
BitaxeGamma
bitaxeorg/bitaxeGamma
Bitaxe based on the BM1370 from the S21 Pro

Mini Oscilloscope with Arduino Nano
ATTINY 85 OSCILLOSCOPE is an open-source printed circuit board by MAATHES-THILAK-K, from the MAATHES-THILAK-K/Mini-Oscilloscope- repository on GitHub, published under the MIT licence. It is a 2-layer board of 48.5 × 43 mm with 34 parts on 20 nets, routed with 171 tracks and 33 vias.
It is built around the ATTINY85-20SU and RT9080-33GJ5. Its parts include 10 resistors, 3 capacitors, 3 connectors, 2 ICs and 1 diode. It belongs with the sensors and measurement boards and the AVR (ATmega, ATtiny) boards of this library.
This repository contains the complete PCB design files for a compact, low-cost mini oscilloscope powered by the ATtiny85 microcontroller.
The project is intended for educational, experimental, and embedded systems learning purposes.

This oscilloscope is not a replacement for professional instruments.
It is designed strictly for learning, experimentation, and demonstration purposes.
This project is open-source and intended for educational use.
Feel free to modify and improve the design with proper attribution.
MAATHES-THILAK-K
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | TP | TestPoint:TestPoint_Pad_D1.5mm | TP1, TP2, TP3, TP4, TP5, TP6 |
| 4 | 4K7 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3, R4 |
| 4 | SW_SPST | Button_Switch_THT:SW_PUSH_6mm | DOWN, HOLD, SELECT, UP |
| 3 | MH | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H1, H2, H3 |
| 2 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5, R9 |
| 2 | 10uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C3 |
| 1 | 01X04 | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J3 |
| 1 | 01x02 | Connector_JST:JST_SH_SM02B-SRSS-TB_1x02-1MP_P1.00mm_Horizontal | J2 |
| 1 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 1 | 120K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R8 |
| 1 | 12K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7 |
| 1 | 1K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R10 |
| 1 | 510K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6 |
| 1 | ATtiny85-20S | Package_SO:SOIC-8_5.3x5.3mm_P1.27mm | U1 |
| 1 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
| 1 | LOGO | LOGO | G*** |
| 1 | RT9080-33GJ5 | RT9080-33GJ5:SOT94P280X100-5N | IC1 |
| 1 | SW_Push | Button_Switch_SMD:SW_Tactile_SPST_NO_Straight_CK_PTS636Sx25SMTRLFS | SW5 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Molex_47346-0001 | J1 |

bitaxeorg/bitaxeGamma
Bitaxe based on the BM1370 from the S21 Pro

JGAguado/Smart_Plant
The Smart Plant is a board that can be plugged directly on the soil, close to the plant, that allows the measurement of the environment (soil moisture, environment temperature & illuminance), and presents the…


Valar-Systems/MiniSpeedCam
MiniSpeedCam

vroland/epdiy-hardware
Hardware design files for EPDiy: https://github.com/vroland/epdiy.



JGAguado/LIA
Low-power pet tracking platform built around Meshtastic and LoRa mesh networking
It measures 48.5 × 43 mm and has 2 copper layers, 1.6 mm thick.
34 parts, built around the ATTINY85-20SU and RT9080-33GJ5. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the MAATHES-THILAK-K/Mini-Oscilloscope- repository on GitHub, at the commit this page was made from: the board is ATTINY85_POWERED/ATTINY_85_OSCILLOSCOPE.kicad_pcb and its schematic ATTINY85_POWERED/ATTINY_85_OSCILLOSCOPE.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).