

Baduino
An opensource bad usb
- Size
- 30 × 17.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 24
- Nets
- 47
- Pads
- 131
- Tracks, vias
- 214, 130
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 23 Jan 2024
- Updated
- 23 Jan 2024
Overview
Baduino is an open-source printed circuit board by Lopfi, from the Lopfi/baduino repository on GitHub, published under the MIT licence. It is a 2-layer board of 30 × 17.2 mm with 24 parts on 47 nets, routed with 214 tracks and 130 vias.
It is built around the ATMEGA32U4-MU, TF-015 and MIC5219-3.3YM5. Its parts include 8 capacitors, 3 resistors, 2 ICs, 2 connectors and 1 diode. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
3ATMEGA32U4-MU
VQFN-44-EP(7x7)-40℃~+85℃ 10bit 16MHz 1KB 2.5KB 2.7V~5.5V 26 32KB 8 Bit AVR Built-in FLASH VQFN-44-EP(7x7) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)TF-015
SMD-35℃~+85℃ 2mm Connector and Ejector MicroSD Card (TF Card) Push-Push Yes SMD SD Card / Memory Card Connector ROHSSOFNGSD Card / Memory Card ConnectorMIC5219-3.3YM5
SOT23-53.3V 500mA Peak Output Low Drop-Out (LDO) RegulatorMicrochip TechnologyUncategorised
README
README.mdbaduino
This is baduino! An open source bad usb based on the Atmega 32u4. It is inspired by and uses the firmware from Seytonics Malduino Elite. It can store up to 16 different scripts on it's SD card, each of which can be selected on the fly with 4 dip switches.
Firmware and bootloader
Get the firmware and arduino config from the malduino repository: https://github.com/Seytonic/malduino
TODO
- Make PCB a bit nicer
- Create BOM
- Create Case
- Create own firmware with PIO
- Create proper documentation
Parts
24| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP1, TP2, TP3, TP4, TP5, TP6 |
| 2 | 10u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C5 |
| 2 | 1u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4, C7 |
| 2 | 22R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2 |
| 2 | 22p | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2 |
| 1 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C8 |
| 1 | 10p | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C6 |
| 1 | 140R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
| 1 | ATmega32U4-M | Package_DFN_QFN:QFN-44-1EP_7x7mm_P0.5mm_EP5.2x5.2mm | U1 |
| 1 | Crystal_GND24 | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm_HandSoldering | Y1 |
| 1 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
| 1 | MIC5219-3.3YM5 | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | SW_DIP_x04 | Package_DIP:DIP-8_W7.62mm_SMDSocket_SmallPads | SW1 |
| 1 | TF-015 | SamacSys_Parts:TF015 | J3 |
| 1 | USB_A | Connector_USB:USB_A_CNCTech_1001-011-01101_Horizontal | J1 |
Similar boards
- 2 layers23 × 19 mm

- 2 layers43.2 × 48.3 mm

Game Robot Controller
ojoayomipo/Game-Controller
This repository includes the Gerber files, schematic diagram and PCB designs of a game controller
40 parts - 2 layers

ATmega32U4-breakout board
Sn3cor/ATmega32U4-USB-C-breakout-board
Arduino Pro Micro like ATmega32U4 USB-C breakout board
22 parts - 2 layers36.8 × 17.8 mm

- 6 layers84 × 98 mm

FujiNet-5200-Rev0
FujiNetWIFI/fujinet-hardware
Schematics and design files for FujiNet hardware
145 parts142 - 2 layers100.3 × 69.9 mm

HDD Synth Prototype MK5
MaverickUK/HDDSynth
Recreate the sound of mechanical spinning HDDs on retro PCs that use a solid state drive
112 parts16 - 4 layers96 × 78 mm

Minidisc
befinitiv/minidisc_cad
This repository contains the CAD files (PCB & mechanics) for the 8cm "minidisc" player project.
145 parts12 - 2 layers50.8 × 50.8 mm

SolarDataLogger PCB
Lopfi/solar-logger
This is a simple box with an ESP32 with a LC12S, build to replace a DataBox24G from All of Solar, which communicates with a solar inverter to collect data on power generation.
25 parts4
Questions
How big is the Baduino PCB?
It measures 30 × 17.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Baduino use?
24 parts, built around the ATMEGA32U4-MU, TF-015 and MIC5219-3.3YM5. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Baduino KiCad files?
From the Lopfi/baduino repository on GitHub, at the commit this page was made from: the board is pcb/baduino.kicad_pcb and its schematic pcb/baduino.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Baduino design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).