
PCB updi unbricker
k-takata/PCB_updi_unbricker
UPDI High Voltage programmer for AVR Dx/Ex and ATtiny series

Raspberry Pi uHAT for auto power management by TV
Koditvpower is an open-source printed circuit board by LubosD, from the LubosD/koditvpower repository on GitHub. It is a 2-layer board of 69.1 × 33.6 mm with 27 parts on 59 nets, routed with 263 tracks and 7 vias.
It is built around the ATTINY412-SSN, CAT24C32WI-GT3 and AO3400, with the BSS138 among its other parts. Its parts include 11 resistors, 7 connectors, 2 ICs, 2 transistors and 1 capacitor. It belongs with the AVR (ATmega, ATtiny) boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole_2.7mm_M2.5 | MountingHole:MountingHole_2.7mm_M2.5 | H1, H2, H3, H4 |
| 4 | R10k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R5, R9, R10, R11 |
| 2 | R 3.9K | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R6, R7 |
| 2 | R 5k1 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R2 |
| 1 | AO3400 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | ATtiny412-SS | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | BSS138 | Package_TO_SOT_SMD:SOT-23 | Q2 |
| 1 | C 100n | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1 |
| 1 | CAT24C32WI-GT3 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | EEPROM WRITE | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J6 |
| 1 | POWER LED / REBOOT KEY | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J7 |
| 1 | R 1K | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R8 |
| 1 | R 1k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R4 |
| 1 | R1k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R3 |
| 1 | Raspberry_Pi_2_3 | Connector_PinHeader_2.54mm:PinHeader_2x20_P2.54mm_Vertical | J3 |
| 1 | USB_B_Micro_MAIN | Connector_USB:USB_Micro-B_Amphenol_10118194_Horizontal | J5 |
| 1 | USB_B_Micro_TV | Connector_USB:USB_Micro-B_Amphenol_10118194_Horizontal | J4 |
| 1 | USB_C_MAIN | USB-C-Power-tester:TYPE-C-31-M-17_handsolder | J1 |
| 1 | USB_C_TV | USB-C-Power-tester:TYPE-C-31-M-17_handsolder | J2 |

k-takata/PCB_updi_unbricker
UPDI High Voltage programmer for AVR Dx/Ex and ATtiny series


jacob-jarick/esp-solar-contoller
esp8266 and esp32 based solar controllers targetting fronius inverter users

Wren6991/Snowflake-FPGA
A cheap iCE40 development board, designed on and for Raspberry Pi

AnaviTechnology/anavi-infrared
ANAVI Infrared pHAT is an open source hardware Raspberry Pi pHAT (add-on board) for rapid prototyping of Internet of Things (IoT) powered by free and open source software. It features:

AnaviTechnology/anavi-gardening
ANAVI Gardening uHAT is an open source hardware add-on board for Raspberry Pi that helps you develop smart solutions for monitoring and growing plants.

AnaviTechnology/anavi-light
Anavi Light pHAT is an open source hardware Raspberry Pi pHAT (add-on board) for controlling RGB LED strip powered by free and open source software. It features:

It measures 69.1 × 33.6 mm and has 2 copper layers, 1.6 mm thick.
27 parts, built around the ATTINY412-SSN, CAT24C32WI-GT3, AO3400 and BSS138. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the LubosD/koditvpower repository on GitHub, at the commit this page was made from: the board is pcb/koditvpower.kicad_pcb and its schematic pcb/koditvpower.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask LubosD before reusing the design.