
Main panel
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

My macropad for productivity, allowing to open and close apps at the click of buttons
Productopad is an open-source printed circuit board by M4SK29, from the M4SK29/Productopad repository on GitHub. It is a 2-layer board of 59.7 × 43.2 mm with 7 parts on 15 nets, routed with 65 tracks and 0 vias.
It is built around the SK6812MINI-E. Its parts include 4 switches, 1 IC, 1 diode and 1 connector. It belongs with the keyboards and input boards and the RP2040 boards of this library.
My macropad for productivity, allowing to open and close apps at the click of buttons!
This is the base of it and
I will connect the cables for the OLED screen and glue it to the sort of platform I've made. It will be a tight fit so I may even not need to use the glue. The top will then be put on with nut and bolts or whatever they provide in the kit for it. That's pretty much it for putting the things in the case and like I said I'll be soldering the cables for the display and not use the headers(4 pin ones)
PCB in base:
top on base:
The OLED display will be put right here(in the following image) where I've cut a place for it to be there(exact dimensions)
After that I also have made some space for the jumper cables that I'll be soldering to it, here-
(the number in brackets is the needed quantity)
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | SW_Push | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW1, SW2, SW3, SW4 |
| 1 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | SK6812MINI | LED_SMD:LED_SK6812MINI_PLCC4_3.5x3.5mm_P1.75mm | D1 |
| 1 | XIAO-RP2040-DIP | OPL:XIAO-RP2040-DIP | U1 |

google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

Bastardkb/Dilemma
The Dilemma is a vertical stagger low-profile keyboard with mods.

Pwnsat/FlatSat
Flatsat v1.0 is a hardware based platform for aerospace cybersecurity research

adamws/kicad-kbplacer
KiCad plugin for automatic keyboard's key placement and routing

imchipwood/dumbpad
Simple 4x4 numpad with rotary encoder. Powered by QMK via ATmega32u4 Pro Micro

makerforgetech/modular-biped
An open source framework for creating a bipedal modular companion robot.


It measures 59.7 × 43.2 mm and has 2 copper layers, 1.6 mm thick.
7 parts, built around the SK6812MINI-E. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the M4SK29/Productopad repository on GitHub, at the commit this page was made from: the board is PCB/Productopad.kicad_pcb and its schematic PCB/Productopad.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask M4SK29 before reusing the design.