
Traeger rev 2.3.0.kicad pro
jazzmonger/Traeger-PID-Controller
Traeger Smoker/Grill Controller based on an

Soldering system for SMD electronic components on PCBs, adapted in a domestic electric oven
PCB CONTROLADORA SOLDAGEM is an open-source printed circuit board by Luk13g, from the Luk13g/SMD_Solder_Reflow repository on GitHub, published under the MIT licence. It is a 2-layer board of 99 × 81.6 mm with 40 parts on 48 nets, routed with 161 tracks and 236 vias.
It is built around the HLK-PM01, MAX6675ISA+ and LM1117-3.3. Its parts include 10 connectors, 8 resistors, 5 capacitors, 3 ICs and 1 diode.
Soldering system for SMD electronic components on PCBs, adapted in a domestic electric oven

| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 4k7 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R2, R3, R7, R8 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H5, H6, H7, H8 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_ISO7380_Pad | H1, H2, H3, H4 |
| 3 | R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4, R5, R6 |
| 2 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4, C5 |
| 2 | Conn_01x20 | Connector_PinSocket_2.54mm:PinSocket_1x20_P2.54mm_Vertical | J1, J2 |
| 1 | +THERMO- | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J6 |
| 1 | 1000uF | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | C1 |
| 1 | 10uF | Capacitor_THT:CP_Radial_Tantal_D5.0mm_P5.00mm | C2 |
| 1 | 22uF | Capacitor_THT:CP_Radial_Tantal_D6.0mm_P5.00mm | C3 |
| 1 | 5k1 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | Conn_01x01 | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J10 |
| 1 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J8 |
| 1 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J7 |
| 1 | Conn_01x06 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J9 |
| 1 | Fuse | Fuse:Fuse_Littelfuse-LVR125 | F1 |
| 1 | HLK-PM01 | Converter_ACDC:Converter_ACDC_HiLink_HLK-PMxx | PS1 |
| 1 | IN_AC | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J3 |
| 1 | LED_RCGB | LED_THT:LED_D5.0mm-4_RGB | D1 |
| 1 | LM1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | MAX6675 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | OLED | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | U2 |
| 1 | R_POT | Potentiometer_THT:Potentiometer_Alpha_RD901F-40-00D_Single_Vertical_CircularHoles | RV1 |
| 1 | S10K250 (250V) | Varistor:RV_Disc_D12mm_W3.9mm_P7.5mm | RV2 |
| 1 | SSR1 | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J4 |
| 1 | SSR2 | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J5 |
| 1 | SW_Push | Button_Switch_THT:SW_PUSH-12mm | SW1 |

jazzmonger/Traeger-PID-Controller
Traeger Smoker/Grill Controller based on an

ikatkov/hot-plate
The heating is not uniform (enough?). The father points of the hotplate are 5C colder than the center, where the ceramic heating element is located.





HenryqueFarias16/AgroTron
Projeto de Automação agrícola com microcontrolador ESP12-E

It measures 99 × 81.6 mm and has 2 copper layers, 1.6 mm thick.
40 parts, built around the HLK-PM01, MAX6675ISA+ and LM1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Luk13g/SMD_Solder_Reflow repository on GitHub, at the commit this page was made from: the board is Hardware/PCB_CONTROLADORA_SOLDAGEM.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).