

OBC PDB
PCB design of Power Distribution Board and the On Board Computer with a ATMEGA2560 uC.
- Size
- 200 × 100.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 140
- Nets
- 220
- Pads
- 655
- Tracks, vias
- 2,130, 275
- Pours
- 10
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 8 Feb 2018
- Updated
- 11 May 2018
Overview
OBC PDB is an open-source printed circuit board by MUN-Baja, from the MUN-Baja/OBC-PDB repository on GitHub. It is a 2-layer board of 200 × 100.3 mm with 140 parts on 220 nets, routed with 2,130 tracks and 275 vias.
It is built around the ATMEGA2560-16AU, MAX6675ISA+ and DRV8825PWP, with the DS18B20, TPS565208DDC and DS1307Z+ among its other parts. Its parts include 30 capacitors, 29 connectors, 28 resistors, 14 ICs and 7 diodes. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
9ATMEGA2560-16AU
TQFP-100(14x14)-40℃~+85℃ 10bit 16MHz 256KB 4.5V~5.5V 4KB 8 Bit 86 8KB AVR Built-in FLASH TQFP-100(14x14) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)MAX6675ISA+
SOIC-8-20℃~+85℃ 3V~5.5V SPI SOIC-8 Interface - Specialized ROHSMaxim Integrated (Analog Devices)Interface - SpecializedDRV8825PWP
HTSSOP-28-EP-40℃~+85℃ 2 2.5A 200mΩ 32 8.2V~45V Bipolar Driver STEP/DIR Yes HTSSOP-28-EP Stepper Motor Driver ROHSTexas InstrumentsStepper Motor DriverDS18B20
TO-92-55℃~+125℃ 12bit 3V~5.5V 750ms Single-bus ±0.4℃ TO-92 Temperature Sensors ROHSUMWTemperature SensorsTPS565208DDC
TSOT-23-6-40℃~+125℃@(TJ) 1 4.5V~17V 500kHz 5A 760mV~7V Adjustable Buck Buck Built-in Yes TSOT-23-6 DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersDS1307Z+
SO-80℃~+70℃ 10nA 300nA 4.5V~5.5V Backup power management and battery charging、InsideSRAM/NVRAM、Programmable clock output External I2C SO-8 Real Time Clocks ROHSMaxim Integrated (Analog Devices)Real Time ClocksLP2985-33DBV
SOT-23-5-40℃~+125℃@(Tj) 1 150mA 16V 3.3V 30uVrms 45dB@(1kHz) 575mV@(150mA) 850uA Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown、Enable control、Noise bypass terminal Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsMPU-9250
QFN-24-EP(3x3)-40℃~+85℃ 2.4V~3.6V 8uA IMU (accelerometer + gyroscope) Motion event detection SPI、I2C X,Y,Z X,Y,Z ±16g ±2000dps QFN-24-EP(3x3) Accelerometers ROHSTDK InvenSenseAccelerometersPCA9306D
SO-8-40℃~+105℃ 1 1.8V~5.5V 1V~3.6V 2 2Mbps Automatic direction detection、Output enable high-impedance Bidirectional Level translator Open-drain SMBus、I2C SO-8 Translators, Level Shifters ROHSNXP SemiconductorsTranslators, Level Shifters
README
README.mdOBC-PDB
PCB design of Power Distribution Board and the On Board Computer with a ATMEGA2560 uC.
- Add 0 Ohm resistor dividers at all A-in to allow for configure voltage dividers
Parts
140| Qty | Value | Footprint | References |
|---|---|---|---|
| 22 | Screw_Terminal_01x02 | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J1, J3, J4, J5, J6, J7, J10, J11, J12, J13, J14, J15, J16, J17, J19, J20 +6 |
| 12 | 10k | Resistors_SMD:R_0805 | R10, R11, R12, R13, R14, R15, R19, R20, R21, R22, R27, R28 |
| 10 | 0.1u | Capacitors_SMD:C_0805 | C16, C17, C19, C20, C21, C22, C24, C25, C27, C29 |
| 9 | Conn_01x04 | Pin_Headers:Pin_Header_Straight_1x04_Pitch2.54mm | Disp_Buttons1, I2C1, I2C2, I2C3, OLED0, OLED1, OLED2, OLED3, OLED4 |
| 6 | Conn_01x03 | Connectors_JST:JST_XH_B03B-XH-A_03x2.50mm_Straight | Hall1, Hall2, Hall3, Hall4, Hall5, Hall6 |
| 5 | 0.1µ | Capacitors_SMD:C_0805 | C9, C10, C11, C12, C13 |
| 5 | LED | LEDs:LED_0805 | D1, D2, D3, D5, D6 |
| 4 | 10n | Capacitors_SMD:C_0805 | C14, C15, C18, C30 |
| 4 | 110 | Resistors_SMD:R_0805 | R4, R7, R8, R9 |
| 4 | MAX6675 | Housings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mm | U6, U7, U10, U11 |
| 4 | Mounting_Hole | Mounting_Holes:MountingHole_3.2mm_M3 | MK1, MK2, MK3, MK4 |
| 3 | 4.7k | Resistors_SMD:R_0805 | R16, R17, R23 |
| 3 | Conn_01x06 | Pin_Headers:Pin_Header_Straight_1x06_Pitch2.54mm | SPI1, SPI2, SPI3 |
| 2 | 0.10 | Resistors_SMD:R_0805 | R24, R25 |
| 2 | 100n | Capacitors_SMD:C_0603 | C4, C5 |
| 2 | 10k | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm | RV1, RV2 |
| 2 | 22p | Capacitors_SMD:C_0805 | C7, C8 |
| 2 | 4.7u | Capacitors_SMD:C_0805 | C23, C28 |
| 2 | SW_SPST | Buttons_Switches_SMD:SW_SPST_B3U-1000P | SW1, SW2 |
| 1 | 0.01u | Capacitors_SMD:C_0805 | C26 |
| 1 | 1.5k | Resistors_SMD:R_0805 | R26 |
| 1 | 10.2k | Resistors_SMD:R_0402 | R2 |
| 1 | 10u | Capacitors_SMD:C_0805 | C1 |
| 1 | 10uH | kicad-footprints:L-1008 | L2 |
| 1 | 110 | LEDs:LED_0805 | D4 |
| 1 | 16MHz | Crystals:Crystal_HC49-U_Vertical | Y1 |
| 1 | 1M | Resistors_SMD:R_0805 | R6 |
| 1 | 200k | Resistors_SMD:R_0805 | R18 |
| 1 | 22u | Capacitors_SMD:C_0805 | C2 |
| 1 | 22u | Capacitors_SMD:C_1210 | C3 |
| 1 | 3.3u | footprints:XAL7030 | L1 |
| 1 | 32.768k | Crystals:Crystal_C26-LF_d2.1mm_l6.5mm_Horizontal | Y2 |
| 1 | 390 | Resistors_SMD:R_0805 | R3 |
| 1 | 43 | Resistors_SMD:R_0805 | R5 |
| 1 | 47u | Capacitors_SMD:C_1206 | C6 |
| 1 | 54.9k | Resistors_SMD:R_0402 | R1 |
| 1 | ATMEGA2560-16AU | Housings_QFP:TQFP-100_14x14mm_Pitch0.5mm | U3 |
| 1 | Battery_Cell | Battery_Holders:Keystone_1058_1x2032-CoinCell | BT1 |
| 1 | Conn_01x01 | Pin_Headers:Pin_Header_Straight_1x01_Pitch2.54mm | J21 |
| 1 | Conn_01x08 | Connectors_JST:JST_XH_B08B-XH-A_08x2.50mm_Straight | J24 |
| 1 | Conn_01x09 | Pin_Headers:Pin_Header_Straight_1x09_Pitch2.54mm | LoRa1 |
| 1 | Conn_01x16 | Pin_Headers:Pin_Header_Straight_1x16_Pitch2.54mm | J25 |
| 1 | Conn_02x03_Odd_Even | Pin_Headers:Pin_Header_Straight_2x03_Pitch2.54mm | J2 |
| 1 | Conn_02x20_Top_Bottom | Pin_Headers:Pin_Header_Straight_2x20_Pitch2.54mm | J18 |
| 1 | D | Resistors_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | D7 |
| 1 | DRV8825 | Housings_SSOP:HTSSOP-32_6.1x11mm_Pitch0.65mm_ThermalPad | U13 |
| 1 | DS1307Z+ | Housings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mm | U8 |
| 1 | DS18B20 | TO_SOT_Packages_THT:TO-92_Inline_Narrow_Oval | U12 |
| 1 | GS2 | Connectors:GS2 | J22 |
| 1 | LP2985-3.3 | TO_SOT_Packages_SMD:SOT-23-5 | U1 |
| 1 | MPU-9250 | Housings_DFN_QFN:QFN-24-1EP_3x3mm_Pitch0.4mm | U9 |
| 1 | PCA9306 | Housings_SSOP:VSSOP-8_2.3x2mm_Pitch0.5mm | U5 |
| 1 | Si8660 | Housings_SOIC:SOIC-16W_5.3x10.2mm_Pitch1.27mm | U4 |
| 1 | TCA9548A_TSSOP | Housings_SSOP:TSSOP-24_4.4x7.8mm_Pitch0.65mm | U14 |
| 1 | TPS565208 | TO_SOT_Packages_SMD:TSOT-23-6 | U2 |
| 1 | uSD | Pin_Headers:Pin_Header_Straight_1x07_Pitch2.54mm | J23 |
Similar boards
- 2 layers99.3 × 78 mm

- 4 layers

- 2 layers122.5 × 58.4 mm

- 4 layers88.4 × 63.2 mm

Robot Controller PCB
akashh218/Voice-and-AI-Enabled-Intelligent-Robot-Controller-PCB
Custom 4-layer PCB for a voice and AI-enabled intelligent robot, integrating ESP32 control, dual DC motors, three servos, voice recognition, AI audio interaction, temperature monitoring, RGB LEDs, and expansion…
84 parts - 2 layers45 × 45 mm

- 2 layers68.6 × 53.3 mm

Arduino Mega 2560
ded811/Mega-Uno-2560
An Arduino-compatible ATmega2560 development board in the Arduino Uno form factor
62 parts1 - 2 layers101.6 × 53.3 mm

- 2 layers101.6 × 53.3 mm

Questions
How big is the OBC PDB PCB?
It measures 200 × 100.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the OBC PDB use?
140 parts, built around the ATMEGA2560-16AU, MAX6675ISA+, DRV8825PWP and DS18B20. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the OBC PDB KiCad files?
From the MUN-Baja/OBC-PDB repository on GitHub, at the commit this page was made from: the board is KiCAD/OBC-PDB.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the OBC PDB design in my own project?
Its repository states no licence, so its author keeps all rights: ask MUN-Baja before reusing the design.