Skip to the content
PCBKitNew board
ADP7182AUJZ-R7 on a board, in 3D

ADP7182AUJZ-R7

Analog Devices

-40℃~+125℃@(Tj) 1 1.22V~27V 185mV@(200mA) 18uVrms 200mA 28V 650uA 66dB@(10kHz) Adjustable Negative Over Current Protection、Over Temperature Protection、Enable TSOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS

Extended
DatasheetJLCPCBLCSCadi/ADP7182AUJZ-R7
Category
Voltage Regulators Linear, Low Drop Out (LDO) Regulators
Package
TSOT-23-5
Pins
5

Overview

The ADP7182AUJZ-R7 is a voltage Regulators Linear, Low Drop Out (LDO) Regulator made by Analog Devices in a TSOT-23-5 package with 5 pins. -40℃~+125℃@(Tj) 1 1.22V~27V 185mV@(200mA) 18uVrms 200mA 28V 650uA 66dB@(10kHz) Adjustable Negative Over Current Protection、Over Temperature Protection、Enable TSOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.

PCBKit's library has its KiCad symbol (Regulator_Linear:ADP7182AUJZ, from KiCad's library) and its footprint (Package_TO_SOT_SMD:TSOT-23-5, from KiCad's library), ready for a KiCad board. 4,244 are in stock at JLCPCB (part C514358). 8 open-source boards in 8 repositories on GitHub use it.

Symbol

GND1VIN2EN3ADJ4VOUT5
Regulator_Linear:ADP7182AUJZFrom KiCad's library

Footprint

12345
Package_TO_SOT_SMD:TSOT-23-5From KiCad's library

Parameters

12
Features
Enable control
Noise
18uVrms
Number of Outputs
1
Operating Temperature
-40℃~+125℃@(Tj)
Output Configuration
Negative
Output Current
200mA
Output Type
Adjustable
Output Voltage
1.22V~27V
Power Supply Rejection Ratio (PSRR)
66dB@(10kHz)
Voltage - Supply
28V
Voltage Dropout
185mV@(200mA)
standby current
650uA

Order codes

1

Pinout

5
The pins of the ADP7182AUJZ-R7
PinNameType
1GNDPower in
2VINPower in
3ENInput
4ADJInput
5VOUTPower out

Open-source boards using it

All 8
  • 4 layers34.5 × 34.5 mmReadout splitter, the printed circuit board in 3D

    Readout splitter

    BUNPC/NN22-Technical-Documents

    Repository for the storage and dissemination of NN22 technical documents

    86 parts10
  • 4 layers60 × 81 mmMYSTAT, the printed circuit board in 3D

    MYSTAT

    matthew-yates/MYSTAT

    Open source potentiostat/galvanostat hardware design files and required software.

    93 parts9GPL-3.0
  • 4 layers125 × 70 mmAD4030-Current, the printed circuit board in 3D

    AD4030-Current

    BehrensG/ARTY_Z7

    Repository with test projects to learn Zynq 7000 SoC.

    194 parts1
  • 4 layers160 × 100 mmHex Oscilloscope, the printed circuit board in 3D

    Hex Oscilloscope

    HexFud/stm32-fpga-oscilloscope

    A 1-Channel 20MHz 100MS/s Mixed-Signal Digital Storage Oscilloscope on a custom 4-layer PCB. Powered by STM32H7, Lattice iCE40 FPGA, and USB-C

    120 parts1
  • 4 layers150 × 150 mmDigitalOsciloscope, the printed circuit board in 3D

    DigitalOsciloscope

    PiatekBartosz/DigitalOscilloscope_Hardware

    Hardware for digital oscilloscope project

    387 parts1
  • 4 layers65 × 45 mmDual Rail Power Supply, the printed circuit board in 3D

    Dual Rail Power Supply

    Jmanicom/Dual-Rail-Power-Supply

    A low-noise lab power supply designed around the usage with audio circuits

    63 partsCERN-OHL-S-2.0
  • 6 layers186 × 160 mmOpen TWIST rev0, the printed circuit board in 3D

    Open TWIST rev0

    louisreg/Open-TWIST

    An open-source and open-hardware benchtop neurostimulator offering precise, programmable, and arbitrary waveform generation for neuroscience research.

    824 parts
  • 4 layers80 × 95 mm5V Shifter, the printed circuit board in 3D

    5V Shifter

    MatthijsRog/STMSOT-5V-Shifter

    Translates the Z-scanner output of the SoftDB MK3 into something compatible with (-10,0) V scanner amplifiers.

    68 partsMIT

Show this part on your page

A live frame, for any web page
<iframe src="https://pcbkit.io/embed/parts/adi/ADP7182AUJZ-R7" title="ADP7182AUJZ-R7 in PCBKit" width="100%" height="480" style="border:0;border-radius:12px" allow="fullscreen" loading="lazy"></iframe>
A picture
<img src="https://pcbkit.io/embed/parts/adi/ADP7182AUJZ-R7.jpg" alt="ADP7182AUJZ-R7" width="1200" height="900">
A picture that opens the part, for a README
[![ADP7182AUJZ-R7](https://pcbkit.io/embed/parts/adi/ADP7182AUJZ-R7.jpg?size=s)](https://pcbkit.io/parts/adi/ADP7182AUJZ-R7)

Questions

Is there a KiCad symbol and footprint for the ADP7182AUJZ-R7?

Yes. The symbol is Regulator_Linear:ADP7182AUJZ and the footprint Package_TO_SOT_SMD:TSOT-23-5, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the ADP7182AUJZ-R7?

TSOT-23-5, with 5 pins. Its footprint is drawn on this page.

Where is the ADP7182AUJZ-R7 datasheet?

Analog Devices publishes it: the Datasheet link on this page opens it.

Where can I order the ADP7182AUJZ-R7?

JLCPCB lists it as part C514358, with 4,244 in stock; the sellers' links on this page open their listings.

What can replace the ADP7182AUJZ-R7?

Parts like it in the library: the ME6211C33M5G-N by MICRONE, the SPX3819M5-L-3-3/TR by MaxLinear, the RT9013-33GB by RICHTEK and the XC6219B332MR by UMW. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the ADP7182AUJZ-R7?

8 boards in 8 repositories on GitHub; the most starred are listed on this page, with their KiCad files.

Parts like it

8