Skip to the content
2 layers96 × 95.8 mmMakrokeyboard, the printed circuit board in 3D

Open Source Makrokeyboard based on Atmega32U4

Size
96 × 95.8 mm
Copper layers
2
Thickness
1.6 mm
Parts
94
Nets
84
Pads
334
Tracks, vias
707, 38
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
28 Feb 2021
Updated
26 Jun 2023

Overview

Makrokeyboard is an open-source printed circuit board by Linzm99, from the Linzm99/Makrokeyboard repository on GitHub. It is a 2-layer board of 96 × 95.8 mm with 94 parts on 84 nets, routed with 707 tracks and 38 vias.

It is built around the ATMEGA32U4. Its parts include 41 diodes, 20 switches, 8 crystals, 1 IC and 1 fuse. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

1

README

README.md

Makrokeyboard

Open Source Makrokeyboard based on Atmega32U4 Image Makrokeyboard wide

Code

The Code for the Makrokeyboard was written for the Arduino IDE, which supports the Atmega32U4 as Arduino Leonardo/Pro Micro. For uploading "Arduino Leonardo" or "Arduino (Pro) Micro" should be selected as Board. The COM Port selector will show the Atmega32U4 as well. Hint: If your Chip wasn't flashed with a bootloader you have to do that first. This requires soldering a ISP Connector and flashing via (for example) Arduino ISP. Tutorial from Leon Anavi

Image Makrokeyboard close

Parts

Following Parts are required:

  • 1x USB-C-Connector
  • 2x 5k1 Resistor 0805
  • 1x FSMD050R
  • 1x 0R Resistor
  • 21x SK6812 rear mounted addressable LED
  • 20x Diodes 0805
  • 20x Keyboard Switches
  • 1x 16MHz Quarz
  • 1x Atmega32U4 TQFP44
  • 6x 100nF 1206
  • 2x 1uF 1206
  • 2x 22pF 1206
  • 21x 10k Resistor 0603
  • 3x 22R 1206

Image Makrokeyboard top

Created by Linze99

Parts

94
QtyValueFootprintReferences
21ADR_LEDjl_LEDS:SK6812rLED1, LED2, LED3, LED4, LED10, LED11, LED12, LED13, LED14, LED15, LED16, LED17, LED18, LED19, LED20, LED21 +5
20CHjl_switch:CHERRYMXS1, S2, S3, S4, S5, S10, S11, S12, S13, S14, S15, S16, S17, S18, S19, S20 +4
20Diodejl_diode:0805dD1, D2, D3, D4, D5, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20 +4
6100nFjl_smd:1206100nF, 100nF, 100nF, 100nF, 100nF, 100nF
610kjl_smd:060310k, 10k, 10k, 10k, 10k, 10k
4Mountjl_mechanical:Mount3mmX3, X4, X5, X6
21uFjl_smd:12061uF, 1uF
222Rjl_smd:120622R, 22R
222pFjl_smd:120622pF, 22pF
25k1jl_smd:08055k1, 5k1
1*REFjl_USB:USB-TYPE-CX2
10Rjl_smd:120622R
116Mhzjl_xtal:SMD_CrystalY1
1Atmega32U4jl_Microcontrollers:TQFP44U1
1FSMD050Rjl_smd:1812F1
1Progsteckerjl_Progstecker:Progstecker_altX7
1Progsteckerjl_Progstecker:ProgsteckerX1

The 92 most common of 94 parts.

Similar boards

  • 2 layers89 × 100 mmHub16, the printed circuit board in 3D

    Hub16

    joshajohnson/Hub16

    A macro pad with 16 keys, two rotary encoders, a four port USB hub, and plenty of LEDs!

    132 parts388
  • 2 layers22.9 × 36.7 mmUsb2usb, the printed circuit board in 3D

    Usb2usb

    tmk/USB2USB_Converter

    USB to USB keyboard protocol converter supported by TMK keyboard firmware

    26 parts152
  • 2 layers303.6 × 96.1 mmKyuu, the printed circuit board in 3D

    Kyuu

    Quantrik/Kyuu

    Kyuu Keyboard Design

    154 parts127
  • 2 layers114.9 × 77 mmTestProject, the printed circuit board in 3D

    TestProject

    Quarren42/SPIN

    12 key, 3 encoder USB-C Macro Pad

    117 parts104CC-BY-SA-4.0
  • 2 layers444.1 × 151.2 mmGh80-3003, the printed circuit board in 3D

    Gh80-3003

    evyd13/gh80-series

    GH80-1800, GH80-3700 and GH80-3003 by Evy (aka anykeys.eu)

    287 parts69CC-BY-SA-4.0
  • 2 layers232.2 × 76.7 mmCpm43, the printed circuit board in 3D

    Cpm43

    Gtrx0/cpm43

    40% mechanical keyboard with rgb underglow and single color backlight

    188 parts59
  • 2 layers373.2 × 131.8 mmNt980, the printed circuit board in 3D

    Nt980

    evyd13/nt-series

    Replacement PCBs for the FC660m, FC750r and FC980m.

    242 parts56CC-BY-SA-4.0
  • 2 layers17.8 × 33 mmAlvaro, the printed circuit board in 3D

    Alvaro

    Kaleidogeist/Alvaro

    Pro Micro-compatible 32u4 Breakout Board

    28 parts53Apache-2.0

Questions

How big is the Makrokeyboard PCB?

It measures 96 × 95.8 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Makrokeyboard use?

94 parts, built around the ATMEGA32U4. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Makrokeyboard KiCad files?

From the Linzm99/Makrokeyboard repository on GitHub, at the commit this page was made from: the board is KiCAD/Makrokeyboard.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Makrokeyboard design in my own project?

Its repository states no licence, so its author keeps all rights: ask Linzm99 before reusing the design.