IC2 |
| 1 | LTC6655LNBHMS8-5#PBF | LTC6655LNBHMS8-5#PBF:SOP65P490X110-8N | IC4 |
| 1 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad | H1 |
| 1 | PMEG6010CEJ,115 | PMEG6010CEJ,115:SODFL2512X80N | D1 |
Similar boards
- 6 layers160 × 100 mm
- 4 layers34.5 × 34.5 mm
Readout splitter
BUNPC/NN22-Technical-Documents
Repository for the storage and dissemination of NN22 technical documents
86 parts10 - 4 layers60 × 81 mm
MYSTAT
matthew-yates/MYSTAT
Open source potentiostat/galvanostat hardware design files and required software.
93 parts9GPL-3.0 - 4 layers125 × 70 mm
- 4 layers160 × 100 mm
Hex Oscilloscope
HexFud/stm32-fpga-oscilloscope
A 1-Channel 20MHz 100MS/s Mixed-Signal Digital Storage Oscilloscope on a custom 4-layer PCB. Powered by STM32H7, Lattice iCE40 FPGA, and USB-C
120 parts1 - 4 layers150 × 150 mm
DigitalOsciloscope
PiatekBartosz/DigitalOscilloscope_Hardware
Hardware for digital oscilloscope project
387 parts1 - 4 layers65 × 45 mm
Dual Rail Power Supply
Jmanicom/Dual-Rail-Power-Supply
A low-noise lab power supply designed around the usage with audio circuits
63 partsCERN-OHL-S-2.0
Questions
How big is the 5V Shifter PCB?
It measures 80 × 95 mm and has 4 copper layers, 1.6 mm thick.
What parts does the 5V Shifter use?
68 parts, built around the ADA4625-2ARDZ, LT8330ES6#TRMPBF, ADP7142ARDZ-R7 and ADP7182AUJZ-R7. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the 5V Shifter KiCad files?
From the MatthijsRog/STMSOT-5V-Shifter repository on GitHub, at the commit this page was made from: the board is PCB Design/5V_Shifter.kicad_pcb and its schematic PCB Design/5V_Shifter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the 5V Shifter design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).