Skip to the content
2 layers120 × 80 mmEstagio Yuri v1, the printed circuit board in 3D

Medidor Smart

Size
120 × 80 mm
Copper layers
2
Thickness
1.6 mm
Parts
31
Nets
40
Pads
98
Tracks, vias
147, 8
Pours
4
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
26 Jun 2024
Updated
26 Jun 2024

Overview

Estagio Yuri v1 is an open-source printed circuit board by Marckkill, from the Marckkill/Estagio_Yuri_v1 repository on GitHub. It is a 2-layer board of 120 × 80 mm with 31 parts on 40 nets, routed with 147 tracks and 8 vias.

It is built around the HLK-PM03. Its parts include 10 resistors, 9 connectors, 5 capacitors, 4 ICs and 1 diode. It belongs with the ESP32 boards of this library.

Main components

1

Parts

31
QtyValueFootprintReferences
610KResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR2, R3, R5, R6, R8, R9
4EASTRONTerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_HorizontalJ1, J2, J3, J4
310uCapacitor_THT:C_Radial_D5.0mm_H11.0mm_P2.00mmC1, C2, C3
322Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR1, R4, R7
3V_INConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ10, J11, J12
3ZMPT101B_MODModules_Custom:ZMB101-SIZEU1, U3, U4
2CCapacitor_THT:C_Radial_D5.0mm_H11.0mm_P2.00mmC4, C5
1470Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR10
1DISPLAYConnector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_VerticalJ6
1ESP32PCM_SL_Development_Boards:DOIT_ESP32_DEVKIT_30PinsA1
1HLK-PM03Converter_ACDC:Converter_ACDC_Hi-Link_HLK-PMxxPS1
1LEDLED_THT:LED_D5.0mmD1
1V_INTerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-4-5.08_1x04_P5.08mm_HorizontalJ7
1XY-017Modules_Custom:XY-017U2

Similar boards

  • 4 layers50 × 87 mmEnergyMe Home, the printed circuit board in 3D

    EnergyMe Home

    jibrilsharafi/EnergyMe-Home

    Smart energy meter capable of monitoring up to 16 channels. Supports MQTT, REST API, Modbus TCP, InfluxDB, AWS IoT Core. Friendly UI and fully open source (PCB, schematics, components, source code)

    87 parts288GPL-3.0
  • 2 layers147 × 80 mmController, the printed circuit board in 3D

    Controller

    voltlog/Valve-Actuator

    If you are looking for sources of previous revisions (revA, revB, revC) checkout the different branches of this repo.

    93 parts108GPL-3.0
  • 2 layers87 × 87 mmEsp thermostat, the printed circuit board in 3D

    Esp thermostat

    tomikaa87/esp-thermostat

    Smart WiFi thermostat based on the well-known ESP8266 SoC.

    59 parts7GPL-3.0
  • 2 layers39 × 83 mmDimmer 2.0, the printed circuit board in 3D

    Dimmer 2.0

    ageurtse/Wifi-Dimmer

    This is all about my home build WiFi Dimmer

    27 parts6
  • 2 layers50.8 × 50.8 mmEsp switch, the printed circuit board in 3D

    Esp switch

    foxel/esp-dual-rf-switch

    LightFox Dual: esp8266 WiFi+RF dual channel switch

    29 parts6
  • 2 layers64.3 × 63 mmTriac AC Dimmer 1P, the printed circuit board in 3D

    Triac AC Dimmer 1P

    Eninspace/triac

    This project is based on esp8266 and TRIAC for control power via remote control.

    28 parts5GPL-3.0
  • 2 layers70.2 × 90 mmIntex swg pcb, the printed circuit board in 3D

    Intex swg pcb

    jingsno/intex-swg-pcb-TM1650

    Intex SWG w/TM1650 display board

    12 parts5
  • 2 layers58.4 × 101.6 mmReflow, the printed circuit board in 3D

    Reflow

    hjf/ReflowOven

    Hardware and Firmware for an ESP8266-based reflow oven controller

    53 parts4MIT

Questions

How big is the Estagio Yuri v1 PCB?

It measures 120 × 80 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Estagio Yuri v1 use?

31 parts, built around the HLK-PM03. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Estagio Yuri v1 KiCad files?

From the Marckkill/Estagio_Yuri_v1 repository on GitHub, at the commit this page was made from: the board is Estagio_Yuri_v1.kicad_pcb and its schematic Estagio_Yuri_v1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Estagio Yuri v1 design in my own project?

Its repository states no licence, so its author keeps all rights: ask Marckkill before reusing the design.