
DFTBoard
juliancoy/zynqPCB
An 8-layer board in Kicad built upon Xilinx Zynq Chip. Includes sound output, HDMI, DDR3, and Arduino Uno style header for screen connection

Ponderada sem 6 is an open-source printed circuit board by LuizaRubim, from the LuizaRubim/m5-activities repository on GitHub, published under the MIT licence. It is a 2-layer board of 59 × 58.5 mm with 13 parts on 53 nets, routed with 72 tracks and 0 vias.
It is built around the APDS-9960. Its parts include 5 resistors, 3 diodes, 1 IC and 1 connector. It belongs with the RP2040 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | R | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1, R2, R3, R4, R5 |
| 3 | LED | LED_THT:LED_D3.0mm | D1, D2, D3 |
| 1 | APDS-9960 | Sensor:Avago_APDS-9960 | RGB_Sensor1 |
| 1 | BF457 | Package_TO_SOT_THT:TO-92_Inline | T1 |
| 1 | Buzzer | Buzzer_Beeper:MagneticBuzzer_ProSignal_ABI-009-RC | BZ1 |
| 1 | Conn_01x01_Pin | Connector_PinHeader_1.00mm:PinHeader_1x01_P1.00mm_Vertical | J1 |
| 1 | Pico | MCU_RaspberryPi_and_Boards:RPi_Pico_SMD_TH | U1 |

juliancoy/zynqPCB
An 8-layer board in Kicad built upon Xilinx Zynq Chip. Includes sound output, HDMI, DDR3, and Arduino Uno style header for screen connection


baldengineer/BaldSENSE_Sensor_Feather_Wing
A temperature, humidity, light, and sound sensor wing

bismarx-v1/PRTGN
OwO whats this (This repo contains electronics, mechanical and software data for a protogen visor)

bitbank2/LED_Clock
A low cost PCB project (w/firmware) for a dark-room-friendly digital clock


Twistx77/Firefly
Open WIFI-enabled RGB lamp with temperature, humidity, suspended air particles and eCO2 sensors.

It measures 59 × 58.5 mm and has 2 copper layers, 1.6 mm thick.
13 parts, built around the APDS-9960. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the LuizaRubim/m5-activities repository on GitHub, at the commit this page was made from: the board is ponderada_s6/src/ponderada_sem_6.kicad_pcb and its schematic ponderada_s6/src/ponderada_sem_6.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).