ADP7142ARDZ-R7

Q: Is there a KiCad symbol and footprint for the ADP7142ARDZ-R7?

Yes. The symbol is Regulator_Linear:ADP7142ARDZ and the footprint Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

Q: What package is the ADP7142ARDZ-R7?

SOIC-8-EP, with 9 pins. Its footprint is drawn on this page.

Q: Where is the ADP7142ARDZ-R7 datasheet?

Analog Devices publishes it: the Datasheet link on this page opens it.

Q: Where can I order the ADP7142ARDZ-R7?

JLCPCB lists it as part C579268, with 56 in stock; the sellers' links on this page open their listings.

Q: What can replace the ADP7142ARDZ-R7?

Parts like it in the library: the ADP7142ARDZ by Analog Devices, the ADP7142ARDZ-5.0 by Analog Devices, the ADP7142ARDZ-1.8-R7 by Analog Devices and the ADP7142ARDZ-2.5-R7 by Analog Devices. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Q: Which open-source boards use the ADP7142ARDZ-R7?

2 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.

Analog Devices

-40℃~+125℃@(Tj) 1 1.2V~39V 11uVrms 200mA 40V 420mV@(200mA) 50uA 88dB@(10kHz) Fixed、Adjustable Over Current Protection、Thermal shutdown、Enable control、Input under-voltage protection、Adjustable soft-start、Built-in soft-start Positive SOIC-8-EP Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS

Extended

Datasheetadi/ADP7142ARDZ-R7

Category: Voltage Regulators Linear, Low Drop Out (LDO) Regulators
Package: SOIC-8-EP
Pins: 9

Overview

The ADP7142ARDZ-R7 is a voltage Regulators Linear, Low Drop Out (LDO) Regulator made by Analog Devices in a SOIC-8-EP package with 9 pins. -40℃~+125℃@(Tj) 1 1.2V~39V 11uVrms 200mA 40V 420mV@(200mA) 50uA 88dB@(10kHz) Fixed、Adjustable Over Current Protection、Thermal shutdown、Enable control、Input under-voltage protection、Adjustable soft-start、Built-in soft-start Positive SOIC-8-EP Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.

PCBKit's library has its KiCad symbol (Regulator_Linear:ADP7142ARDZ, from KiCad's library) and its footprint (Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm, from KiCad's library), ready for a KiCad board. 56 are in stock at JLCPCB (part C579268). 2 open-source boards in 2 repositories on GitHub use it.

Symbol

Regulator_Linear:ADP7142ARDZFrom KiCad's library

Footprint

Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mmFrom KiCad's library

From the datasheet

Supply, least: 2.7 V · VIN, recommended operating min · p. 3
Supply, most: 40 V · VIN, recommended operating max · p. 3
Supply, absolute maximum: 44 V · VIN to GND, absolute max · p. 5
Works from: -40 °C · Operating ambient temperature min · p. 5
Works up to: 125 °C · Operating ambient temperature max · p. 5
Junction, hottest: 150 °C · Junction temperature absolute max · p. 5
Takes working: 50 µA · IGND, typical with no load · p. 3
Takes asleep: 1.8 µA · Shutdown current typical, EN = GND · p. 3
Gives: 200 mA · Rated continuous output current max · p. 1
Current limit: 360 mA · Current-limit threshold typical · p. 3
Dropout: 30 mV · Typical at IOUT = 10 mA, VOUT = 5 V · p. 3
Dropout: 200 mV · Typical at IOUT = 200 mA, VOUT = 5 V · p. 3
Junction to air (8-Lead SOIC): 52.7 K/W · Junction to ambient, 4-layer board · p. 5
Junction to case (8-Lead SOIC): 41.5 K/W · Junction to case · p. 5
Junction to board (8-Lead SOIC): 32.7 K/W · ΨJB junction-to-board characterization parameter · p. 5
Takes working: 180 µA · typical quiescent current at full load · p. 13
Junction, hottest: 125 °C · max junction temperature for reliable operation · p. 17
Junction to air (SOIC): 181.4 K/W · typical, 50 mm² PCB copper · p. 17
Junction to air (SOIC): 145.4 K/W · typical, 100 mm² PCB copper · p. 17
Junction to air (SOIC): 89.3 K/W · typical, 500 mm² PCB copper · p. 17
Junction to air (SOIC): 77.5 K/W · typical, 1000 mm² PCB copper · p. 17
Junction to air (SOIC): 63.2 K/W · typical, 6400 mm² PCB copper · p. 17
Junction to board (8-Lead SOIC): 38.8 K/W · typical ΨJB · p. 17

What it is and has

Output noise: 11 μV rms independent of fixed output voltage · p. 1
Initial accuracy: ±0.8% · p. 1
Soft start: User programmable, LFCSP and SOIC only · p. 1
Output capacitor: Stable with 2.2 μF ceramic · p. 1
Enable: Precision enable · p. 1
Package options: 2 mm × 2 mm, 6-lead LFCSP; 8-Lead SOIC; 5-Lead TSOT · p. 1

Around it

cap 2.2 μF or greater: between VOUT and GND; Output bypass capacitor. · p. 6
cap 2.2 μF or greater: between VIN and GND; Input bypass capacitor. · p. 6
cap 2.2 μF: between VIN and GND; Input bypass capacitor; increase to match the output capacitor when output capacitance exceeds 2.2 uF. · p. 14

Specifications

Parameter	Conditions	As printed	Page
INPUT VOLTAGE RANGE VIN		min 2.7 · max 40 V	3
OPERATING SUPPLY CURRENT IGND	IOUT = 0 uA	typ 50 · max 140 uA	3
OPERATING SUPPLY CURRENT IGND	IOUT = 10 mA	typ 80 · max 190 uA	3
OPERATING SUPPLY CURRENT IGND	IOUT = 200 mA	typ 180 · max 320 uA	3
SHUTDOWN CURRENT IGND-SD	EN = GND	typ 1.8 uA	3
SHUTDOWN CURRENT IGND-SD	EN = GND, VIN = 40 V	typ 3 · max 10 uA	3
Output Voltage Accuracy VOUT	IOUT = 10 mA, TJ = 25°C	min -0.8 · max 0.8 %	3
Output Voltage Accuracy VOUT	100 uA < IOUT < 200 mA, VIN = (VOUT + 1 V) to 40 V, TJ = −40°C to +85°C	min -1.2 · max 1.5 %	3
Output Voltage Accuracy VOUT	100 uA < IOUT < 200 mA, VIN = (VOUT + 1 V) to 40 V; TJ = −40°C to +125°C	min -1.8 · max 1.8 %	3
LINE REGULATION ∆VOUT/∆VIN	VIN = (VOUT + 1 V) to 40 V	min -0.01 · max 0.01 %/V	3
LOAD REGULATION ∆VOUT/∆IOUT	IOUT = 100 uA to 200 mA; endpoint calculation	typ 0.002 · max 0.004 %/mA	3
SENSE INPUT BIAS CURRENT SENSEI-BIAS	100 uA < IOUT < 200 mA VIN = (VOUT + 1 V) to 40 V	typ 10 · max 1000 nA	3
DROPOUT VOLTAGE VDROPOUT	IOUT = 10 mA, VOUT = 5 V; applies only for output voltages above 2.7 V	typ 30 · max 60 mV	3
DROPOUT VOLTAGE VDROPOUT	IOUT = 200 mA, VOUT = 5 V; applies only for output voltages above 2.7 V	typ 200 · max 420 mV	3
START-UP TIME tSTART-UP	VOUT = 5 V	typ 380 us	3
SOFT START SOURCE CURRENT SSI-SOURCE	SS = GND	typ 1.15 uA	3
CURRENT-LIMIT THRESHOLD ILIMIT	Current at which output voltage drops to 90% of specified typical value	min 250 · typ 360 · max 460 mA	3
Thermal Shutdown Threshold TSSD	TJ rising	typ 150 °C	3
Thermal Shutdown Hysteresis TSSD-HYS		typ 15 °C	3
Input Voltage Rising UVLO RISE		max 2.69 V	3
Input Voltage Falling UVLO FALL		min 2.2 V	3
Hysteresis UVLO HYS	Undervoltage thresholds	typ 230 mV	3
Logic High ENHIGH	2.7 V ≤ VIN ≤ 40 V	min 1.15 · typ 1.22 · max 1.3 V	3
Logic Low ENLOW	2.7 V ≤ VIN ≤ 40 V	min 1.06 · typ 1.12 · max 1.18 V	3
Logic Hysteresis ENHYS	2.7 V ≤ VIN ≤ 40 V	typ 100 mV	3
Leakage Current IEN-LKG	EN = VIN or GND; 2.7 V ≤ VIN ≤ 40 V	typ 0.04 · max 1 uA	3
Delay Time tEN-DLY	From EN rising from 0 V to VIN to 0.1 × VOUT; 2.7 V ≤ VIN ≤ 40 V	typ 80 us	3
OUTPUT NOISE OUT NOISE	10 Hz to 100 kHz, all output voltage options	typ 11 uV rms	3
POWER SUPPLY REJECTION RATIO PSRR	1 MHz, VIN = 7 V, VOUT = 5 V	typ 50 dB	3
POWER SUPPLY REJECTION RATIO PSRR	100 kHz, VIN = 7 V, VOUT = 5 V	typ 68 dB	3
POWER SUPPLY REJECTION RATIO PSRR	10 kHz, VIN = 7 V, VOUT = 5 V	typ 88 dB	3
VIN to GND		min -0.3 · max 44 V	5
VOUT to GND	Maximum VIN	min -0.3 V	5
EN to GND		min -0.3 · max 44 V	5
SENSE/ADJ to GND		min -0.3 · max 6 V	5
SS to GND	Maximum VIN or +6 V, whichever is less	min -0.3 V	5
Storage Temperature Range		min -65 · max 150 °C	5
Junction Temperature (TJ) TJ		max 150 °C	5
Operating Ambient Temperature (TA) Range TA		min -40 · max 125 °C	5
θJA θJA	8-Lead SOIC; 4-layer board	typ 52.7 °C/W	5
θJC θJC	8-Lead SOIC	typ 41.5 °C/W	5
ΨJB ΨJB	8-Lead SOIC; 4-layer board	typ 32.7 °C/W	5
θJA θJA	SOIC, copper size 50 mm2	typ 181.4 °C/W	17
θJA θJA	SOIC, copper size 100 mm2	typ 145.4 °C/W	17
θJA θJA	SOIC, copper size 500 mm2	typ 89.3 °C/W	17
θJA θJA	SOIC, copper size 1000 mm2	typ 77.5 °C/W	17
θJA θJA	SOIC, copper size 6400 mm2	typ 63.2 °C/W	17
ΨJB ΨJB	8-Lead SOIC	typ 38.8 °C/W	17

Pins, by the datasheet

1 VOUT: Regulated output voltage; bypass to GND with a 2.2 uF or greater capacitor. · p. 6
2 VOUT: Regulated output voltage; bypass to GND with a 2.2 uF or greater capacitor. · p. 6
3 SENSE/ADJ: Sense input; connect to load. An external resistor divider can set the output voltage higher than the fixed output voltage. · p. 6
4 GND: Ground. · p. 6
5 EN: Drive high to turn on the regulator and low to turn it off; connect to VIN for automatic startup. · p. 6
6 SS: External capacitor determines soft-start time. Leave open for a typical 380 us startup; do not ground. · p. 6
7 VIN: Regulator input supply; bypass to GND with a 2.2 uF or greater capacitor. · p. 6
8 VIN: Regulator input supply; bypass to GND with a 2.2 uF or greater capacitor. · p. 6
EP EP: Exposed pad enhances thermal performance and is internally connected to GND; connect to the board ground plane. · p. 6

Parameters

Current Limit: 360mA
Features: Adjustable soft-start
Junction Temperature(Max): 150℃
Noise: 11uVrms
Number of Outputs: 1
Operating Temperature: -40℃~+125℃
Output Configuration: Positive
Output Current: 200mA
Output Type: Fixed
Output Voltage: 1.2V~39V
Power Supply Rejection Ratio (PSRR): 88dB@(10kHz)
Standby Current: 1.8uA
Thermal Resistance(Junction to Board): 38.8℃/W
Thermal Resistance(Junction to Case): 41.5℃/W
Voltage - Supply: 2.7V~40V
Voltage - Supply(Absolute Max): 44V
Voltage Dropout: 420mV@(200mA)

Order codes

ADP7142ARDZ-R7LCSC C579268

Pinout

The pins of the ADP7142ARDZ-R7
Pin	Name	Type
1	VOUT	Power out
2	VOUT	Passive
3	SENSE/ADJ	Input
4	GND	Power in
5	EN	Input
6	SS	Passive
7	VIN	Passive
8	VIN	Power in
9	GND	Passive

Open-source boards using it

All 2

2 layers85.4 × 40 mm
CR RC
Albo04Flag/CR-RC_signal_shaping_PCB
Analog processing board for silicon particles detectors onboard SPaRKLE a Space Rider payload
42 parts
4 layers80 × 95 mm
5V Shifter
MatthijsRog/STMSOT-5V-Shifter
Translates the Z-scanner output of the SoftDB MK3 into something compatible with (-10,0) V scanner amplifiers.
68 partsMIT

Show this part on your page

A live frame, for any web page

<iframe src="https://pcbkit.io/embed/parts/adi/ADP7142ARDZ-R7" title="ADP7142ARDZ-R7 in PCBKit" width="100%" height="480" style="border:0;border-radius:12px" allow="fullscreen" loading="lazy"></iframe>

A picture

<img src="https://pcbkit.io/embed/parts/adi/ADP7142ARDZ-R7.jpg" alt="ADP7142ARDZ-R7" width="1200" height="900">

A picture that opens the part, for a README

[![ADP7142ARDZ-R7](https://pcbkit.io/embed/parts/adi/ADP7142ARDZ-R7.jpg?size=s)](https://pcbkit.io/parts/adi/ADP7142ARDZ-R7)

Questions

Is there a KiCad symbol and footprint for the ADP7142ARDZ-R7?

Yes. The symbol is Regulator_Linear:ADP7142ARDZ and the footprint Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the ADP7142ARDZ-R7?

SOIC-8-EP, with 9 pins. Its footprint is drawn on this page.

Where is the ADP7142ARDZ-R7 datasheet?

Analog Devices publishes it: the Datasheet link on this page opens it.

Where can I order the ADP7142ARDZ-R7?

JLCPCB lists it as part C579268, with 56 in stock; the sellers' links on this page open their listings.

What can replace the ADP7142ARDZ-R7?

Parts like it in the library: the ADP7142ARDZ by Analog Devices, the ADP7142ARDZ-5.0 by Analog Devices, the ADP7142ARDZ-1.8-R7 by Analog Devices and the ADP7142ARDZ-2.5-R7 by Analog Devices. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the ADP7142ARDZ-R7?