
USMU v10
joeltroughton/uSMU
Credit card-sized, USB-powered 4 quadrant source-measure unit hardware and firmware

A 16 bits, two-channels, analog to digital convertion board with galavnic isolation to measure pH and Orp levels in pools and similar environments
Orp pH Board is an open-source printed circuit board by Loic74650, from the Loic74650/pH_Orp_Board repository on GitHub, published under the MIT licence. It is a 2-layer board of 47 × 62.1 mm with 50 parts on 32 nets, routed with 325 tracks and 25 vias.
It is built around the ADS1115IDGS. Its parts include 24 resistors, 13 capacitors, 4 ICs and 3 connectors.
This project is based on the original project from Roberto Buti: https://github.com/reef-pi/pH-Board.
This modified version features a double input for simultaneous pH and Orp measurements on the same board, based on the ADS1115 IC.
This board is an ideal companion to the PoolMaster project: https://github.com/Loic74650/PoolMaster.
The 5Volts power supply to this board should be low noise and low drift (sorry no spec).
A alternative (and likely better) routing of the board was performed by @Gixy31 and is available here: https://github.com/Gixy31/ESP32-PoolMaster/tree/main/pH_Orp%20Board%20V2
| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 10K | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | R7, R8, R9, R10, R11, R12, R13, R14, R19, R20, R23, R24 |
| 7 | 100nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C3, C4, C9, C10, C12 |
| 4 | 0 | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | R15, R16, R17, R18 |
| 4 | 1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C5, C6, C7, C8 |
| 3 | MountingHole_3.2mm_M3_ISO7380_Pad_TopBottom | MountingHole:MountingHole_3.2mm_M3_ISO7380_Pad_TopBottom | REF1, REF2, REF3 |
| 2 | 100K | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | R1, R2 |
| 2 | 10uF | Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C11, C13 |
| 2 | 51K | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | R3, R4 |
| 2 | Conn_Coaxial | Connector_Coaxial:BNC_Amphenol_B6252HB-NPP3G-50_Horizontal | J1, J2 |
| 2 | LMP7721MA/NOPB | LMP7721MA_NOPB:SOIC127P599X175-8N | U1, U2 |
| 1 | 1M | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | R6 |
| 1 | 350K | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | R5 |
| 1 | ADM3260 | ADM3260:SOP65P780X200-20N | U4 |
| 1 | ADS1115IDGS | Package_SO:VSSOP-10_3x3mm_P0.5mm | U3 |
| 1 | Conn_01x04_Male | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | R10K | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | R22 |
| 1 | R30.9K | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | R21 |
| 1 | TestPoint GND | TestPoint:TestPoint_Pad_D2.0mm | TP3 |
| 1 | TestPoint GND Iso | TestPoint:TestPoint_Pad_D2.0mm | TP1 |
| 1 | TestPoint Vcc Iso | TestPoint:TestPoint_Pad_D2.0mm | TP2 |

joeltroughton/uSMU
Credit card-sized, USB-powered 4 quadrant source-measure unit hardware and firmware

dridri/bcflight
Raspberry Pi based drone flight controller and remote control

Bylin-code/Stradex1
STRADEX1 Documentation and Build Instructions ============== I've always wanted to put my violin skills to use in a MIDI environment, but there really isn't a controller on the market that can emulate the feel of a…


luftaquila/monolith
DIY wireless real-time datalogging platform for Student Formula and Baja.

doppelgrau/esp32-f9p-io-board
An IO-PCB (two motor-driver/H-bridge, CAN, RS232, ADS1115, relay, ethernet, ardusimple f9p compatible connector) with an ESP32 for 12V power, three 15V tolerant analog inputs, three 5V tolerant inputs.


joeltroughton/nanoAmmeter
A small ammeter for measuring printed glucose biosensors
It measures 47 × 62.1 mm and has 2 copper layers, 1.6 mm thick.
50 parts, built around the ADS1115IDGS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Loic74650/pH_Orp_Board repository on GitHub, at the commit this page was made from: the board is Orp-pH Board/Orp-pH Board.kicad_pcb and its schematic Orp-pH Board/Orp-pH Board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).