
E ink watch
sandgum/Triangulate-ES_01-Watch
A 5mm thick smartwatch which uses an E-ink display and two OLEDs to display information while consuming very little power

Led is an open-source printed circuit board by Marijo176, from the Marijo176/Led_Kicad repository on GitHub. It is a 4-layer board of 74.2 × 53.6 mm with 14 parts on 31 nets, routed with 70 tracks and 6 vias.
It is built around the MAX30102. Its parts include 4 resistors, 3 capacitors, 3 switches and 2 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 1K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R3, R4 |
| 3 | 100n | Capacitor_THT:C_Disc_D4.7mm_W2.5mm_P5.00mm | C1, C2, C3 |
| 1 | Arduino_Nano_v3.x | Module:Arduino_Nano | A1 |
| 1 | LED | LED_THT:LED_D5.0mm | ALARM |
| 1 | MAX30102 | spo2_stuff:MAX30102_MODULE | U1 |
| 1 | SSD1306 | spo2_stuff:SSD1306 | U2 |
| 1 | SW_Push1 | Button_Switch_THT:SW_PUSH_6mm | SW1 |
| 1 | SW_Push2 | Button_Switch_THT:SW_PUSH_6mm | SW2 |
| 1 | SW_Push3 | Button_Switch_THT:SW_PUSH_6mm | SW3 |

sandgum/Triangulate-ES_01-Watch
A 5mm thick smartwatch which uses an E-ink display and two OLEDs to display information while consuming very little power

theheraldproject/herald-hardware
Permissively licensed opensource hardware designs for Herald powered wearables and beacons. Supports digital contact tracing and other eHealth approaches.

abhinav937/RP2040_SOS_band
PCB design files for RP2040 based SmartWatch. It features an accelerometer, a GPS module and a cellular module.

Epivaral/CursoIoT
Material complementario del curso: INTRODUCCIÓN A IOT, ALMACENAMIENTO EN LA NUBE Y ANÁLISIS DE DATA

Ghost3379/NX-ISD
A more sophisticated version of the Artemis Watch by Circuitmess.


Soham3126/DIY-SPO2-KiCAD-Project
A low-cost, non-invasive Pulse Oximeter (SpO2) and Heart Rate monitor based on the MAX30102 sensor and Arduino. This project features real-time PPG signal processing, I2C communication, and a custom PCB design for…

Taller-de-sistemas-embebidos-tps/tdse-tf_2-01
Trabajo Final - Taller de Sistemas Embebidos - FIUBA
It measures 74.2 × 53.6 mm and has 4 copper layers, 1.6 mm thick.
14 parts, built around the MAX30102. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Marijo176/Led_Kicad repository on GitHub, at the commit this page was made from: the board is led.kicad_pcb and its schematic led.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Marijo176 before reusing the design.