
A500-2Meg Chip RAM PinHeaders
LIV2/A500-2Meg-Chip-ram
An Adapter to retrofit a 2MB agnus into a 1MB Amiga 500/2000

Driver library for custom virtual interrupt board designed for arduino uno
InterruptExpanderPCB is an open-source printed circuit board by MalinkyZubr, from the MalinkyZubr/ArduinoInterruptExpander repository on GitHub. It is a 4-layer board with 40 parts on 44 nets.
It is built around the ATTINY85-20SU, 74AHC1G08GW and SN74HCT138PWRE4. Its parts include 17 resistors, 14 capacitors, 5 ICs, 3 connectors and 1 diode. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Driver library for custom virtual interrupt board designed for arduino uno
Personal project of mine when I realized there are only 2 external interrupts on an arduino uno. Designed a digital logic board to serialize input from 32 external devices (buttons etc) into a single interrupt pin, hence there are 32 'virtual' interrupts
ideally, these act as normal interrupts, just requiring an additional layer of software abstraction to function.
In all likelihood you are probably better off upgrading to an arduino mega with more built in interrupt pins, since without an economy of scale im going to be using relatively large SMD logic chips on the board. Doesnt lend itself to small size. Still, feel free to use this, and assemble a board (when all this is done)
| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 0.1 uf | Capacitor_SMD:C_0402_1005Metric | C1, C5, C6, C7, C8, C9, C10, C11, C12 |
| 9 | 10k | Capacitor_SMD:C_0402_1005Metric | R1, R3, R5, R7, R9, R11, R13, R15, R17 |
| 8 | 620 | Capacitor_SMD:C_0402_1005Metric | R2, R4, R6, R8, R10, R12, R14, R16 |
| 4 | 0.1uf | Capacitor_SMD:C_0402_1005Metric | C2, C3, C4, C13 |
| 2 | Conn_01x08_Pin | Connector_PinHeader_2.00mm:PinHeader_1x08_P2.00mm_Vertical | J2, J3 |
| 1 | 1 uf | Capacitor_SMD:C_0603_1608Metric | C14 |
| 1 | 74AHC1G08 | Package_TO_SOT_SMD:SOT-353_SC-70-5_Handsoldering | U5 |
| 1 | ATTINY85-20SU | InterrupterLibrary:SOIC127P798X216-8N | U1 |
| 1 | Conn_01x06_Pin | Connector_PinHeader_2.00mm:PinHeader_1x06_P2.00mm_Vertical | J1 |
| 1 | D_Zener | Diode_SMD:D_SOD-123 | D1 |
| 1 | SN74HC251PWR | InterrupterLibrary:SOP65P640X120-16N | U2 |
| 1 | SN74HC590ADT | InterrupterLibrary:SOIC127P600X175-16N | U3 |
| 1 | SN74HCT138PWRE4 | InterrupterLibrary:SOP65P640X120-16N | U4 |

LIV2/A500-2Meg-Chip-ram
An Adapter to retrofit a 2MB agnus into a 1MB Amiga 500/2000

elixpo/elixpo_chapter
Elixpo’s canonical collection for public build-and-release Chapters, bringing open-source software, reproducible research, hardware, and community contributions into one attributable record.


hb020/batterymeter
Handheld Battery AC and Time Domain characterization tool on Attiny series 2


wayri/SPIKE
PCB-focused multiphysics simulation, from board to complete assembly: PI, SI, circuits, thermal, EM/RF and mechanical workflows, with MCAD collaboration and a roadmap toward large-scale coupled assemblies.


40 parts, built around the ATTINY85-20SU, 74AHC1G08GW and SN74HCT138PWRE4. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the MalinkyZubr/ArduinoInterruptExpander repository on GitHub, at the commit this page was made from: the board is hardware/InterruptExpanderPCB/InterruptExpanderPCB/InterruptExpanderPCB.kicad_pcb and its schematic hardware/InterruptExpanderPCB/InterruptExpanderPCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask MalinkyZubr before reusing the design.